Pair gain (original) (raw)
In telephony, pair gain is the transmitting of multiple POTS signals over the twisted pairs traditionally used for a single traditional subscriber line in telephone systems. Pair gain has the effect of creating additional subscriber lines. This is typically used as an expedient way to solve subscriber line shortage problems by using existing wiring, instead of installing new wires from the central office to the customer premises. The term was invented in the middle 20th century by analogy with earlier use of gain to extend telephone local loops far from the telephone exchange.
| Property | Value |
|---|---|
| dbo:abstract | In telephony, pair gain is the transmitting of multiple POTS signals over the twisted pairs traditionally used for a single traditional subscriber line in telephone systems. Pair gain has the effect of creating additional subscriber lines. This is typically used as an expedient way to solve subscriber line shortage problems by using existing wiring, instead of installing new wires from the central office to the customer premises. The term was invented in the middle 20th century by analogy with earlier use of gain to extend telephone local loops far from the telephone exchange. A pair gain system consists of concentrators or multiplexers which combine the separate signals into a single signal which is transmitted through the existing copper cable pair. The signals are then separated into individual subscriber lines at the customer premises. The pair gain unit which performs the multiplexing can simply provide a second telephone connection over a single subscriber line (called an Analog Multi-Line Carrier or AML) in circumstances where a customer wants to add a new phone line for a fax machine or dial-up internet connection. A larger analog pair gain system made by Anaconda in the 1960s provided seven lines. Some pair gain units can expand the number of subscriber lines available over a single copper pair to as many as sixty. Large pair gain units are stored in serving area interfaces or metal cabinets typically resembling small apartment-sized refrigerators alongside or near roadways that overlie communications rights-of-way. DACS (Digital Access Carrier System) is a form of pair gain used in the United Kingdom. It uses a form of time-division multiple access called ISDN. Analog pair gain came into disfavor in the 21st century, as it is detrimental to high speed dial-up modem connections, does not support 56k and is incompatible with digital subscriber line (DSL) systems. 20th century Subscriber Loop Carrier systems had similar problems. More recent digital pair gain systems, however, restore 56k and DSL capabilities by performing the functions of a DSLAM at the pair gain device. More recently, the term pair gain has been used to refer to any multiplex/demultiplex unit used between the central office and end users, not just equipment used with copper twisted pair. Where digital loop carrier (called Remote Integrated Multiplexer in Australia) is installed, broadband Internet subscribers may be disappointed when informed that although initial line checks were successful, high speed connections such as ADSL are unavailable due to infrastructure issues. The problem is that pair gain lines cannot carry high speed data. (en) |
| dbo:wikiPageID | 733777 (xsd:integer) |
| dbo:wikiPageLength | 3272 (xsd:nonNegativeInteger) |
| dbo:wikiPageRevisionID | 1032985967 (xsd:integer) |
| dbo:wikiPageWikiLink | dbr:56k dbr:United_Kingdom dbr:Telephony dbc:Local_loop dbc:Multiplexing dbr:Concentrator dbr:Remote_concentrator dbr:Party_line_(telephony) dbr:Time-division_multiple_access dbr:Twisted_pair dbr:Local_loop dbr:Anaconda_Copper dbr:DSLAM dbr:Digital_loop_carrier dbr:Digital_subscriber_line dbr:Telephone dbr:Telephone_exchange dbr:Refrigerator dbr:ADSL dbr:Dial-up dbr:Plain_Old_Telephone_Service dbr:Enclosure_(electrical) dbr:DACS_(Digital_Access_Carrier_System) dbr:ISDN dbr:Multiplexer dbr:Serving_area_interface dbr:Broadband_Internet dbr:Subscriber_Loop_Carrier dbr:Fax_machine dbr:Subscriber_line |
| dbp:wikiPageUsesTemplate | dbt:Refimprove dbt:Reflist dbt:Telephony-stub |
| dcterms:subject | dbc:Local_loop dbc:Multiplexing |
| gold:hypernym | dbr:Method |
| rdf:type | dbo:Software |
| rdfs:comment | In telephony, pair gain is the transmitting of multiple POTS signals over the twisted pairs traditionally used for a single traditional subscriber line in telephone systems. Pair gain has the effect of creating additional subscriber lines. This is typically used as an expedient way to solve subscriber line shortage problems by using existing wiring, instead of installing new wires from the central office to the customer premises. The term was invented in the middle 20th century by analogy with earlier use of gain to extend telephone local loops far from the telephone exchange. (en) |
| rdfs:label | Pair gain (en) |
| owl:sameAs | freebase:Pair gain wikidata:Pair gain https://global.dbpedia.org/id/4tGRt |
| prov:wasDerivedFrom | wikipedia-en:Pair_gain?oldid=1032985967&ns=0 |
| foaf:isPrimaryTopicOf | wikipedia-en:Pair_gain |
| is dbo:wikiPageRedirects of | dbr:Pair-gain dbr:Pair_gain_system dbr:Digital_pair_gain |
| is dbo:wikiPageWikiLink of | dbr:Telephony dbr:Tone_remote dbr:Remote_concentrator dbr:MOSFET_applications dbr:Party_line_(telephony) dbr:DPG dbr:Dial-up_Internet_access dbr:Digital_loop_carrier dbr:History_of_the_telephone dbr:Mixed-signal_integrated_circuit dbr:Telephone_exchange dbr:Digital_access_carrier_system dbr:Main_distribution_frame dbr:Subscriber_loop_carrier dbr:Verizon_New_York dbr:Pair-gain dbr:Pair_gain_system dbr:Digital_pair_gain |
| is foaf:primaryTopic of | wikipedia-en:Pair_gain |