Link Shell Extension (original) (raw)

Link Shell Extension

Last Updated December 18 2022, Version 3.9.3.5

Privacy Statement

The privacy statement can be found here

Quick Start

Download
Documentation
Frequently asked questions (FAQ)
Blog
History
Donations

French

German

Introduction

The NTFS file system supports a facility known as hard links (referred to herein as Hardlinks). Hardlinks provide the ability to keep a single copy of a file yet have it appear in multiple folders (directories). They can be created with the POSIX command ln included in the Windows Resource Kit, the fsutil command utility included in Windows or my command lineln.exe utility. Thus, using standard Windows facilities Hardlinks can only be created at the command prompt, which can be tedious, especially when Hardlinks to multiple files are required or when one only makes occasional use of Hardlinks.

Support for Junctions in standard Microsoft software offerings is even more limited than that offered for hardlinks.
Recently Winfile.exe was github-reborn by Microsoft, and I spent quite some time to make it hardlink and symbolic link aware. For easy tasks you might try Winfile

Link Shell Extension (LSE) provides for the creation ofHardlinks, Junctions,Volume Mountpoints, and Symbolic Links, (herein referred to collectively as Links) a folder cloning process that utilises Hardlinks or Symbolic Links and a copy process taking care of Junctions, Symbolic Links, and Hardlinks. LSE, as its name implies is implemented as a Shell extension and is accessed from Windows Explorer, or similar file/folder managers.
The extension allows the user to select one or many files or folders, then using the mouse, complete the creation of the required Links - Hardlinks, Junctions or Symbolic Links or in the case of folders to create Clones consisting of Hard or Symbolic Links. LSE is supported on all Windows versions that support NTFS, Windows7/8/10. Hardlinks, Junctions and Symbolic Links are NOT supported on FAT file systems, and nor is the Cloning and Smart Copy process supported on FAT file systems.

Within this document the terms action button and action (pop up) menu are used to refer what are often referred to as the right mouse button and the pop up menu that is displayed when that mouse button is pressed (often referred to as the context menu). Recognising that people swap the usage of their mouse buttons, Microsoft refer to the primary and secondary mouse buttons. We prefer to refer the mouse buttons as theSelect button and the Action button; and rather than terms such as Context Menu, Shell Menu, Right Mouse Menu we use the term Action menu.

Installation

The current user must have administrator privileges in order to install the software.

LSE is installed by executing the install program(HardLinkShellExt_$(platform).exe). Follow the instructions issued by the program, there are no mandatory inputs required during installation. It is possible to change the location into which LSE is installed, the default is

C:\Program Files\LinkShellExtension

Smartscreen pop-up
With Windows 10 the SmartScreen facility of Windows Defender might pop up and warn you:

Windows protected your PC Windows Defender SmartScreen prevented an unrecognized app from starting. Running this app might put your PC at risk.

Please choose 'Install Anyway'. LSE is signed with a Standard Code Signing Certificate, but not with anEV Code Signing certificate, which would prevent Smartscreen from interferring.

Explorer Restart
During installation Explorer.exe has to be restarted to make Link Shell Extension active. This means that all pending operations with explorer.exe are interrupted but with the interactive install you can decide to postpone the explorer.exe restart. A dialog box will give you the choices during installation.

Installation Arguments

Some command line switches can be passed during install, so that a silent install via .bat file can be acchieved.

Silent install
/S pops up no prompts during install. If the /S switch is used, explorer.exe will be restarted after installation, to make Link Shell Extension active immediately.

Specify Language
/LANGUAGE passes the language in which LSE shows up. e.g.

HardLinkShellExt_$(platform).exe /S /Language=English Currently English, Chinese, Czech, French, German, Greek, Italian, Japanese, Korean, Polish, Portuguese, Russian, Slovak, Spanish, Swedish, Turkish and Ukrainian are available as valid parameters for the /Language switch.

Specify Directory
When using the silent install a directory can also be specified with the /D switch e.g.

HardLinkShellExt_$(platform).exe /S /Language=English /D=C:\Program Files\LSE

Uninstall
Link Shell Extension can also be uninstalled silently by issuing

$LSEInstallDir/uninst-HardLinkShellExt_$(platform).exe /S

If the /S switch is used during uninstall, explorer.exe will be restarted after uninstallation, to make Link Shell Extension inactive immediately.

No Check for VcRedist
On some Windows10 machines, there is no need to install the vcredist, or worse: VcRedist can not be installed, but is somehow already on the system. To overcome this the /noredist switch can be passed via command line. e.g.:

HardLinkShellExt_$(platform).exe /noredist

Chocolatey Installation

Link ShellExtension can also be installed via chocolatey by issuing

choco install linkshellextension

from a command prompt. Make sure you have chocolatey installed. The current user must have administrator privileges in order to install the software via choco

Winget Installation

LSE can also be installed via winget by issuing

winget install HermannSchinagl.LinkShellExtension

from a command prompt. Make sure you have winget installed.

Using Link Shell Extension

Pick Link Source causes the selected files to be "stored" as the source for the Hardlinks that you want to create.

Pick Link Source

To create the Hardlinks a destination folder must be chosen, by clicking the mouse action button on the destination folder a menu will pop up, which will include the entry - Drop HardLink

Drop Hardlink

Choosing Drop HardLink will create the hardlinks in the selected destination folder.

Overlay Icons for Hardlinks
To help distinguish hardlinks folders from normal files, an overlay icon is implemented on hardlinks that shows a red arrow icon under the folder.

Overlay Icon for Symbolic Links

Overlay icons for Hardlinks can also be customized.

Cancel current Pick Link operation

When doing an Action button click in the destination folder background, in addition to the Drop HardLink option there is the possibility to Cancel Link Creation entry.

Cancel the current pick operation

Popup Submenu

Since LSE supports Junction,Clones and Symbolic Links, when one or more folders are selected as the Source, they can be dropped in several ways.

To avoid crowding the popup menu, a submenu is provided that contains the different types of Links applicable to folders.

Popup Submenu

Drag and Drop Support

Creating Hardlinks via drag and drop is supported, after selecting one or more files you can drag them to the destination folder with the Action button held down; when it is released choose HardLink Here from the action menu to create the Hardlinks of the selected files in the destination folder.

Drag Hardlinks

Auto Rename

Files can be hard linked to the same folder as the source folder. Because two directory entries cannot have the same name, LSE uses '$filename - Hardlink.$ext' as the name of the the new link.

Automatic rename

LSE uses the same hydraulics as explorer when it comes to multiple '$filename - Hardlink': It uses numbers to enumerate the multiple hardlinks of one file in the same directory, e.g.$filename - Hardlink (2).$ext.

The Auto Rename mechanism is also used when Junctions, Hardlink Clones, Symbolic Links, Symbolic Link Clones, Mountpoints or Smart Copies are created in the same directory.

autorenamemultpiple.png

Junction Support

Junctions provide for the creation of linkages among directories.

Pick a directory as source for Junction

Junctions are created in the same way as Hardlinks, except that the Source Link is a folder rather than a file. Select a folder, click the right mouse button, choosePick Link Source from the action menu, navigate to the destination folder, click the action button, open the submenu Drop As ... and select Junction:

Drop as Junction

Junctions are marked with a small piece of chain below the folder icon.

Drop as Junction

Junctions can also be created via Drag and Drop when the selected folders are dragged with the action button pressed to a destination folder; when the right mouse button is released, select theDrop Here ... submenu and then Junction.

Create a junction by dragging

Overlay Icons for Junctions
To help distinguish junction folders from normal folders, an overlay icon is implemented on junctions that shows a small three link chain icon under the folder.

Overlay Icon for Junctions

Overlay icons for junctions can also be customized.

Junctions can span network drives as long as the target is a mapped network drive. Unfortunately Junctions, which have a UNC Path as target, can be created with LSE, but even Windows7/8/10 seems to contain a bug, which prevents it from dereferencing a UNC Path in a junction, even if LSE correctly sets up the reparse info for UNC junctions. When a UNC target junction is double clicked in explorer the error ERROR_INVALID_REPARSE_DATA(4392), will show up and tell you that the info in the reparse point is illegal, even if it is not.

Elevation is needed in e.g. c:\Program Files for junctions beeing created in. This is why the famous UAC dialog must be acknowledged.
To be exact: Only the creation of directories needs elevation in such situations, but creating an empty directory is a vital part of creating a junction. The DeviceIoControl(), which does the real work in creating junctions would work without elevation.

Replacement Junction Symbolic Link Mountpoint

Link Shell Extension can change the target of an existing Junction, Symbolic Link or MountPoint either via Pick/Drop or Drag and Drop.

To use this feature simply select an existing directory as Link Source and drop it over an already existing Junction/Symbolic Link/Mountpoint. By selecting the 'Drop as ... Replacement Junction/Symbolic Link/MountPoint' from the action menu, the target of an already existing Junction/Symbolic Link/MountPoint is replaced by the newly picked target.

