dbo:abstract
- The Ford 335 engine family was a group of engines built by the Ford Motor Company between 1969 and 1982. The "335" designation reflected Ford management's decision to produce an engine of that size (335 cubic inches) with room for expansion during its development. This engine family began production in late 1969 with a 351 cu in (5.8 L) engine, commonly called the 351C. It later expanded to include a 400 cu in (6.6 L) engine which used a taller version of the engine block, commonly referred to as a tall deck engine block, a 351 cu in (5.8 L) tall deck variant, called the 351M, and a 302 cu in (4.9 L) engine which was exclusive to Australia. The 351C, introduced in 1969 for the 1970 model year, is commonly referred to as the 351 Cleveland after the Brook Park, Ohio, Cleveland Engine plant in which most of these engines were manufactured. This plant complex included a gray iron foundry (Cleveland Casting Plant), and two engine assembly plants (Engine plant 1 & 2 ). As newer automobile engines began incorporating aluminum blocks, Ford closed the casting plant in May 2012. The 335 series engines were used in mid- and full-sized cars and light trucks, (351M/400 only) at times concurrently with the Windsor small-block family, the 351 Windsor, in cars. These engines were also used as a replacement for the FE V8 family in both the car and truck lines. The 335 series only outlived the FE series by a half-decade, being replaced by the more compact Windsor V8s. (en)
- Ford 335 är en motorserie som tillverkades av Ford Motor Company mellan 1970 och 1985. Serien omfattar bensindrivna V8-motorer med slagvolym på 302, 351 och 400 kubiktum. Alla motorer har en borrning på 4 tum, men har olika slaglängd. (sv)
rdfs:comment
- Ford 335 är en motorserie som tillverkades av Ford Motor Company mellan 1970 och 1985. Serien omfattar bensindrivna V8-motorer med slagvolym på 302, 351 och 400 kubiktum. Alla motorer har en borrning på 4 tum, men har olika slaglängd. (sv)
- The Ford 335 engine family was a group of engines built by the Ford Motor Company between 1969 and 1982. The "335" designation reflected Ford management's decision to produce an engine of that size (335 cubic inches) with room for expansion during its development. This engine family began production in late 1969 with a 351 cu in (5.8 L) engine, commonly called the 351C. It later expanded to include a 400 cu in (6.6 L) engine which used a taller version of the engine block, commonly referred to as a tall deck engine block, a 351 cu in (5.8 L) tall deck variant, called the 351M, and a 302 cu in (4.9 L) engine which was exclusive to Australia. (en)