[pulseaudio-discuss] [ANNOUNCE] PulseAudio 4.0 (original) (raw)

Arun Raghavan arun.raghavan at collabora.co.uk
Mon Jun 3 12:07:11 PDT 2013

Hello folks, We're back, with another exciting episode of PulseAudio Releases!

There's just a minor OS X fix since 3.99.2, and a NEWS file to make the tarballs more user-friendly. From 3.0, notable changes include:

Tanu's written a much more detailed and excellent summary of the changes at:

http://www.freedesktop.org/wiki/Software/PulseAudio/Notes/4.0

Tarball, as usual, is at:

http://freedesktop.org/software/pulseaudio/releases/pulseaudio-4.0.tar.xz MD5: 591f211db2790a7e4d222f2dc6858db3 SHA1: 9f0769dcb25318ba3faaa453fd2ed0c509fa9c5c

We continue to see a steady influx of patches from old and new contributors, and big thanks go out to all of you! Special shout-out to Mikel Astiz for his patient work on the Bluetooth modules.

Shortlog follows as usual, but the detailed change log linked above is even better!

Cheers, Arun

git shortlog v3.0..v4.0

Akihiro Tsukada (2): add support for MPEG-2 AAC pass-through Bump the native protocol version

Albert Zeyer (1): semaphore-osx: posix implementation based on named semaphores

Arun Raghavan (18): tests: Minor alsa-time-test improvments core: Fix up some debug logging stream: Make it easier to enable debug output alsa: Minor debug log addition protocol-native: Fix some debug output resample: Switch to speex-float-1 by default pulsecore: Don't conditionally inline pa_run_from_build_tree() alsa: Fix mixer path when running from build tree build-sys: Bump sonames equalizer: Fix compiler warning due use of 'signal' rygel: Set DLNA profile on our MediaItems daemon: Fix dlsearchpath while running from build tree pulsecore: Make run-from-build not readlink() on every call build-sys: json-c changed everything :( sink-input,source-output: Deal with FIX* flags and extended API build-sys: Bump soname Add a NEWS file build-sys: Bump soname

Christoph Gysin (1): doc: Generate API documentation for ext-device-manager and ext-device-restore.

David Henningsson (39): alsa-mixer: Fix the analog-output-speaker-always path pactl: Document @DEFAULT_SINK@, @DEFAULT_SOURCE@ and @DEFAULT_MONITOR@ alsa-sink/source: Better thread names alsa-ucm: Fallback to stereo duplex module: Unload modules in reverse order alsa-util: Add a function to read ELD info alsa-mixer: Add possibility to configure ELD device alsa-card: Make ELD monitor name a port property default.pa: Load module-jackdbus-detect with channels=2 by default bluetooth: Never allow microphone output ports core, alsa: Better drain reporting tests: Move ipacl-tests to TESTS_norun sink-input: Make sure the process_underrun callback is cleared alsa-mixer: Add path for Headset Microphone alsa-mixer: Support more phantom jacks tests: Add tests for alsa-mixer paths protocol-native: Ensure tlength is not set higher than maxlength protocol-native: Lower default minreq in low-latency scenarios client API: Document buffer_attr.maxlength alsa-mixer: It's valid to have zero elements in a path alsa-mixer: Add "Headset Playback|Capture" element pstream: Rename "do_something" function socket-server: Make the new channel low-delay, not the listening one pstream: Optimise write of smaller packages alsa-mixer: Add more jack detection for Headset mic path alsa-mixer: Change profile-sets directory to PA_SRCDIR alsa: Initialize ports before sinks/sources module-switch-on-port-available: Handle hotplugged cards default.pa: Load switch-on-port-available before udev-detect alsa: Fix ELD access warning on shutdown alsa-mixer: Allow input fallback port for devices with no gain control alsa-mixer: Switch to Headphone when Headphone mic jack is plugged in po: Fix error in hungarian translation alsa: Fix crash when profile_set == NULL alsa-mixer: Add "Line Out Jack" to analog-output.conf sink-input/source-output: Don't set save_volume if volume is not writable core-util: Add pa_safe_streq module-device-manager: Fix description restore rtp: Reset timestamp with correct size if not found

Flavio Ceolin (3): sink-input: New volume_factor system modargs: Adding pa_modargs_get_value_volume() role-ducking: Apply a ducking effect based on streams roles

Jarkko Suontausta (1): core: Assert on memchunk divisibility by sample spec in pa_memblockq_push().