Drop a junction for replacement

The same can be achieved via Drag an Drop for Symbolic Link Directories, Junctions and Mount Points, but not for Symbolic Link Files. Symbolic Link Files have to be repaired by the 'Pick Link Source', 'Drop as ... Replacement Symbolic Link' repair alternative.

When the backup mode is selected the ACLs of the Junction/Symbolic Link/MountPoint are preserved.

Copy Junction Symbolic Link Mountpoint

Link Shell Extension can copy an existing Junction, Symbolic Link or MountPoint either via Pick/Drop or Drag and Drop.

copy a reparse point

To use this feature simply select an existing Junction, Symbolic Link or MountPoint as Link Source and drop it over an already existing directory. By selecting the 'Drop as ... Junction/Symbolic Link/MountPoint Copy' from the action menu, the Junction/Symbolic Link/MountPoint is copied to the target and the relation is adjusted

Drop a junction for replacement

The same can be achieved via Drag an Drop for Symbolic Link Directories, Junctions and Mount Points.

When the backup mode is selected the ACLs of the Junction/Symbolic Link/MountPoint are preserved.

Smart Copy

Smart Copy creates a copy of the directory structure from the source location to the destination, but it preserves the inner hardlink structure and inner junction/symbolic link relations of the source, and recreates this inner hardlink structure and inner junction/symbolic link relation at the destination location:

With hardlinks it behaves as follows:

Smart Copy How To

By closely looking at the above picture one can find three different types of files:

Normal Files The file B is a normal file. It gets copied as any other copy tool would do.
Saturated Hardlinks The files E and F are hardlinked together. In LSE terms they are called Saturated Hardlinks, because the reference count, which is here 2, matches the number of occurrences below 'Folder 1', which is here 2. In General: A hardlink is called Saturated with respect to a folder F, if the number of occurrences below the folder F matches the reference count. Saturated Hardlinks can be copied completely via Smart Copy.
Unsaturated Hardlinks The File A, C, D are hardlinked together. In LSE terms they are called Unsaturated Hardlinks, because the reference count, which is here 3, does not match the number of occurrences below 'Folder 1', which is here 2. Only C and D are below Folder 1. In General: A hardlink is called Unsaturated with respect to a folder F, if the number of occurrences below the folder F is smaller than the reference count. Unsaturated Hardlinks can only be partially copied by Smart Copy. In the above example C and D are hardlinked together in the destination location, but the hardlink to A is broken. This means that the reference count of C and D is 2 with the destination location.

With junctions or symbolic link directories the default behaviour during smartcopy is as follows:

Behaviour for inner junctions

By closely looking at the above picture one can find three different types of folders/junctions:

Normal Folders The folder 'Folder 3' is a normal folder. It gets copied with its content as any other copy tool would do.
Inner JunctionsSymlinks The folder 'Inner Junction/Symlink' is targeted at 'Inner Junction/Symlink Target'. In LSE terms this kind of folder is called Inner Junction/Symlink, because its target points to a folder, which is below the common anchor 'Folder 1'. Inner Junctions/Symlink are restored properly via Smart Copy in the destination location.
Outer JunctionsSymlinks The folder 'Outer Junction/Symlink' is targeted at the folder 'Outer Junction/Symlink Target'. In LSE terms this kind of folder is called Outer Junction/Symlink, because its target points to a folder, which is in parallel and thus outside the anchor 'Folder 1'. Outer Junctions/Symlink can be handled in three different ways. Please see the section on Outer Junction/Symlink Handling.

Windows7/8/10 support Symbolic Links, which behave as follows during Smart Copy:

Behaviour for inner symbolic links

By closely looking at the above picture one can find three different types of files/symbolic links:

Normal Files The file A is a normal file. It gets copied as any other copy tool would do.
Inner SymbolicLinks The symbolic link 'Inner Symlink' is targeted at 'Inner Symlink Target'. In LSE terms this kind of symbolic link is called Inner Symlink, because its target points to a file, which is below the common anchor 'Folder 1'. Inner Symlink are restored properly via Smart Copy at the destination location.
Outer SymbolicLinks The symlink 'Outer Symlink' is targeted at the folder 'Outer Symlink Target'. In LSE terms this kind of symbolic link is called_Outer Symlink_, because its target points to a file, which is in parallel and thus outside the anchor 'Folder 1'. Outer Symlink are handled by Smart Copy depending on the Outer Junction/Symbolic Link handling.

Smart Copies are created in the same way as Junctions, select a folder, click the Action button, choose Pick Link Source from the action menu...

Pick Source for Smart Copy

...navigate to the destination folder, press the action button, open the Drop As ... submenu and select Smart Copy:

Drop Smart Copy

Smart Copy is a must if e.g.. the whole content of a hard disk, which has lots of hardlinks/junctions/symbolic links, should be copied to another hard disk. During the Smart Copy operation empty folders get copied too and the date/time stamps of folders/junctions/symbolic links are also restored at the corresponding destination locations.

Because Smart Copy creates inner hardlinks/junctions/symbolic links, this feature is only available on NTFS volumes.

If Smart Copy takes longer than 250msec a progressbar shows the status of the smart copy operation.

Smart Copy also processes all available alternative NTFS streams of a file.

If items are already available in the destination, Smart Copy only copies when the Files/Symbolic/Junctions/MountPoints are newer than the already existing items.

When restoring Symbolic links LSE forks its helper LSEUacHelper.exe to forwards this operation to it, because the creation of symbolic links needs elevation, and thus brings up the famous UAC dialog.

LSE only issues its helper LSEUacHelper.exe if a symlink is among/below the selected folders, so it saves you from one UAC prompt if you don't have symlinks among your selection.

Smart Copy by default creates relative symbolic links during the Smart Copy operation.

Command LineThe Smart Copy functionality is also available via command line fromn.exe via the --copy command line switch.

Crop/Unroll/Splice Outer Junctions/ Symbolic Links

During SmartCopy, Smart Mirror, Delorean Copy and Clone so called Outer Junctions/Symlink directories may need processing. There are 3 different ways to deal with those Outer Junctions/Symlink directories:

