ISO 13849 (original) (raw)
Die Norm EN ISO 13849 ist eine sicherheitsspezifische Norm, welche sich mit Gestaltungsleitsätzen zu sicherheitsbezogenen Teilen von Steuerungen beschäftigt. Der Teil 1 definiert allgemeine Gestaltungsleitsätze, Teil 2 beschreibt die Validierung.
| Property | Value |
|---|---|
| dbo:abstract | Die Norm EN ISO 13849 ist eine sicherheitsspezifische Norm, welche sich mit Gestaltungsleitsätzen zu sicherheitsbezogenen Teilen von Steuerungen beschäftigt. Der Teil 1 definiert allgemeine Gestaltungsleitsätze, Teil 2 beschreibt die Validierung. (de) ISO 13849 segurtasun-estandar bat da, kontrol-sistemetan prestazio-maila (PL) ezberdinak ezartzeko beharrezkoak diren segurtasun-neurriak azaltzen dituena. araua ordezkatu zuen 2011ko abenduan. Estandarra 2 atalatan banatuta dago: * 1. atala: Diseinurako oinarri orokorrak deskribatzen ditu. * 2. atala: Balidazioa deskribatzen du. (eu) ISO 13849 is a safety standard which applies to parts of machinery control systems that are assigned to providing safety functions (called safety-related parts of a control system). The standard is one of a group of sector-specific functional safety standards that were created to tailor the generic system reliability approaches, e.g., IEC 61508, MIL-HDBK-217, MIL-HDBK-338, to the needs of a particular sector. ISO 13849 is simplified for use in the machinery sector. The standard has two parts: * ISO 13849-1, Part 1: General principles for design, provides safety requirements and guidance on the principles of design and integration of safety-related parts of control systems (hardware or software). * ISO 13849-2, Part 2: Validation, specifies the procedures to be followed for validating by analysis or tests, the safety functions of the system, the category achieved and the performance level achieved. ISO 13849 is designed for use in machinery with high to continuous demand rates. According to IEC 61508, a HIGH demand rate is once or more per year of operation, and a CONTINUOUS demand rate is much, much more frequent than HIGH. For systems with a LOW demand rate, i.e., less than once-per-year, see IEC 61508, or the appropriate sector-specific standard such as IEC 61511. The standard is developed and maintained by ISO/TC 199, Safety of machinery, Working Group 8 — Safe Control Systems. The scope of ISO 13849 includes control systems using mechanical, electrical, electronic, and fluidic (hydraulic and pneumatic) technologies. According to an informal stakeholder survey done in 2013, more than 89% of machine builders and more than 90% of component manufacturers and service providers use ISO 13849 as the primary functional safety standard for their products. (en) ISO 13849名稱為《機械安全- 控制系統的安全相關部分》（Safety of machinery -- Safety-related parts of control systems），是和安全相關的控制系統有關的國際標準，建立了許多不同的安全性能水準（PL）。ISO 13849在2011年11月起取代EN 954-1法規。 * 第一部份說明一般的設計原則。 * 第二部份說明確認方式。 (zh) |
| dbo:wikiPageID | 40679641 (xsd:integer) |
| dbo:wikiPageLength | 14597 (xsd:nonNegativeInteger) |
| dbo:wikiPageRevisionID | 1120749033 (xsd:integer) |
| dbo:wikiPageWikiLink | dbc:ISO_standards dbr:Failure_mode,_effects,_and_criticality_analysis dbr:Failure_mode_and_effects_analysis dbr:Failure_modes,_effects,_and_diagnostic_analysis dbr:International_Organization_for_Standardization dbc:Safety_codes dbr:Block_diagram dbc:Reliability_analysis dbr:Control_systems dbr:Machinery dbr:Verification_and_validation dbr:IEC_61508 dbr:IEC_61511 |
| dbp:wikiPageUsesTemplate | dbt:ISO_standards dbt:Reflist dbt:Short_description |
| dcterms:subject | dbc:ISO_standards dbc:Safety_codes dbc:Reliability_analysis |
| rdf:type | yago:WikicatSafetyCodes yago:Abstraction100002137 yago:Code106667317 yago:Communication100033020 yago:Measure100033615 yago:WikicatISOStandards yago:WrittenCommunication106349220 yago:Standard107260623 yago:SystemOfMeasurement113577171 |
| rdfs:comment | Die Norm EN ISO 13849 ist eine sicherheitsspezifische Norm, welche sich mit Gestaltungsleitsätzen zu sicherheitsbezogenen Teilen von Steuerungen beschäftigt. Der Teil 1 definiert allgemeine Gestaltungsleitsätze, Teil 2 beschreibt die Validierung. (de) ISO 13849 segurtasun-estandar bat da, kontrol-sistemetan prestazio-maila (PL) ezberdinak ezartzeko beharrezkoak diren segurtasun-neurriak azaltzen dituena. araua ordezkatu zuen 2011ko abenduan. Estandarra 2 atalatan banatuta dago: * 1. atala: Diseinurako oinarri orokorrak deskribatzen ditu. * 2. atala: Balidazioa deskribatzen du. (eu) ISO 13849名稱為《機械安全- 控制系統的安全相關部分》（Safety of machinery -- Safety-related parts of control systems），是和安全相關的控制系統有關的國際標準，建立了許多不同的安全性能水準（PL）。ISO 13849在2011年11月起取代EN 954-1法規。 * 第一部份說明一般的設計原則。 * 第二部份說明確認方式。 (zh) ISO 13849 is a safety standard which applies to parts of machinery control systems that are assigned to providing safety functions (called safety-related parts of a control system). The standard is one of a group of sector-specific functional safety standards that were created to tailor the generic system reliability approaches, e.g., IEC 61508, MIL-HDBK-217, MIL-HDBK-338, to the needs of a particular sector. ISO 13849 is simplified for use in the machinery sector. The standard has two parts: (en) |
| rdfs:label | EN ISO 13849 (de) ISO 13849 (eu) ISO 13849 (en) ISO 13849 (zh) |
| owl:sameAs | freebase:ISO 13849 yago-res:ISO 13849 wikidata:ISO 13849 dbpedia-de:ISO 13849 dbpedia-eu:ISO 13849 dbpedia-zh:ISO 13849 https://global.dbpedia.org/id/JTge |
| prov:wasDerivedFrom | wikipedia-en:ISO_13849?oldid=1120749033&ns=0 |
| foaf:isPrimaryTopicOf | wikipedia-en:ISO_13849 |
| is dbo:wikiPageWikiLink of | dbr:Profinet dbr:MTTFd dbr:Presence_sensing_device dbr:Functional_safety dbr:Failure_modes,_effects,_and_diagnostic_analysis dbr:List_of_International_Organization_for_Standardization_standards,_12000-13999 dbr:Automotive_Safety_Integrity_Level dbr:Fieldbus dbr:IO-Link |
| is foaf:primaryTopic of | wikipedia-en:ISO_13849 |