IBM Tabulators and Accounting Machines (original) (raw)

Hollerith Type III Tabulator with its wiring panel exposed.Photo: MNRAS, Vol.92, No.7 (1932). Click to magnify. This is one of the granddaddies of IBM's tabulators, when it was still using the Hollerith trademark. It was the first tabulator with a built-in printer.

The Tabulator was invented by Herman Hollerith(Columbia University EM 1879 PhD 1890), for the 1890 US Census, and was an essential part of the computing and business scene for nearly a century. Its basic function is to count and/or add from punched cards and then produce results or reports on dials (early models) or visible counters, or print them on paper, and/or send them to a separate card punch or other device so they can be used in subsequent calculations.

In a typical application a deck of punched cards is read, in which each card contains a series of numeric and/or (later models) alphabetic fields. The machine counts the cards and accumulates totals for each of the desired numeric fields, optionally printing selected fields from each card. When the card deck is finished (or upon some other event), counts and totals are printed and reset.

At first, each tabulator was custom-built for a specific purpose (census, freight auditing, etc). Beginning with the 1906 Type 1 model, the operations for a particular job could be specified on a built-in wiring panel, such as the one shown on the Type III model under the "HOLLERITH" logo, in which card columns or fields were connected by pluggable cables (as on a telephone switchboard) to printer columns and/or counters, as opposed the hardwired connections of earlier models. As you can see in the photo, the Type III had a fixed wiring panel, requiring the machine itself to be rewired for every new job, keeping it idle for extended periods. The Type 3-S and later machines allowed for "offline" wiring of removable plugboards and therefore the accumulation of a "library" of prewired plugboard programs for quick switching from one job to another (CLICK HERE to see an example).

Tabulators could handle positive and (after the mid-1920s) negative numbers, and later ones also alphabetic and special characters, but they could not multiply or divide. In the 1920s and 30s, before other automatic machines capable of multiplication or division were available, tabulators (in combination with card sorters) were turned to scientific applications through such techniques as progressive digiting, devised byCharles Babbage a century earlier, in which tables of squares, cubes, reciprocals, logarithms, and so forth could be produced through a series of additions, and then used to perform complex calculations. The punched-card machine methods for this were pioneered by L.J. Comrie and Wallace Eckert, and from these humble early efforts arose modern computing.

As standalone devices, tabulators and accounting machines are limited to reading data from cards and displaying results locally on counters or paper. If the results were to be used in subsequent calculations, they could (in later models) be fed to a summary punch. In later years, tabulators (by then called accounting machines) could be connected to more powerful equipment, such as multiplying punches and other calculators (such as the 601, 602, 603, 604, etc), the Card Programmed Calculator, or the 650 Magnetic Drum Data Processing Machine (i.e. computer) as input/output devices for reading data and (later) instructions and printing results, while letting the more capable machine do the "higher math" directly.

By the end of 1943, IBM had 10,000 tabulators (64% Type 405, 30% Type 285) on rental [4]. Operation of tabulating and accounting machines provided employment for thousands. The US Government used five different levels of Electric Accounting Machine (EAM) operators, GS-1 through GS-5, right up through the 1980s. Here's a summary table of tabulator chronology; links go to detail pages about particular models, or in some cases just to photographs:

(*) e.g. between card fields and counters.

All the models listed above from 1928 and later (and perhaps some earlier ones as well) saw service at Columbia University. The 407 was the last of IBM's electromechanical accounting machines. The next product from IBM that was capable of doing all the same things (and, of course, more) at an affordable price was a general-purpose electronic digital computer, the 1401 (1959). Yet the 407, a true workhorse and direct descendent of Herman Hollerith's original 1890 Census Tabulator, remained in service (albeit in dwindling numbers) for decades (and at Columbia until at least 1969).

References:

1. Aspray, William (Ed.), Computing Before Computers, Iowa State University Press, ISBN 0-8138-0047-1 (1990), Chapter 4.
2. Austrian, Geoffrey, Herman Hollerith: Forgotten Giant of Information Processing, Columbia University Press (1982).
3. Baehne, George W. (IBM), Practical Applications of the Punched Card Method in Colleges and Universities, Columbia University Press (1935).
4. Bashe, Charles J.; Lyle R. Johnson; John H. Palmer; Emerson W. Pugh,IBM's Early Computers, MIT Press (1985).
5. Pugh, Emerson W., Building IBM: Shaping an Industry and its Technology, The MIT Press (1995).
6. US Office of Personnel Management,
   Electric Accounting Machine Operation Series, GS-0359 (Jun 1960, Jan 1982).
7. 1950's tax preparation: plugboard programming with an IBM 403 Accounting Machine , Ken Shirriff. An excellent introduction to how IBM accounting machines were programmed.
8. The Social Security System, IBM 100, accessed 26 December 2019.

Also See: Herman Hollerith,Sorters,Key Punches,Collators,Reproducers, Interpreters,Calculators.

Translations of this page courtesy of...

[About translations]