Crop Crop breaks links to Outer Junctions/Symlink directories in the destination. Crop also applies to Outer Symlink Files. Cropping outer Junctions In the above example Folder1 is copied to Destination/Folder1, but_Outer Junction/Symlink_ is not available in the destination, because Folder1/Outer Junction/Symlink pointed to Folder0/Outer Junction/Symlink Target, which is not below Folder1. The objective behind cropping Outer Junctions/Symlink Directories is to get a pure copy during Smart Copy, Smart Mirror, Delorean Copy and Clone without connections to the source. Enabling Crop for Outer Junction/Symbolic Links Crop can be selected via the configuration tool.
Unroll Unroll follows Outer Junctions/Symlink Directories and rebuilds the content of Outer Junctions/Symlink Directories inside the hierarchy at the destination location. Unroll also applies to Outer Symlink Files, which means, that unroll causes the target of Outer Symlink Files to be copied to the destination location. Unroll Outer Junctions In the above example Folder1 is copied to Destination/Folder1, and_Outer Junction/Symlink_ and all the files/directories below_Outer Junction/Symlink Target_ are copied to the folder Outer Junction/Symlink in the destination. The objective behind unrolling Outer Junctions/Symlink Directories is to get everything with which the source is connected and rebuild it as seperate copy in the destination. It resembles the 'hair of the elephant' pattern: Pull on a hair of an elephant, and get the whole elephant. Unroll is the default behaviour for Smart Copy, Smart Mirror, Delorean Copy and Clone. Advanced thoughts on Unrolling The picture above was just the simplest case, because Unroll does much more when it encounters complex situations. Think of an outer junctions/symbolic links, which itself contains junctions/symbolic links, which are inner with respect to the first outer junction symbolic link: Unroll Inner Outer Junctions In the above example Folder1 is copied to Destination/Folder1, and_Outer Junction/Symlink_ and is unrolled as expected, but since Junction/Symlink is an inner junction with respect to Outer Junction/Symlink Target, the junction/symlink relation is restored in the destination. This kind of nesting can be much more complex: Unroll Inner Outer Junctions In the above example Folder1 is copied to Destination/Folder1, and_Outer Junction/Symlink_ and is unrolled as expected, but then it starts to get fascinating, because we have two levels of outer junctions/symlinks which all have respective inner junctions/symlinks, and which are restored properly. Once you digged yourself through the above picture, you got it. It is not simple I know, but it is necessary to properly unroll. And complexity increases if symbolic link files are within unrolled outer junctions/symbolic links: Unroll Inner Outer Junctions In the above example Folder1 is copied to Destination/Folder1, and_Outer Junction/Symlink_ and is unrolled as expected, but it contains Inner Outer Symlink which points to Inner Outer Symlink Target and this is an inner junction/symbolic link with respect to Outer Junction/Symlink Target But worth mentioning is the Symbolic Link Outer Symlink, which would be a definitive outer symbolic link, but since its targets parent-directory Outer Junction/Symlink Target is unrolled,Outer Symlink becomes an inner symbolic link with respect to Folder1. File1 Symlink is also an outer symbolic link, but its target parent-directory_Folder2_ is not that lucky to get unrolled, so in the destination File1 Symlink is not a symbolic link any more, but a copy of the symbolic links' target. Nested Reparse Points are also an interesting use case, which the algorithm has to tackle with: Nested Reparse Points In the above example Folder1 is copied to Destination, and_Junction/Symlink F0_ and is unrolled as expected, but it contains inner nested reparse points. Nested means Reparse Points pointing to Reparse Points The Unroll functionality also opens up the possibility to have circular Junction/Symbolic Link relations among a set of copied items: Unroll Junctions Circularities In the above example Folder1 is copied via the --unroll option to Destination/Folder1. Smart Copy/Smart Mirror and Delorean Copy operations can deal with the above shown circularities and break circularities by not following the affected Junction/Symbolic Link. Junctions/Symbolic Links can also point to FAT drives or other NTFS drives requiring as a prerequisite unique Disk-IDs on all disks, which are chained together via Junctions/Symbolic links: Unroll Junctions Unique DiskID Hardlink siblings are found by matching the per NTFS volume uniqe file-id, but if more volumes are chained together it might happen that the same file-ids can be found on two different NTFS volumes. To address this all operations use the disk-id and the file-id to match hardlink siblings. Furthermore it is not allowed to have the disk-id 0xffff-ffff, because the algorithms use this as internal indicator of a FAT drive. The Unroll option also allows to point multpile junctions to the same target location, which causes the algorithms to traverse the same items many times: Unroll Junctions Unique DiskID At the first glance multiple traversation of items looks simple, but for files this means that multiple traversed files are the same in the destination and are hardlinked together. So don't be confused when you see hardlinks, which have never ever been there before. Copying Junction/Symbolic Links from mapped network drives also needs extra care, because junctions on the remote machine relate with path references only valid on the remote machine to each other: Mapped Network Drive Reparsepoint Resolution The example in the above picture shows such a situation X:\Src\Foo\Junction/Symlink is a junction on a Remote Machine, which points to X:\Src\Foo\Folder. It is a valid Junction. X:\Src\Foo is sharded via \\RemoteMachine\MyShare, which still is no problem. \\RemoteMachine\MyShare mapped to T:\ on a local machine is fine, but the Junction T:\Junction/Symlink, if asked for its target, will still return X:\Src\Foo\Folder even on the Local Machine. One could expect that the target is T:\Folder, but it is not for Junctions. When SmartCopy/Mirror/Delorean comes across such a situation, it translates the Junction correctly when it is copied onto the Local Machines drive Y:\, so that the final Junction target points correctly to Y:\Dest\Bar\Folder
Splice Splice reconnects Outer Junctions/Symlink directories in the destination to their original targets. Splice outer Junctions In the above example Folder1 is copied to Destination/Folder1, and_Outer Junction/Symlink_ is available in the destination as junction, which points to the original location Outer Junction/Symlink Target. The objective behind splicing Outer Junctions/Symlink Directories to its original location is to get a copy during smartcopy, but to reuse Outer Junctions/Symlink Directories source locations. The Splice functionality is also useful, when mountpoints should be copied. Mountpoints are very similar to Junctions, but point to a path always starting with \\?\VolumeGuid{}. Copy Mountpoint with Splice Enabling Splice for Outer Junction/Symbolic Links Splice can be selected via the configuration tool.

Multiple Source

Multpiple Source Locations can be specified for SmartCopy, Clone, and Delorean Copy. If there are junctions/symlinks between these source locations, they are handled as inner junctions/symbolic links, because all source locations are dealt like a common root.

Multiple Sources

In the above example Location1 and Location2 are copied to Destination.Location2/Junction20 is treated as inner junctions to Location1/Folder10 in the source, and that's why Destination/Junction20 points to Destination/Folder10 in the Destination.

The objective behind this is to treat all junctions/symlinks as inner junctions/symlins as long as they are in the set of source folders.

With LinkShell Extension this works as follows:

Multiple source are selected

In the above example all content from Location 1 and Location 2 and pskill.exe are selected. Possible junctions/symbolic links in Location 1 pointing to Location 2 or vice versa are treated as inner junctions/symbolic links, because all selection is treated as a common root.

Smart Move

Smart Move enables folders with junctions and symbolic links beneath to be renamed. The junctions and symbolic links' targets are updated below that folder. Without Smart Move renaming of such folders would end in dead junctions and symbolic links.

With junctions or symbolic link directories it behaves as follows:

Smart Move behaviour for junctions and symbolic links

By closely looking at the above picture one can find three different types of folders/junctions:

Normal Folders The folder 'Folder 3' is a normal folder. It gets moved with its content straight forward.
Inner JunctionsSymlinks The folder 'Inner Junction/Symlink' is targeted at 'Inner Junction/Symlink Target'. In LSE terms this kind of folder is called Inner Junction/Symlink, because its target points to a folder, which is below the common anchor 'Folder 1'. Inner Junctions/Symlink are updated properly via Smart Move in the destination location.
Outer JunctionsSymlinks The folder 'Outer Junction/Symlink' is targeted at the folder 'Outer Junction/Symlink Target'. In LSE terms this kind of folder is called Outer Junction/Symlink, because its target points to a folder, which is in parallel and thus outside the anchor 'Folder 1'. Outer Junctions/Symlinks are not touched by Smart Move and thus stay connected to their respective target. Please note that this is different to Smart Copy, which has 3 different ways to deal with Outer Junctions/Symbolic Links.

The Smart Move functionality is integrated into Explorer seamlessly, so that you don't have to do anything special. Simply drag a folder in explorer to its destination location, or e.g. press F2 in Explorer to rename a directory and LSE will intercept this operation under the hood, takes care of junctions or symbolic links, and will update them.

Intercepting move and rename operation means, that LSE takes over control before rename/move, and recursivley searches the selected folder for junctions or symbolic links. But searching large amounts of files and folders takes time, so LSE will show a progress bar when searching takes longer than 250msec.

Progress bar during Smart Move

If symbolic links have to be updated LSE calls its UAC helper LSEUacHelper.exe.

If backup mode is enabled the UAC helper LSEUacHelper.exe is called anyway, because LSE needs to enumerate files in locations, where it might have no permissions.

Smart Move creates relative symbolic links during the Smart Move operation.

If a LocalizedResourceName is given via desktop.ini and the very folder is readonly, SmartMove will not work. This seems to be a bug in Shell Explorer ever since. ICopyHook::CopyCallback() is not called at all in this situation.

Enabling/Disabling Smart Move
Smart Move can be switched on/off via the configuration tool

Command Line The Smart Move functionality is also available via command line from ln.exe via the --move command line switch.

Clone

Clones are copies of a folder tree from a source location recreated at the destination location, however the files within the new folder tree are Hardlinks or Symbolic Links to the respective files in the source folder tree.

Hardlink Clones how to

A folder tree might also contain Junctions or Symbolic Links. The clone process recreates inner junction/symbolic links at the destination location very similar as Smart Copy does.

Hardlink Clones the smart way

Outer Junctions/Symbolic links are recreated with respect to the specifiedOuter Junction/Symbolic Link handling. e.g.

With Windows7/8/10 this cloning process is also available with Symbolic Links instead of Hardlinks.

Symbolic Link Clones the smart way

Clones are created in the same way as e.g Junctions. Select a folder, click the Action button, choose Pick Link Source from the action menu...

Pick Source for Hardlink Clone

...navigate to the destination folder, press the action button, open the Drop As ... submenu and select HardLink Clone:

Drop a Hardlink Clone

... choose Symbolic Link Clone to create clones of existing tree structures.

Drop a Symbolic Link Clone

HardLink and Symbolic Link Clones can also be created via Drag and Drop. Select a folder and drag with the action button depressed to a destination folder. When the action button is released open the Drop Here... submenu and select HardLink Clone or with Windows7/8/10 Symbolic Link Clone:

Drop Hardlink Clone.png

HardLink or Symbolic Link Clones are useful if you need to replicate a folder tree at a different location. The disk space required is minimal because the new structure consists entirely of NTFS directory entries with no real amount of actual data storage.

If both files and folders are selected as Source Links and dropped as aHardLink Clone then the selected files are dropped as Hardlinks alongside the HardLink Clones.

Because Clones use Hardlinks or Symbolic Links, they are only available within an NTFS volume. Hardlink Cloning can not replicate the folder structure from one disk volume to a different volume, because Hardlinks are limited to operation on a single volume. Symbolic Link Clones can be used to create volume spanning Clones.

When creating Clones, LSE forks its helper LSEUacHelper.exe to forwards this operation to it, if the folder tree contains symbolic links, because the creation of symbolic links needs elevation, and thus brings up thefamous UAC dialog.
LSE only issues its helper LSEUacHelper.exe if a symlink is among/below the selected folders, so it saves you from one UAC prompt if you don't have symlinks among your selection.

