Mudry CAP 10 (original) (raw)

From Wikipedia, the free encyclopedia

CAP 10
CAP 10B #41
General information
Type Aerobatic aircraft
Manufacturer Avions Mudry & CieApex AircraftRobin Aircraft
Designer Nenad Hrisafović
Number built 300+
History
Manufactured 1970-2007 and 2021-
First flight 1968
Developed from Piel Super Emeraude

The Mudry CAP 10 is a two-seat training aerobatic aircraft first built in 1970 and still in production in 2007. The plane was developed from the Piel Super Emeraude and was born as the CP100. The name changed to CAP 10, CAP for 'Constructions Aéronautiques Parisiennes'. The CAP 10 was manufactured by Mudry (name of its designer) in Bernay, France, bought by CAP Industries which then became Apex Aircraft. Following the bankruptcy of Apex in 2008, rights to produce spares were awarded to Dyn'Aviation. After the bankruptcy of DynAero in 2012,[1] manufacture of spares was taken over by CEAPR in Darois.

Design and development

[edit]

The prototype C.P. 100 was first flown in August 1968 and was followed by the production variants, the CAP 10 and CAP 10B which had revised tail surfaces. The CAP 10 is a low-wing cantilever monoplane of wooden construction, with the CAP 10C having a carbon sandwich wing spar.

The engine is a 180 hp (130 kW) Lycoming AEIO-360 fuel injection engine, fully lubricated in inverted flight.

300+ aircraft were built between 1970 and 2007 and an updated version of the CAP 10C is produced by Robin Aircraft as the CAP 10C NG since 2021.

The CAP 10 is one of the most successful aerobatic training aircraft in the world. About 200 aircraft are still flying in the late 2000s and nearly two generations of aerobatic champions made their classes with it.

In the late 70's the CAP 10 was developed to the single seater family of the CAP 20, 20L and 21. In the 1980s, a far derivative was the most successful family of the Cap 23x competition single seaters.

Mudry CAP-10B (N4238C) at the Old Warden Aerodrome. This aircraft initially operated with the Mexican Air Force with the registration number EPC-52, is currently operated by a private owner

C.A.A.R.P. C.P.100

Two prototype aircraft developed from the Piel Emeraude

CAP 10

Initial production aircraft. One built, which was fundamentally the third prototype.

CAP 10B

Later production aircraft with ventral fin and enlarged rudder

CAP 10C

Improved structure with carbon-fibre wing spar.

CAP 10C NG

Updated version of the CAP 10C in production since 2021.

CAP 10R

(R for _Remorqueur_-Tow Plane- ) Prototype of a glider tug version

CAP 10S

The French Navy ordered six copies of a special version, the CAP-10S, which entered service in 1980 with the SIV (Flight Initiation Section) in Fréjus-Saint-Raphaël, then equipped the 51S squadron in Rochefort-Sur-Mer. Today, they equip the EIP 50S at Lanvéoc-Poulmic and are used to assess and select naval aviation students.

CAP 10B/K

The exact same model as the CAP 10B modified through the implementation of a modification of the main wing spar approved under "MAJOR REPAIR DESIGN APPROVAL 10045153" by the EASA. This modification has been developed by the French Company Air-Menuiserie in 2013 and allows the CAP 10B/K to recover its flight envelope limitations (Maximum G-Force: +6.5G -4.5G).

France

Morocco

Used to equip Equipe Voltige aerobatic display team.[3]

Mexico

The Mexican Air Force bought 20, delivered in 1982, used till 1998[2]

South Korea

Australia

3 operated by BAE Training Systems in Tamworth as part of the flight screening process on behalf of the Royal Australian Air Force, Royal Australian Navy and the Australian Army.

More than 200 were built, mostly for aero-clubs all around the world. A huge number of European champions have started aerobatics on a Cap 10.

Specifications (CAP 10B)

[edit]

Data from Jane's All The World's Aircraft 1988-89 [2]

General characteristics

Performance

Aircraft of comparable role, configuration, and era

  1. ^ Roy 2012.
  2. ^ a b c d Taylor 1988, pp. 78–79
  3. ^ Air International November 1985, p. 251