Javier Jardón (1): build-sys: Use AM_CPPFLAGS instead of AM_CFLAGS for preprocessor arguments

João Paulo Rechi Vita (1): alsa-source: Fix log message

Jyri Sarha (1): combine: Stop rate adjustments if sink is supended

Luiz Augusto von Dentz (1): bluetooth: Add support for transport created by external profile

Maarten Lankhorst (1): alsa: skip eld initialization if hctl_handle is NULL

Marc-Antoine Perennou (1): port to gtk+-3.0

Martin Pitt (1): console-kit, systemd-login: Check for logind, not for systemd

Matěj Laitl (1): qpaeq: Try to load equalizer module before failing, better error messages

Mikel Astiz (66): dbus: Support dynamically created card profiles dbus: Add signal org.PulseAudio.Core1.Card.NewProfile bluetooth: Handle UUIDs announced later bluetooth: Fix condition to load module bluetooth: Make pa_bluetooth_transport_parse_property() private bluetooth: Remove unused pa_bluetooth_discovery_get_transport() bluetooth: Add device pointer to transport bluetooth: Use round() to convert PA<->BT volumes bluetooth: Add transport hashmap to discovery bluetooth: Use transport array instead of hashmap for devices bluetooth: Remove pa_bluetooth_device_get_transport() bluetooth: Avoid PA_BLUETOOTH_DEVICE_HOOK_REMOVED bluetooth: Extend discovery to support multiple hooks bluetooth: Move device hooks into pa_bluetooth_hook_t bluetooth: Use array to store profile states bluetooth: Refactor parse_audio_property() to support more properties bluetooth: Add state to transport objects bluetooth: Add transport hooks into pa_bluetooth_hook_t bluetooth: Avoid PA_BLUETOOTH_TRANSPORT_HOOK_REMOVED bluetooth: Avoid PA_BLUETOOTH_TRANSPORT_HOOK_NREC_CHANGED bluetooth: Remove deprecated transport hooks bluetooth: Connect all hooks during module load/unload bluetooth: Abstract microphone gain in transport bluetooth: Abstract speaker gain in transport bluetooth: Use bluetooth-util for mic/speaker gain control bluetooth: Move profile_to_string() to bluetooth-util bluetooth: Refactor parsing of profile state changes bluetooth: Use transport state to update port availability bluetooth: Abstract transport access types inside bluetooth-util bluetooth: Trivially remove bt_transport_is_acquired() bluetooth: Refactor dependency to org.bluez.Audio bluetooth: Use transport state instead of profile states bluetooth: Remove D-Bus dependency in module-bluetooth-device bluetooth: Call setup_stream() manually bluetooth: Replace acquire param 'start' with 'optional' bluetooth: Fix incorrect error messages bluetooth: Fix minor style issues bluetooth: Check message signature for SetConfiguration bluetooth: Use stdbool for pa_bool_t bluetooth: Do not check profile states is device_audio_is_ready() bluetooth: Remove device_is_audio_ready() bluetooth: Simplify redundant error check bluetooth: Fix potential assertion failure if MTU changes bluetooth: Fix sending D-Bus reply before internal callback bluetooth: Fix potential assertion failure due to unaligned packet size bluetooth: Propagate to property parsers if it is initial value bluetooth: Detect changes in constant properties reserve: Move get_name_owner() to the public rd_device API reserve: Fix leaking NameLost signals after release+acquire bluetooth: Fix incorrect index check with PA_ELEMENTSOF bluetooth: Fix premature acquire attempts core: Internally deprecate pa_port_available_t to use pa_available_t card: Add card profile availability cli: Show card profile availability status bluetooth: Expose card profile availability bluetooth: Use profile availability to auto-switch profiles bluetooth: Merge all ports into "bluetooth-input" and "bluetooth-output" bluetooth: Fix possible adapter duplicates bluetooth: Fix assertion failure if BlueZ crashes during GetProperties card: Set initial profile availability state bluetooth: Use enum to represent form factors bluetooth: Add specific form factor for phones bluetooth: Use form factor to set port name and description Revert "card: Support adding ports dynamically" bluetooth: Create ports before card profiles bluetooth: Fix missing port->profile association