Limitations
Hardlink creation needs write access to the source hardlink sibling. This means Hardlink Clone will fail, and just generates an empty directory structure, if write access for the source files is not available. This is caused in the way Windows implements hardlinks, because the security information for a file and thus for all hardlink siblings is shared among all hardlink siblings.

Creating hardlink clones in such cases can be enabled, by granting write access for the source files to the user who will create a hardlink clone, or in a single user use-case to everyone.

Command Line The Clone functionality via Hardlinks or Symbolic Links is also available via command line from ln.exe via the --recursive command line switch.

Smart Mirror

Smart Mirror is very similar to Smart Copy and not only copies but synchronises the folder Source to Destination:

Smart Mirror is created in the same way as e.g Junctions. Select a folder, click the Action button, choose Pick Link Source from the action menu...

Pick Source for Hardlink Clone

...navigate to the destination folder, press the action button, open the Drop As ... submenu and select Smart Mirror:

Drop a Smartmirror

Smart Mirror is a little bit different with respect to Auto Rename, because it expects a already existing folder in the destination location, which has the same name as the source folder, so that it can do the mirror.

DeLorean Copy

DeLorean Copy is a way of creating incremental backups by using a combination of hardlink clone and Smart Copy.

The following picture gives an overview what DeLorean Copy is about

DeLorean Copy Behaviour

In general a DeLorean Copy has 3 principals: Source(t), InitialBackup and Backup(n).

Phase 1: Initial SmartCopy The folder Source(t) is initially copied to InitialBackup. This is shown by the blue arrow.
Changeshappen During this phase the files under source change, and_Source(t)_ becomes Source(t+1).
Phase 2: Hardlink Clone The folder InitialBackup is Hardlink Cloned to_Backup1,_ which ties InitialBackup and Backup1. This is shown by the red arrow.
Phase 3: Mirror Mirrors the folder Source to Backup1. This is shown by the green arrow: Keeps unchanged files as hardllinks to InitialBackup. Deletes files not anymore in Source(t+1) from Backup1. Copies different files from Source(t+1) to Backup1.

With completion of this first round Backup1 contains the first lean and mean copy of Source only consisting of either hardlinks to InitialBackup, or of copied files if there was the need to copy them over from Source(t+1) because they were newer under Source(t+1).
The point is that all files in Backup1 are transparently accessible, but really little space is used, because not all files in the Source(t+1) changed, so that there was only the need to effectively copy over a few files from Source(t+1) to Backup1.
This can be repeated on and on. The second round would be using Source, Backup1 and Backup2 for DeLorean Copy:

Changeshappen During this phase the files under source change, and_Source(t+1)_ becomes Source(t+2).
Phase 2: Hardlink Clone The folder Backup1 is Hardlink Cloned to Backup2, which ties Backup1 and Backup2. This is shown by the red arrow.
Phase 3: Mirror Mirrors the folder Source(t+2) to Backup2. This is shown by the green arrow: Keeps unchanged files as hardllinks to Backup1. Deletes files not anymore in Source(t+2) from Backup2. Copie newer files from Source(t+2) to Backup2.

DeLorean Copies are created in the same way as e.g Junctions. Select a folder, click the Action button, choose Pick Link Source from the action menu...

Pick a directory for DeLorean Copy

...navigate to the destination folder, press the action button, open the Drop As... submenu and select DeLorean Copy:

Pick a directory for DeLorean Copy

If a DeLorean Copy was dropped the first time onto a directory, the operations, which are described under phase 1 in the above descriptions, namely a Smart Copy, is performed. Link Shell Extension automatically generated the folder name for the destination by appending a timestamp.

Any successive drop of a directory onto the a destination directory initates Phase 2 and Phase 3 from the above description, namley it does the Hardlink Clone from the former backup onto the current backup and furthermore does mirror the source onto the current backup.

A directory holding many copies may look like this.

Directory with many DeLorean Copies

Limitations
It is little known, but NTFS has a limit to create a maximum of 1023 hardlinks to one file. For DeLorean Copy this means that it will display an error message if this limit is exceeded, because exceeding this limit means loss of data among the most recent backup sets:

Delorean Exceed 1023 Hardlink Limit

The reason for exceeding this limit could either be, that there have been more than 1023 backup sets but no hardlinks within the Source, or there are hardlinks within the Source and less than 1023 backup sets.

The DeLorean Copy submenue will not appear if more than one folders are selected as source.

DeLorean Copy is long path safe which means it can handle more than 256 characters in pathes. This is important, because placing a copy with quite long path, but still below 256 characters path length, to destination locations might result in combined path length greater than 256 character. In such a situation no data loss must happen, which Delorean copy guaranties with beeing 'long path safe'. Please make sure that Explorer can not show you the result of such a copy, but the files are there. Alternative explorers like SpeedCommander can handle this.

Command Line DeLorean Copy functionality is also available via ln.exe

Backup Mode

Backup mode enables LSE to also copy ACLs and Encrypted Files from all directories, even the ones without access for the current users.

Backup Mode is disabled by default, and can be turned on via the LSE configuration tool.

To perform backup operations a user must hold the SE_BACKUP_NAME and SE_RESTORE_NAME privileges. An out of the box Wndows configuration assigns the Backup-Operator and Administrator group these privileges, but additionally the above privileges can be assigned individually to certain users or groups.

Assigning privileges can be accomplished
By gpedit.msc

Changing Privileges for Backup operations

and navigating to
"Computer Configuration" ->"Windows settings" -> "Security Settings" -> "Local Policies" -> "User Rights Assignments" -> "Backup files and directories"
"Computer Configuration" ->"Windows settings" -> "Security Settings" -> "Local Policies" -> "User Rights Assignments" -> "Restore files and directories"

Without gpedit.msc
Download PolsEdit and add users or groups, who should be able to run backups, to the SE_BACKUP_NAME and SE_RESTORE_NAME privileges.

Volume Mount Point Support

Volume Mountpoints provides functionality to map complete local volumes onto arbitrary disk locations.

Pick volume as source for a Volume Mountpoint

Volume Mountpoints are created in the same way as Hardlinks, except that the Source Link is a volume rather than a file. Select a local volume, click the right mouse button, choose Pick Link Source from the action menu, navigate to the destination folder, click the action button, open the submenu Drop As ... and select Volume Mountpoint:

Drop as Mount Point

Volume Mountpoints can also be created via Drag and Drop when the selected local volume is dragged with the action button pressed to a destination folder; when the right mouse button is released, select the Drop Here ... submenu and then Volume Mountpoint.

Drag a Volume onto a Mount Point

Mount Points can be deleted by using the Unmount Volume command from Explorer as usual.

Delete a Volume Mountpoint

To show the origin of a Volume Mountpoint, the reference column of a Volume MountPoint shows the volume which is mounted onto the selected path.

Make sure that only local volumes can be mounted but not mapped network drives.

The creation and deletion of Volume Mountpoints is bound to successful elevation, which means that the famous UAC dialog must be acknowledged.

Reference Count

As described in the backgrounders section NTFS maintains a reference count for each data stream object how many NTFS directory entries refer to that objects.

To show the reference counts, a column can be enabled in Explorers right pane by action clicking the Titles row of the details view.

Select Columns

After enabling the reference column the reference count is shown for each file.

Reference Count for Hardlinks

Windows7/8/10: The column, which shows the reference count and the origin of the junction is not available, because the way Windows7/8/10 handles user defined columns has been completely revamped by Microsoft and all applications working with so called ColumnHandlers will not work.

Link Properties

Link Shell Extension also supports so called Explorer Property Sheets, which means that if a file or directory property in explorer is opened, Link Shell Extension adds its own tab to show the properties of a hardlink, junction, volume mountpoint or symbolic link.

This additional tab only shows up in the file or directory properties, if the file or directory is a hardlink, junction, volume mountpoint or symbolic link, otherwise this tab is not available.

Property Sheet for Links

Explore
For junctions, volume mountpoints or symbolic links this dialog also shows a 'Explore Target' button, which opens an explorer in the specified directory.

Edit
For Junctions, Symbolic Links or Mountpoints the target field can be edited, and after either pressing the Apply button or leaving the Link Property dialog with ok, the changes are applied to the Junction, Symbolic Link or Mountpoint.

If the Backup Mode is enabled, the ACL of the edited Junction, Symbolic Link or Mountpoint is preserved.

SymbolicLinks

LSE supports the creation of symbolic links.

Creating a Symbolic Link is essentially the same as the other Link creation processes. Action click on the selected file(s) and select Pick Link Source(s) from the action menu.

Pick Link Source

When the destination folder is action clicked the menu contains a Drop As ... submenu, to create a Symbolic Link select SymbolicLink from the submenu. Unlike Hardlinks Symbolic Links can span storage volumes.

Drop a Symbolic Link Folder

If both files and folders are selected as the Source Links and dropped as a Symbolic Link Clone then the selected files are dropped as Symbolic Links alongside newly created Symbolic Link Clone folders.

Symbolic Links can also be created between directories.

