Polyphase quadrature filter (original) (raw)
A polyphase quadrature filter, or PQF, is a filter bank which splits an input signal into a given number N (mostly a power of 2) of equidistant sub-bands. These sub-bands are subsampled by a factor of N, so they are critically sampled.An important application of the polyphase filters (of FIR type) concerns the filtering and decimation of large band (and so high sample rate) input signals, e.g. coming from a high rate ADC, which can not be directly processed by an FPGA or in some case by an ASIC either. If the ADC plus FPGA/ASIC interface implements a demultiplexer of the ADC samples in N internal FPGA/ASIC registers, the polyphase filter transforms the decimator FIR filter canonic structure in N parallel branches clocked at 1/N of the ADC clock, allowing digital processing when N=Clock(ADC
| Property | Value |
|---|---|
| dbo:abstract | A polyphase quadrature filter, or PQF, is a filter bank which splits an input signal into a given number N (mostly a power of 2) of equidistant sub-bands. These sub-bands are subsampled by a factor of N, so they are critically sampled.An important application of the polyphase filters (of FIR type) concerns the filtering and decimation of large band (and so high sample rate) input signals, e.g. coming from a high rate ADC, which can not be directly processed by an FPGA or in some case by an ASIC either. If the ADC plus FPGA/ASIC interface implements a demultiplexer of the ADC samples in N internal FPGA/ASIC registers, the polyphase filter transforms the decimator FIR filter canonic structure in N parallel branches clocked at 1/N of the ADC clock, allowing digital processing when N=Clock(ADC)/Clock(FPGA). This critical sampling introduces aliasing. Similar to the MDCT time domain alias cancellation the aliasing of polyphase quadrature filters is canceled by neighbouring sub-bands, i.e. signals are typically stored in two sub-bands. Note that signal in odd subbands is stored . PQF filters are used in MPEG-1 Audio Layer I and II, Musepack (which was based on MPEG-1 layer II), in MPEG-1 Layer III with an additional MDCT, in MPEG-4 AAC-SSR for the 4 band PQF bank, in MPEG-4 V3 SBRfor the analysis of the upper spectral replicated band, and in DTS. PQF has an advantage over the very similar stacked quadrature mirror filter (QMF). Delay and computational effort are much lower. A PQF filter bank is constructed using a base filter, which is a low-pass at fs/4N. This lowpass is modulated by N cosine functions and converted to N band-passes with a bandwidth of fs/2N. The base lowpass is typically a FIR filter with a length of 10*N ... 24*N taps. Note that it is also possible to build PQF filters using recursive IIR filters. (en) |
| dbo:wikiPageID | 237147 (xsd:integer) |
| dbo:wikiPageLength | 2838 (xsd:nonNegativeInteger) |
| dbo:wikiPageRevisionID | 1028318229 (xsd:integer) |
| dbo:wikiPageWikiLink | dbr:Propagation_delay dbr:Infinite_impulse_response dbr:Musepack dbr:Cosine dbr:Low-pass_filter dbr:MP3 dbr:MPEG-1_Audio_Layer_I dbr:MPEG-1_Audio_Layer_II dbr:MPEG-4_AAC-SSR dbr:Sub-band dbr:Time_domain_alias_cancellation dbr:Aliasing dbc:Digital_signal_processing dbr:Finite_impulse_response dbr:Band-pass_filter dbr:Bandwidth_(signal_processing) dbr:Quadrature_mirror_filter dbc:Linear_filters dbr:Modified_discrete_cosine_transform dbr:Filter_bank dbr:Sample_(signal) dbr:Spectral_Band_Replication dbr:Digital_Theatre_System dbr:Frequency_inverted |
| dbp:wikiPageUsesTemplate | dbt:Technical dbt:Signal-processing-stub |
| dct:subject | dbc:Digital_signal_processing dbc:Linear_filters |
| gold:hypernym | dbr:Bank |
| rdf:type | yago:WikicatLinearFilters yago:Artifact100021939 yago:Device103183080 yago:Filter103339643 yago:Instrumentality103575240 yago:Object100002684 yago:PhysicalEntity100001930 dbo:Bank yago:Whole100003553 |
| rdfs:comment | A polyphase quadrature filter, or PQF, is a filter bank which splits an input signal into a given number N (mostly a power of 2) of equidistant sub-bands. These sub-bands are subsampled by a factor of N, so they are critically sampled.An important application of the polyphase filters (of FIR type) concerns the filtering and decimation of large band (and so high sample rate) input signals, e.g. coming from a high rate ADC, which can not be directly processed by an FPGA or in some case by an ASIC either. If the ADC plus FPGA/ASIC interface implements a demultiplexer of the ADC samples in N internal FPGA/ASIC registers, the polyphase filter transforms the decimator FIR filter canonic structure in N parallel branches clocked at 1/N of the ADC clock, allowing digital processing when N=Clock(ADC (en) |
| rdfs:label | Polyphase quadrature filter (en) |
| owl:sameAs | freebase:Polyphase quadrature filter yago-res:Polyphase quadrature filter wikidata:Polyphase quadrature filter https://global.dbpedia.org/id/c6mR |
| prov:wasDerivedFrom | wikipedia-en:Polyphase_quadrature_filter?oldid=1028318229&ns=0 |
| foaf:isPrimaryTopicOf | wikipedia-en:Polyphase_quadrature_filter |
| is dbo:wikiPageDisambiguates of | dbr:Polyphase |
| is dbo:wikiPageRedirects of | dbr:PQF |
| is dbo:wikiPageWikiLink of | dbr:MPEG-4_Part_3 dbr:Musepack dbr:MPEG-1 dbr:Polyphase dbr:Modified_discrete_cosine_transform dbr:PQF |
| is foaf:primaryTopic of | wikipedia-en:Polyphase_quadrature_filter |