Paul Meng (1): pulse: Add pa_operation_set_state_callback() API

Peter Meerwald (45): tests: Fix allowed sample formats in resampler-test usage text echo-cancel: Fix error cleanup of pa_speex_ec_init() tests: Fix conversion typo in cpu-test tests: Fix potential out-of-bound access violation in svolume cpu-test remap_sse: More specific logging: SSE -> SSE2 tests: Test both, SSE and SSE2, sconv in cpu-test tests: Add remap test code to cpu-test sconv: Check for SSE flag before initializing code tests: Fix sconv sample correctness in cpu-test resampler: Drop redundant assignment in convert_from_work_format() resampler: Improve s16<-->s32 conversion, use s16 work format if input or output is s16 sconv: Change/fix conversion to/from float32 build-sys: ALSA use-case manager requires ALSA library >= 1.0.24 build-sys: Properly check for HAVE_DBUS in module-ladspa-sink echo-cancel: Add function pa_echo_canceller_blocksize_power2() echo-cancel: Output echo canceller name if invalid echo-cancel: Fix memory leak / deinitialization of Adrian AEC echo-cancel: Fix zeroing of w in AEC_leaky() echo-cancel: Use proper float constants in adrian-aec resampler: Resample first followed by remapping if have more out channels than in channels tests: Volume-test seems to be long-running, set timeout core: Move pa_mix() into new file mix.c sample-util: Remove duplicate stdio.h #include mix: Use table for calc_stream_columes() mix: Split pa_mix() code using function table mix: Export function to get/set mixing implementation for a sample format mix: Combine loops over streams in pa_mix() core: Refactor code to multiply s16 by volume tests: Add mult-s16 test mix: Add special cases for mixing streams in s16ne format mix: Change end pointer to length parameter in mixing function mix: Add optimized mix code path for ARM NEON tests: Add NEON mix test cases to cpu-test tests: add test/performance comparison for mixing special-case code remap: fix check when to apply specialized code path doc: Fix suggested dl-search-path in README doc: Mostly fixing up i.e. versus i.e.\ in doxygen documentation doc: Some more nitpicking in pulse/def.h doxygen documentation doc: Document PULSE_COOKIE in pulseaudio.1 doc: Explain PULSE_SERVER string in pulseaudio.1 pstream: Fix case in log message doc: Mention just one CLI language in default.pa.5 doc: Fix description how boolean values can be specified doc: Reword description of meta commands in pulse-cli-syntax.5 echo-cancel: Fix send/recv_counter in calc_diff()

Peter Nelson (1): jackdbus-detect: Add channel count override.

Piotr Drąg (3): i18n: Update Polish translation i18n: Update Polish translation i18n: Update Polish translation

Robin H. Johnson (3): rtp: Cleanup variable naming. rtp: rename modarg destination to destination_ip rtp: Introduce source IP configuration

Stefan Huber (19): echo-cancel: Fix apply_diff_time() to use correct sample spec echo-cancel: Fix null implementation to setup one channel echo-cancel: Fix echo-cancel-test's argument number checking echo-cancel: Fix missing setup of sink_ss in echo-cancel-test. echo-cancel: Fix calc_diff for asymmetric sample specs echo-cancel: Enable different blocksizes for sink and source echo-cancel: Extend null implementation to arbitary sample specs resampler: Replace pa_bool_t by bool resampler: Refactor calc_map_table() resampler: Generate normalized rows in calc_map_table() echo-cancel-test: Enable debug log level echo-cancel-test: Pass aec_args with module args echo-cancel-test: When fopen() fails tell which file failed echo-cancel: Do not bypass EC implementation when play stream is empty echo-cancel: Enable different sample specs for rec and out stream modules: add module-remap-source virtual-source: remove redundant checks and callbacks modules: remove obsolete comment on PA_SOURCE_OUTPUT_DONT_INHIBIT_AUTO_SUSPEND modules: Remove obsolete may_move_to callbacks