Relative versus absolute symbolic link target pathnames
The target of a symbolic link can either be

The configuration tool can switch Link Shell Extension in either relative or absolute mode.

Overlay Icons for Symbolic Links
To help distinguish Symbolic Links from normal files/directories, an overlay icon is implemented on symbolic links that shows a light green arrow icon under the folder.

Overlay Icon for Hardlinks

Overlay icons for Symbolic Links can also be customized.

Enumeration of Hardlinks

Simply select a hardlinked file and selectProperties from the action menu:

Enumerate Hardlinks

The Hardlink Enumeration functionality is also available via command line fromln.exe via the --enum or the --list command line switch.

UAC

Due to UAC some API calls need elevation to administrative level, and this elevation must be acknowledged via the below shown dialog box. So if you see the below box, and the program asking for elevation is LSEUacHelper.exe, it is Link Shell Extensions contribution to UAC and you must acknowledge it to get Symbolic Links created.

vistauac

Change Symbolic Link Privilege

One way to come around the UAC prompt for the creation of Symbolic Links is to globally allow users to create Symbolic Links by changing the policy.

With gpedit.msc
Start gpedit.msc from the command line and grant/revoke specific users the permissions: Under "Computer Configuration" ->"Windows settings" -> "Security Settings" -> "Local Policies" -> "User Rights Assignments" -> "Create Symbolic Links".

Changing Privileges for Symblic Link Creation

Without gpedit.msc
Download PolsEdit and add users to SE_CREATE_SYMBOLIC_LINK_NAME.
Please make sure you log off and log on after changing policies, so that the changes become active.

Linkshell Extension can deal with the above granting of privileges, and if the Symblic Link Privilege is available avoids the UAC prompt.

Developer mode in Windows10
Another way to come around the UAC prompt would be toenable the developer mode, which is available since Windows10/14972.

Remote Capabilities

It is little known, but the SMB networking protocol supports operations to create remote Hardlinks, Junctions and Symbolic Links within SMB mapped network NTFS drives.

This feature is used by Link Shell Extension, to enable the creation of so called Remote Hardlinks, Remote Junctions, or Remote Symbolic Links. e.g.

A Hardlink has been created, which can be easily verified

remotecapabilities

Furthermore SMB1.0 also reports the reference count for Hardlinks and the junction origin for Junctions, which enables Link Shell Extension to show the properties dialog for remote files. Currently the reference count of a hardlink is reported via SMB1.0 in 90% correctly, so please be aware of this restriction.

LSE supports both, mapped network drives and UNC paths.

Mapped but not available network drives can in general be the reason for sloppy explorer startup performance. Delays of a few seconds can be experienced if explorer has to check all drive mappings, especially the ones which are not available. This gets worse, if LSE also checks the status of all drives.

To workaround this caveat the Remote Capabilities of Link Shell Extension can be switched on/off via the configuration tool.

Remote Hardlinks and the SMB version
There are differnet SMB Version implemented in different Windows versions which means different behaviour for hardlinks:

SMB1.0: Windows XP, Windows2000 ...
SMB2.0: Windows Vista ...
SMB2.1: Windows7/8, Windows Server 2008 R2 ...

SMB3.0: Windows10, Windows Server 2012 R2 ...

All of those version support the creation of hardlinks remotely, but since SMB2.0 one can not find out if a file on a remote drive is a hardlink or not.

This means, that e.g if you connect with your Windows XP machine to a SMB2.1 drive, which is provided by a Windows7/8/10 machine, you will not be able to see overlay icons for hardlinked files, but you will be able to create them remotley.

Removeable Media

LSE supports removable media, which have been formatted with NTFS, to create all kind of features it does for fixed drives too. The only limitation is that it intentionally won't work on removable media if they are mounted to drive A: or B:. The reason is that A: or B: are commonly used for floppy drives.

With removable media formatted to NTFS there is the slight chance that LSE reports 'Access denied' problems, when creating hardlinks or junctions. This is due to file object permissions on the removable NTFS drive, which have been created with a different computer on that removable media, thus causing this 'Access denied' messages. The solution here is to change the permission on that removable media as Administrator.

Very long Path

Explorer supports pathnames up to 256 characters, thus limiting all applications to that length for pathnames.

On the other hand NTFS supports pathnames with up to 32767 characters, so one might have already experienced pathnames, which are longer than 256 characters. To deal with that, LSE can handle Very Long Path up to 32767 characters with all operations.

Subst Handling

With the subst.exe command one can create driveletters, which point to a certain path on a NTFS volume. This means that two different driveletters in the end might resolve to locations on the same NTFS volume.
Link Shell Extension checks these situations when it comes to allow the creation of hardlinks, and as a consequence allows the creation of hardlinks among different logical drives if they resolve to the same NTFS volume.

ReFs Support

With Windows Server 2012 Microsoft introduced theReFS filesystem, which is the designated successor to NTFS. But the first implementation of ReFS can do nice things, but lacks a few important features from NTFS like the Hardlink support. Hardlinks are avaialble with ReFs3.5
Link Shell Extension supports ReFS so that one can create Symbolic Links, Mountpoints, Junctions on ReFS volumes. With ReFs version smaller than 3.5 it will throw an error message if a hardlink is about to be created on a ReFS volume. The impact on Link Shell Extension in detail is:

Third Party FileSystems

There are a lot of filesystems out by third party vendors nowadays, which support hardlinks, symlinks... In order to provide the LSE functionality on that drives, the supported filesystems can be configured:
Add your favourite filesystem name in a comma seperated list to

HKEY_LOCAL_MACHINE\SOFTWARE\LinkShellExtension\ThirdPartyFileSystems Changes to the known filesystems from the above registry key take efect after an explorer.exe restart.

If you don't know the name of the filesystem you might determine this by issuingln.exe from a command prompt.

ln --probefs x:

By default Btrfs is configured as a known third party filesystem.

Configuring your favourite filesystem to be recognized by LSE is on your own risk. Basically LSE would do all operations to the configured filesystems, which it does to NTFS. So make sure your filesystem supports the same primitives as NTFS does otherwise certain operations will fail.

Configuration

Link Shell Extension can be tweaked/configured to fit the different personal taste in some aspects. To ease this, Link Shell Extension has a companion called LSEConfig, which changes Link Shell Extension behaviour via a User Interface. Once started, LSEConfig will throw the famous UAC UAC dialog, because Link Shell Extensions settings are changed in the Windows registry.

lseconfiggeneral

Localisation
Link Shell Extension's UI and commands are available in a few languages. You can choose from

Smart Move
It might be useful to totally switch off Smart Move, if there are folders with really much folders. This can be acchieved by ticking the Smart Move checkbox.

Logging
All output of a LSE operation like SmartCopy, SmartMirror, or Delorean Copy is logged to the file %TEMP%\LinkShellExtension.log

Remote Capabilities
It might be useful to totally switch off Remote Capabilities, if there are lots of 'dead network drives' around. This can be acchieved by ticking the Remote Capabilities checkbox.

Outer Junction/Symbolic Link Handling
Decide whether Outer Junctions should be handled as Crop, be Unrolled, which is the default, or Spliced.

Symbolic Link Creation
By selecting either relative or absolute Link Shell Extension will create the target of Symbolic Links respective.

Copy Mode
By checking the Backup Link Shell Extension will run in Backup Mode.

Custom Overlay Icons

Link Shell Extension has built in overlay icons for junctions, hardlinks and symbolic links. Since icons are subject to individual taste, the icon used by Link Shell Extension can be specified.

Changing any settings related to overlay icons will ask for a restart of explorer when Apply or Ok is pressed.

lseconfiggeneral

Overlay Icon
Sometimes it might be useful to totally disable certain overlay icons from Link Shell Extension, which can be acchieved by ticking the checkbox for overlay icons.

Priority
Only one overlay icon can be shown with an icon, but many overlay handlers might apply to provide the overlay icon. To sort this out each overlay handler can specify a priority to explorer and explorer shows the overlay icon with highest priority.
High priority means lower number, with 0 as the highest priority

Custom Icon
By ticking the checkbox for custom icon the Browse... button gets enabled, and an icon can be selected. Keep in mind that custom icons are specific to each user.

General
Windows7/8/10 are a little bit special, because overlay icons for 256x256 must not be in the lower left corner of the icon, and must not be already smaller to perfectly 'overlay' an icon. 256x256 overlay icons must fill up the complete available icon, and also must not be resized.

Or in other words Windows7/8/10 takes any 256x256 icon and resizes it to 92x92, moves it to the left lower corner and overlays.

For all other resolutions smaller than 256x256, Windows7/8/10 you have to prepare an overlay icon in the lower left corner.

For my investigations the icon editor of choice capable of dealing with Windows7/8/10 icons wasRealWorld Icon Editor

Apply Changes
When you press OK or Apply on LSEConfigs dialog, settings will be taken over.

If changes were made to Link Shell Extensions language settings or settings related to overlay icons, you will be asked to confirm a restart of explorer.exe, so that your changes become effective. Restarting explorer.exe means, that e.g. any copy operation or other pending operation within explorer.exe is interrupted.

Backgrounders

Hardlinks are a feature common to many Unix based systems, but are not directly available with Windows. It is a feature, which must be supported by the file system of the operating system.

So what are Hardlinks? It is common to think of a file as being an association between a file name and a data object. Using Windows Explorer, the file system can be readily browsed, showing a 1:1 relationship between the_file name_ and the data object, but this 1:1 relationship does not hold for all file systems.

Some file systems, including UFS, XFS, and NTFS have a N:1 relationship between file name and the data object, hence there can be more than one directory entry for a file.

So, how does one create multiple entries for the same data object? In Unix there is a command line utility ln, which is used to create link entries for existing files, hence there are many file names, or so called Hardlinks, for the one data object.

For each HardLink created, the file system increments a reference count stored with the data object, i.e. it stores how many file names refer to the data object, this counter is maintained (by the file system) within the data object itself. When a file name referencing a data object is deleted, the data object’s reference count is decremented by one. The data object itself only gets deleted when the reference count is decremented to zero.

The reference count is the only way of determining whether there are multiple file name references to a data object, and it only informs of their number NOT there whereabouts.

Junctions are wormholes in the tree structure of a directed graph. By browsing a Junction a maybe far distant location in the file system is made available. Modifying, Creating, Renaming and Deleting files within a junction tree structure operates at the junction target, i.e. if you delete a file in a Junction it is deleted at the original location.

Symbolic Links are to files what Junctions are to folders in that they are both transparent and Symbolic. Transparency means that an application can access them just as they would any other file, Symbolism means that the data objects can reside on any available volume, i.e. they are not limited to a single volume like Hardlinks. Symbolic Links differ from Shortcuts in that they offer a transparent pathway to the desired data object, with a shortcut (.lnk), something has to read and interpret the content of the shortcut file and then open the file that it references (i.e. it is a two step process). When an application uses a symlink it gains immediate access to the data object referenced by the symlink (i.e. it is a one step process).

Limitations

Frequently Asked Questions

IconOverlayHardLink --> ' 'IconOverlayHardLink
IconOverlayJunction --> ' 'IconOverlayJunction
IconOverlaySymbolicLink --> ' 'IconOverlaySymbolicLink and either restart the explorer or log-off and log-on again. The point here is to change the alphabetical order by prepeding one blank. You might end up in a race to the top by adding more and mor blanks, since other OverlayHandlers such as DropBox' have already added a few blanks.