Tanu Kaskinen (86): mainloop: Remove redundant wakeup_pipe validity checks. mainloop: Check pa_write() return value. esound: Suspend/resume also sources on STANDBY/RESUME commands. Log the reason for every suspend/resume. card-restore: Log the restored profile name. bluetooth: Check if BlueZ tries to set the configuration twice for the same transport. bluetooth: Remove prefixing from static functions. core-util: Improve get_path() documentation man: Document the possiblity of unloading modules by name in pulse-cli-syntax. bluetooth: Improve transport state change log message. bluetooth: Make pa_bt_audio_state_from_string() private. bluetooth: Don't free read_smoother in pa__done(). pasuspender: Check pa_context_connect() return value. Fix pa_parse_boolean() return value checking. smoother-test: Fix array overflow. mainloop-signal: Explicitly ignore pa_write() return value. oss: Check pa_read() return value. cpulimit: Explicitly ignore pa_read() return value. device-restore: Fix empty argument list declaration. memblockq: Use pa_xnew0() to avoid manual zeroing. modargs: Don't fail needlessly in pa_modargs_get_sample_spec_and_channel_map(). man: Update log-target documentation. bluetooth: Don't access a transport after it's freed. build: Don't enable BlueZ if libbluetooth is not found. bluetooth: Remove pa_bluetooth_discovery_sync(). shm: Support Solaris shm file paths. solaris: Fix get_playback_buffered_bytes() return value. solaris: When suspending, flush the device instead of draining it. pulse: Fix endianness definition on Sparc. bluetooth: Convert booleans to stdbool. pulse: Initialize pa_operation objects to all-zero. Call change_cb() only when there's an actual change. Initialize monitor's busy status to false if we own the device. jack: Don't fail module-jackdbus-detect loading if the channels argument is not given. device-port: Return early from pa_device_port_set_latency_offset() if the offset doesn't change. card: Remove some unnecessary checks. build-sys: Bump D-Bus dependency version to 1.4.12. build-sys: Fix an outdated D-Bus version in an error message. ladspa: Fix a couple of minor memory leaks. .gitignore: Add pulse-daemon.log. build-sys: Install the bash completion script. build-sys: Use dist_vapi_DATA instead of listing the files in EXTRA_DIST. bluetooth: Fail if BlueZ tries to give duplicate device addresses. tests: Fix function argument wrapping style in cpu-test.c. simple: Handle holes in recording streams. padsp: Handle holes in recording streams. pacat: Handle holes in recording streams. dbus: Fix connection cleanup when killing clients dbus: Fix cleanup when removing signal listeners udev: Add use_ucm module argument build-sys: Add check-daemon target to the top-level Makefile.am. tests: Indicate failure in test-daemon.sh by returning 1 if any test fails. daemon: Don't rely on prctl(PR_SET_KEEPCAPS, 0) for dropping caps. echo-cancel: Fix tap weights array alignment echo-cancel: Fix uninitialized variable dotp_xf_xf of AEC struct gconf: Add userdata pointer to struct module_info gconf: Remove needless userdata function arguments hashmap: Use pa_free_cb_t instead of pa_free2_cb_t device-port: Remove pa_device_port_hashmap_free() idxset: Use pa_free_cb_t instead of pa_free2_cb_t hashmap: Add pa_hashmap_remove_all() idxset: Add pa_idxset_remove_all() bluetooth: Fix thread teardown code ordering format: Add #defines for enum values module: Don't use lt_dlerror(), it's useless ltdl-bind-now: Log an error in case of failures man: Remove reference to the .verbose CLI command udev: Add tsched_buffer_size module argument ladspa: Use volume sharing. pulse: Document the operation state behavior on context disconnection. alsa: Add configuration for NI Traktor Audio 2 pacat: Fix mode detection for parecord loopback: Fix segfault in may_move_to() callbacks filter-apply: Fix segfault with moving streams loopback: Flush asyncmsgq from the right context conf-parser: Remove redundant feof() call Revert "conf-parser: Remove redundant feof() call" .gitignore: Add alsa-mixer-path-test sink: Fix flag name typo mix: Mix the right number of streams shm: Don't force the shm files to be read-only sink, source: Propagate flag changes to filters sink, source: Really set the fixed latency in set_fixed_latency_within_thread(), always. sink, source: Send notifications when flags change alsa-mixer: Don't use the mono path in the analog-stereo mapping. map-file: Remove pa_format_info_free2

Vadim Troshchinskiy (1): osx: Fix latency querying

Wang Xingchao (1): sndfile-util: reduce useless loop

Yuri Chornoivan (2): Update Ukrainian translation. Fix various typos in messages and comments

poljar (Damir Jelić) (14): device-port: Add a card pointer to the ports. device-port: Access the cards directly. device-port: Cleanup of the sink/source subscription events. device-port: Fire a hook when the latency offset changes. card-restore: Only use hooks for the events. pactl: Add the ability to toggle mute state. build: Add zsh completion build: Add bash completion bash-completion: Don't complete devices in the list commands pactl: Add a command for setting the default sink/source. zsh-completion: Add support for remote servers. zsh-completion: Add support for the new pactl commands. zsh-completion: Fix pacat completion. systemd-login: Remove unused variable session.

Ștefan Săftescu (1): virtual-sink: Removed the option to specify sample format.

More information about the pulseaudio-discuss mailing list