History

in progress Version 4.0.0.0 Complete support for UNC path in any Smart Move/Copy/Clone & Delorean Operation. Lots of little fixes/improvements, I always wanted to do, but never had the time to.
January 16, 2021 Version 3.9.3.5 ln.LSE now maintains its winget package. With SE_CREATE_SYMBOLICLINK assigned to a user, UAC dialog was raised anytime after second attempt. German Translation of Documentation. Pressing F1 in LSEConfig crashed it. Fixed. During Hardlink/Symbolic Link Clone pressing Cancel didn't have an impact. Progress bar prediction has been improved. Fixed crash when username was > 20 chars as non-admin during symbolic link drop. Link ShellExtension now maintains its chocolatey package. Link ShellExtension is public on gitlab.
November 8, 2019 Version 3.9.3.0 For non Admin users under Windows 10, the explorer did not restart after install During custom icon change one was asked to close lots of dependant apps, which is uneccessary. Reboot Explorer.exe is enough. Lots of strings very wrong. Introduced with 3.9.2.8 Removed 'Delete Junction' from main menu. Improved menu hydraulics, e.g. once can not create Smart Copies of Symbolic Link Files. Adapted check for Redistributables to VS2017 and Windows 10. On non NTFS drives, files could not be selected as Link Source. Introduced with 3921 Unmount volume did not work, when elevation was needed. New Windows 10 screenshots for docu and docu streamlining. Signed with a standard code signing certificate During Replace Junction/Symbolic Link/Mountpoint the original attributes got lost The Link Properties Tab showed relative symbolic link dirs as absolute The Link Properties Tab did not show up on dangling Junctions Creation of file symbolic links didn't work in protected folders like 'Program Files' with Developer Mode on. Replacement Junction/Symbolic Link didn't work on dangling Junction/Symbolic Link. UAChelper mixed up relative and absolute link creation. Introduced with 3920 Added Ukranian localization, Finished localisation for missing texts Cross Drive Drops didn't work. Introduced with 3921 Properties Dialog could cause a crash on changing junction targets Autorename had a flaw when having more than 9 files with same name in a directory Backup mode was broken. Introduced with 3921 Introduce Copy Symbolic Link/Junction/Mountpoint Changes of non-admin users to e.g. symlink relativ/absolute had no effect. Fixed the misconception. What a mess LSE is on gitlab.com. For now only private, but hope to change this soon. SmartMirror in LSE had problem with nested reparse points The symbolic replacement mechansism was broken for the elevated use-case. Caused by 3.8.7.2 Improved the progress estimation for the progressbar and introduced the Windows7 progress dialog
December 28, 2018 Version 3.9.0.2 Improved the progress estimation for the progressbar Fixed crash in LSEConfig when it replaced the texts upon startup Removed vcredist-vs2005 check from installer [Internal] but important change from VS2005 (sic) to VS2017. Basically everything compiled smoothly except for the heap, thus... [Internal] Removed the Rockall fast heap. This was neccessary, but also a big performance gain. Memory allocation is 2 times faster, and memory deletion is 10 times faster. Memory allocation is crucial for the core of ln.exe and LSE. [Internal] Dropped Itanium configuration, since VS2017 does not support it anymore, and I am sure there is no Itanium hardware out in the wild anymore.
December 2, 2018 Version 3.8.7.2 The overlay icons didn't show up under 32bit applications. With Windows 10 LSE shows flat icons for symlinks, hardlinks and junctions. Thx to Yaroslav for the icons. The overlay icon for Junctions didn't show up at all with Windows 7. Symbolic Link creation is now possible unelevated for Windows 10/14972 when in developer mode. The property dialog for hardlinks, when used on substituted drives, showed wrong path for the siblings. Third party filesystems can be configured.
April 19, 2016 Version 3.8.6.8 Relative symbolic links on absolute symbolic links to a different drive, were not created properly. Added Greek localization. Thanks to George Malamas! SmartMove didn't work when Backup Mode was enabled. Runs again with Windows 2000 (Flaw introduced with 3.8.6.6). The Vcredist check is back by default, but can be skipped by passing /noredist during install via commandline. Relative symbolic links on UNC path were recreated with wrong target during SmartCopy. NTFS filesystem fragmentation decreased and thus copying should be faster Cancel works when pressed during copying of (large) files. Creation of hardlinks in UAC protected folders caused an error message, even if the hardlink was created.
January 10, 2016 Version 3.8.6.6 Files with a size beeing a multiple of 16777216 were copied properly, but in the logfile generated an error message even if there was none. The progress bar didn't increase properly during Smartmirror if the files were the same. In a rare situation only the first symbolic link of a smart-copy was linked incorrectly. The Auto Rename functionality didn't work in rare situations. Fixed for XP and Windows7/8/10 Adaptions for Windows 10 Tech Preview 9841/9926. Fixed a crash, when files were dropped from Bandzip to the desktop. Added localization for Korean. Thanks to Mireado from Korea! Fixed a crash in W10 when closing the properties dialog on junctions/symlinks. On Windows10 systems which have been upgraded from Windows7 the enumeration of hardlinks siblings via the property page takes very long. Prerequisites install not needed with Windows 10, thus do not check for prerequisites under Windows 10. Prerequisites still checked by installer with Windows10.
June 3, 2014 Version 3.8.5.1 The Backup Mode arrived to LSE. LSE produced logfiles with LF but not CR/LF. Junctions/Symbolic Links/Mountpoints ACLs are preserved when the target is changed either viaReplacement functions or editing from the Link Properties. Japanese translation for LSEConfig. The target of mountpoints can be changed from Link Properties. LSE now can handle Mountpoints during SmartXXX/Delorean operations. WindowsXP: Symbolic links across drives didn't work. WindowsXP: Symbolic links to Volume GUIDs didn't work. WindowsXP: Symbolic links between very long path didn't work. WindowsXP: Lots of tweaks here and there. UNC path as Link Source for SmartCopy/Mirror/Delorean/SymbolicLinkClone now work.
December 29, 2013 Version 3.7.5.9 With Delorean Copy when elevated via LSEUacHelper.exe in rare situations files pointed to by symlinks could get deleted in the source. Ugly. Sorry! A changed file attribute didn't cause the file to be treated as changed during all SmartXXX/Delorean functions. Symbolic Link Clones always created absolute symlinks regardless of the LSE Settings The LastWriteTime, CreationTime and LastAccessTime for files/folders/junctions/symlinks is restored during SmartMirror or DeloreanCopy.
August 23, 2013 Version 3.7.5.1 Dead Junctions to a different drive could lead to not detecting hardlinks during all operations. Very Nasty, but no dataloss caused.
August 4th, 2013 Version 3.7.5.0 For Junctions or Symbolic Links the Target field can be edited in the Properties Dialog. LSE elevates the creation of hardlinks in system protected directories, e.g.: %systemroot%. LSE now offers all its function also in the Library folder. If enabled LSE summarizes the ouptut of operations in a log file. Fixed a crash related to UNC path and Overlay Icons. The progress bar showed wrong/incomplete filename-path combinations during operations on large files. Symbolic links to mapped network drives can be created now via LSE. Replacement functions can be used to repair broken junctions/symbolic links/mountpoints. During SmartCopy/SmartMirror/DeloreanCopy the type (absolute/relative) of symbolic link relation is kept in the destination. During SmartCopy/SmartMirror/DeloreanCopy the Compression Attribute is copied too. The check for prerequisites during install is more accurate aka takes mfc80.dll into account. During un-install it is also checked if the hardlinkshellext.dll is held by some process. Fixed a problem during SmartMirror when a directory changed into a file or vice versa from one mirror to the next and had exactly the same name. The OS Version detection during installation went wrong on certain machines causing symlinke.exe missing from the installation. The eunmeration of hardlink siblings didn't work under XP, when the root dir of a drive had to be traversed. Tested with Windows8, and thus updated the documentation. The x64 version now contains also a 32bit version in one unified install. Deinstallation left over a few registry keys. During installation not all processes were detected, which blocked the installation. Enabled Link Shell Extension on ReFs volumes. Added a Swedish localisation. Thanks to Mikael Grönholm. Added a Turkish localisation. Thanks to Memet. Added a Czech localisation. Thanks to Ashus Added a Slovak localisation. Thanks to RobertS LSEConfig has been localised. The handling of the compression bit during copying/mirroring/deloreaning for files and directories was broken. Draging from or Droping to zipped folders caused an explorer crash. LSEConfig localized to French. Columnprovider shows now shrinked path for junctions if the path is longer than 32characters. On some machines LSEConfig always showed up with French. Introduced with 3.749
June 24th, 2012 Version 3.7.2.0 When working on mapped network drives via SMB or CFIS, as many NAS boxes do, LSE uses a more traditional enumeration mode and this will copy files ( which it did not in any case ). Multiple locations can be selected and the location are treated as a common root with respect to hardlinks/junctions/symbolic links. Nested junctions and symbolic links ( aka junctions on junction on junctions ... ) are now properly restored in any situation. Smartmove had problems with relative symbolic links in rare situations. Italian translation updated. Support for symbolic links under Window XP. Can handle subst.exe created driveletters. Overlay Icons for symbolic links under Window XP are available now. Fixed a few bugs related to WindowsXP and symbolic links handling. Elevation to LSEUacHelper.exe now happens only if UAC is on, or the elevation is really neccesary. Fixed a problem with the creation of absolute symbolic links to directories. The installer came up with Chinese as default installation language. LSEConfig has an About Box, which shows the version of Link Shellextension. Replace Symbolic Link failed when not elevated. Replace Symbolic Link always created absolute symbolic links regardless of the settings when not elevated. Drop Symbolic Link sometimes did not create absolute links when needed in certain situations. The installer now shows the language of the installed OS as default. The installer provides more info in Control Panel/Program and Features. The target of the Symbolic Liks or Junctions can be edited in the properties dialog. Non administrators could not create symbolic links. With XP and the symlink driver installed the Delete Junction menu didn't show up. The status of the privilege for Symbolic Link Creation is checked, so that UAC can be avoided Fixed deployment problems for the Win32bit version.
March 9th 2012 Version 3.6.5.3 Speed improvements during SmartCopy/SmartMirror/HardlinkClone and Delorean Copy. Introduced new Heap Manager Rockall for x64 and x86 builds to gain performance. Russian translation updated. Installation notifies about already running processes, which would make LSE installation fail, because they have loaded dlls from LSE. Fixed issue with Windows 8 installation. Symbolic Link Icon Overlays installation in registry was wrong, causing problems with the green arrow for symlinks.
April 17th 2011 Version 3.6.0.4 With all Smart* functionality, Outer Junctions/Symbolic Links can now be unrolled or spliced. Added Smart Mirror. Speed improvements to Smart Copy, Smart Move and Delorean Copy. The configuration tool does not restart explorer for minor changes to the settings. Symlinks creation resulted in absolute symlinks even if creation of syminks was specified as relative, if their common ancestor was a root dir.
November 21st 2010 Version 3.5.0.1 Introduced DeLorean Copy, which is a way of creating incremental copies using hardlinks. Fixed creating Symbolic Links from Symbolic Link files created Symbolic Link directories.
October 3rd 2010 Version 3.4.0.2 LSE now by default creates relative target path names when creating symbolic links. Symbolic Links now have an overlay icon. Added a configuration tool for LSE options Added a priority level for the indidual overlay icons. Added an option to switch off overlay icons totally for each type of overlay. The Pick Link Source context menu now also shows up on FAT drives, if the item potentially is the source for a LSE operation. Overlay icons can be disabled. Documented how the install directory can specified when using silent (un)install. The menu hydraulics have been reworked, so that it is decided early to only show menu for chioces, which are really possible. LSE and symlink are now linked with ASLR. Tranparency glitches in the Junction overlay icon have been fixed. Hardlink Clone and Symboliclink Clone have been extended so that Inner Junctions and inner Symbolic Links are properly handled. LSE now supports also the replacement of Mountpoints and Symbolic Links. LSE shows a dialog box whether explorer should be restarted or not during non silent installation. Under Windows Vista and Window7 the Delete Junction menu doe not show up anymore.
July 19th 2010 Version 3.3.5.8 LSE now deals with Symboliclinks during Smart Copy. LSE supports Smart Move functionality, which updates inner junctions/symlinks in case of moving/renaming directories Added localization for Brazilian Portuguese. Thanks to Marcio R. for the translation. Fixed flaws of the automatically renaming feature with respect to directories under W7. Overriding custom overlay icons under HKCU was flawed. Hardlink Clone now restores the attributes of cloned folders. Smart Move progress bar showed a wrong caption text. Added Polish localisation, Thanks to Arthur from Poland. Fixed a crash during undeleting files from Recycle Bin. Mountpoints could not be properly created under Windows XP. gFlags was not properly read from the HKCU registry, causing Smart Move Disable and Remote capabilities Disable to malfunction. Fixed the problem of Hardlink Clone stopping unsolictedly after about 500msec.
February 21st 2010 Version 3.2.2.4 Added localization for Chinese and Russian. Thanks to Zuo Weiming and Ivan(b0s) for the translations. Longer lasting operations, like Smart Copy, Symbolic Link Clone,Hardlink Clone, or Enumerate Siblings show a progress bar. The Properties dialog of an item offers an 'Explore Target' button for Junctions, Mountpoints and Symbolic Links. Added localization for Japanese. Thanks to Taka from Japan! Under Windows7 auto rename behaves in the same way as Windows7/8/10 does for '- Copy'.
September 28th 2009 Version 3.1.6.0 With W2K the junction creation was broken. Fixed a handle leak caused by enumerating hardlink siblings under non Vista/W2K8 Under Vista & W7 one can create junctions everywhere without elevation, but not in e.g c:\Program Files. LSE is now aware of this and asks elevation for junction creation when necessary. With drives mapped via a Remote Dektop session, the whole explorer & remote desktop session hang, when this drives was expanded in explorer, but only under W2K3 as terminal server. Support for Windows7 Hardlink Sibling Enumeration now also works for XP, W2K NT4, but due to OS contraints not that fast as with Windows7. Under W2K it turned out, that CreateHardlink() from kernel32.dll with long pathnames (e.g. \\?\) was broken. Fixed a memory leak in serving as COM server.
October 4th 2008 Version 3.0.0.1 There is a new Smart Copy feature, which enables LSE to copy whole folder structures and preserve the inner hardlink and junction structure. Very Long Pathname support added for Smart Copy and Hardlink Clone. Junctions can now be created targeting also Junctions.
June 21st 2008 Version 2.9.5.3 Hardlinks can be enumerated under Vista & Windows7. Fixed a handle leak for HKCU\Software\LinkShellExtension. Removeable media support didn't work, when remote capabilities were switched off.
May 1st 2008 Version 2.9.0.3 Already existing Junctions can be replaced by dragging a directory over it Naming has been streamlined more towards 'Link Shell Extension' If the maximum number 1023 of hardlinks for a file is exceeded, an error message is displayed. This applies for hardlinks and hardlink clones. The Vista & Windows7 junction overlay icon in 256x256 is in proper size. Custom icons can be specified for Junction and Hardlink overlays Version for Itanium available Pick/Drop does not interfere with the creation of Hardlinks, Junctions or Symbolic Links via Drag and Drop. It is now possible to pick a link, then drag another file via right mouse click to some location, drop it there and afterwards drop the first, picked file The property dialog of a Volume Mountpoint now displays the logical drive letter of the mounted drive instead of the odd volume name. Ongoing work towards localisation to East Asian languages. LSE now also works on removable NTFS media, which are not A: or B: The location in the registry to specify the LSE language has changed, since the old place under HKCR was not Vista & Windows7 compatible at all. Default values for language settings and overlay icons settings are copied over automatically to freshly logged on users profile Volume Mountpoint support for Vista & Windows7. Introduced silent install capabilities. Symbolic Links now can be created even if the filename contains UTF-16(Asian)characters. LSE now also works for non Administrators under Vista & Windows7 (after they acknowledged the elevation dialog with the admin password for sure). Symbolic Links for files or directories can now be created across volumes. LSE now can also create Hardlinks from Shortcuts, which didn't work for ages. The print name (the name some can see to the right of a junction, after issuing 'dir' in a command prompt) for Junctions under Vista & Windows7 is now correct. Lots of usability fixes During Installation under Vista64 Explorer automatically gets restarted. The setup contains a check if the VS2005 SP1 Redistributable Package is installed. The setup contains a check if the LSE version for the proper platform is going to be installed. Vista & Windows7 compliant overlay icons for Hardlinks.
January 20th 2008 Version 2.8.0.6 Hardlinks show up with a small overlay icon. This icon will change for Vista compliancy, but at least it is here now. Junctions have a Vista compliant overlay icon in many resolutions Support of creation and deletion ofVolume Mountpoints. Unfortunately this does not work under Vista LSE now prevents the creation of 'loops', when setting up a junction or hardlink clone Hardlink 'cross drive drops' are now not possible anymore Some bug fixes for NT4 Lots of usability fixes
October 16th 2007 Version 2.7.1.0 First fixes for the x64 world. Maybe more to come. Fixing x64 is top priority since I have Q6600 myself now...
March 25th 2007 Version 2.7.0.1 Fixed a nasty bug, which caused HardlinkShellExt to slow down explorer, when it was started. Also fixed the problem that it accessed drive A:, when an explorer started. PropertySheet on file and directory properties will show various info with W2K/XP Delete Junction is back, because sometimes, especially when deleting junctions, which point to directories with big amount of data, the Copyhook Handler does not act as expected. Until this phenomenon is solved, Delete Junction is back.
January 12th 2007 Version 2.6.0 Link Shell Extension is now robust with respect to deleting junctions. Delete commands issued from explorer unlink junctions, but do not delete its content. Due to Junction-awareness of explorer the Delete Junction is gone from the context menu Support for Windows Vista & Windows7. Link Shell Extension is now capable of creating Symbolic Links, but also has a few restrictions related to the Reference column
December 27th 2006 Version 2.5.1 released Added localisation for Italian and Spanish to commands and messages. Thanks to Nicola Guidotto and Diego Segobia for the translations.
December 6th 2006 Version 2.4.0 released Added localisation for French and German to commands and messages
November 26th 2006 Version 2.3.0 released Minor fixes in the installer/deinstaller Introduced the hydraulics of multiple auto rename. If you drop links/junctions in the same directory, now it behaves exactly as explorer and puts numbers on the multiple instantiations of a file.
June 16th 2006 Version 2.2.2 released BugFix. Link Shell Extension is now also able to create hardlinks via Drag and Drop in root dirs of a drive.
May 29th 2006 Version 2.2.1 released Updated documentation after review of Philip Daniels Made a big step forward to being Vista compliant Fixed path length limitations in several places Junctions can span over local NTFS volumes
March 14th 2006 Version 2.1 released Added overlay icons for junctions, so that junction visually pop into your eye.
February 27th 2006 Version 2.0 released Revamped the internal structure of ShellExt. Introduced creation of Hardlink Clones. Introduced submenu in the context menu, when more than one entries would be added to context menu to show the many dropping choices Support for SymbolicLinks with 'Vista'. Support for SymbolicLink Clones with 'Vista'. Fixed crashes when dragging files, and using 'HardLink here'. Fixed problem when showing up wrong menu, when having folders disabled in the left explorer pane. Junctions display their origin in the reference column. A Pick Link operation can be cancelled now. The installer restarts explorer.exe to properly add/remove the shell extension Added an entry to Start Menu/Programs Support for WindowsXP64.
November 26th 2005 Version 1.7 released Added the Delete Junction context menu, when right mouse button is pressed on a junction. Fixed a handle leak in CreateJunction.
January 23rd 2002 Version 1.6 released Added a Columnhandler, so that the reference count of a hardlinked file is shown in explorer. This feature only works with W2K/WXP. Deployment revamped so that the doc is now in .html.
October 27th 2001 Version 1.5 released Revamped internal string handling to Unicode. Added junction support. Junctions are a feature of NTFS5, which allows to hardlink two directories. Added a directory background handler. This means, that after picking a hardlink it is possible to press the right mouse button on the right explorer pane and drop the hardlinks/junctions/symbolic-links.
March 23rd 2001 Version 1.201 released Fixed occurrence of 'Hardlink Here' if shortcuts are selected.
March 23rd 2001 Version 1.20 released Added Drag and drop support
March 20th 2001 Version 1.10 released Fixed the problem, that the help text was not displayed properly Changed the installer to the lean and mean nullsoft installer. Fixed the problem, that read-only files can not be hardlinked Fixed the problem, that hardlinks in the root dir didn't work Tested on W2K and HardlinkShellExt is W2K compliant
May 8th 1999 Version 1.00 released

Status

The 3.9.3.x version is a stable version for the supported plattforms.

Acknowledgements

I wish to thank those who have contributed significantly to the development of Link Shell Extension. Those include:

Felix Kasza for the hardlink basics with NT4.
Nullsoft for the great lean and mean nsis installer
Jean-Pierre Bergamin for the drag and drop support samples.
Travis Illig suggested to add the overlay icons for junctions, which he uses in his Junction Shell Extension.
Mark Russinovich for tips onjunction
Philip Daniels for a technical writers documentation review
Daniel Thibault for the French localisation, and for a dozen of bug reports and feature requests.
Masatoshi Kimura for the symbolic link driver for WindowsXP.
Gerard Durand for the French translation of the documentation

Open Issues

License

Contact / Donations

Bug reports, or feature requests send toHermann Schinagl..
LSE is and will be freeware, but if LSE was really helpful for you and saved lots of your time please think of donations either via PayPal

or by flattring me

or by sending me a gift certificate from

amazon.de .

or by donating bitcoins:

bc1q4hvevwrmnwt7jg8vws0v8xajywhffl4gwca5av

Link Shellextension also has its page on Facebook, where you can find announcements for new releases, and you can discuss feature requests

facebook .

Link Shellextension broadcasts its release notes via RSS.

rss feed .

Download

All Windows 64 This version contains the 64bit version of Link Shell Extension, but also contains a 32bit version, which is installed in parallel to the 64bit version, to satisfy third party filemanagers/explorers like total commander: Link Shell Extension (3.76Mb) All neccesary runtime dlls are already installed on your system, but if not grab it fromhere for 64bit and here for 32bit
All Windows 32 Simply download and install Link Shell Extension (3.56Mb) All neccesary runtime dlls are already installed on your system, but if not grab it fromhere.
ChocolateyInstallation Link ShellExtension can also be installed via chocolatey by issuing choco install linkshellextension
WingetInstallation LSE can also be installed via winget by issuing winget install HermannSchinagl.LinkShellExtension from a command prompt. Make sure you have winget installed.

Legacy Download

All Windows Itanium The Itanium version is not supported anymore, but the last VS2005 based version 3.8.7.2 is kept for legacy. Please make sure that the necessary runtime .dlls are installed on your system. This prerequisites package can be downloaded from Microsoft: vcredist_IA64.exe for VS2005 SP1, version 6195/June 2011 (6.3 Mb) Afterwards install the Link Shell Extension (3.76Mb)
Windows NT4 The version for Windows NT4 will be no more activley developed on, and its functionality is frozen with versionLink Shell Extension 3.2.0.0 (1.13Mb), which basically has all the important features.
Windows 2000Windows XP The version for Windows 2000 and for Windows XP will be no more activley developed on, and its functionality is frozen withLink Shell Extension 3.8.7.2 (32 bit) andLink Shell Extension 3.8.7.2 (64 bit)
Symbolic Link Driver for Windows XP The driver to enable even WindowsXP with symbolic link functionality is provided courtesy of Masatoshi Kimura. You can download the driver from his homepage or from my site acting as a mirror. Symbolic Drivers for WindowsXP 64 (86kb) [Original Location] Symbolic Drivers for WindowsXP 64 (86kb) [Mirror schinagl.priv.at] Symbolic Drivers for WindowsXP (86kb) [Original Location] Symbolic Drivers for WindowsXP (86kb) [Mirror schinagl.priv.at] Sources for Drivers (23kb) [Original Location] Sources for Drivers (23) [Mirror schinagl.priv.at]