Synthesis of High Fracture Toughness of Hydroxyapatite Bioceramics | Scientific.Net (original) (raw)
[1] An, G.H., Wang, H.J., Kim, B.H., Jeong, Y.G. and Choa, Y.H., Fabrication and characterization of a hydroxyapatite nanopowder by ultrasonic spray pyrolysis with salt-assisted decomposition, Materials Science and Engineering: A, Vol. 449-451, 2007, pp.821-824.
DOI: 10.1016/j.msea.2006.02.436
[2] Ramesh, S., Tan, C.Y., Sopyan, I., Hamdi, M. and Teng, W.D., Consolidation of nanocrystalline hydroxyapatite powder, Sci. and Tech. Adv. Mater., Vol. 8, 2007, pp.124-130.
DOI: 10.1016/j.stam.2006.11.002
[3] Afshar, A., Ghorbani, M., Ehsani, N., Saeri, M.R. and Sorrell, C.C., Some important factors in the wet precipitation process of hydroxyapatite, Materials and Design, Vol. 24, 2003, pp.197-202.
DOI: 10.1016/s0261-3069(03)00003-7
[4] Jingbing, L., Ye, X., Wang, H., Zhu, M., Wang, B. and Yan, H., The influence of pH and temperature on the morphology of hydroxyapatite synthesized by hydrothermal method, Ceram. Inter., Vol. 29, 2003, pp.629-633.
DOI: 10.1016/s0272-8842(02)00210-9
[5] Bandyopadhyay, A., Withey, E.A., Moore, J. and Bose, S., Influence of ZnO doping in calcium phosphate ceramics, Materials Science and Engineering: C, Vol. 27, 2007, pp.14-17.
DOI: 10.1016/j.msec.2005.11.004
[6] Manjubala, I. and Kumar, S.S., Effect of TiO2–Ag2O additives on the formation of calcium phosphate based functionally graded bioceramics, Biomaterials, Vol. 21, 2000, p.1995-(2002).
DOI: 10.1016/s0142-9612(00)00092-2
[7] Zreiqat, H., Howlett, C.R., Zannettino, A., Evans, P., Schulze-Tanzil, G. and Knabe, C., Mechanisms of magnesium-stimulated adhesion of osteoblastic cells to commonly used orthopaedic implants, J. Biomed. Mater. Res., Vol. 62, 2002, pp.75-184.
DOI: 10.1002/jbm.10270
[8] Tan, C.Y., Aw, K.L., Yeo, W.H., Ramesh, S., Hamdi, M. and Sopyan, I., Influence of magnesium doping in hydroxyapatite ceramics, IFMBE Proceedings Biomed 2008 "4th Kuala Lumpur International Conference on Biomedical Engineering. (International Federation for Medical and Biological Engineering, Vol. 21, Springer-Verlag Berlin Heidelberg 2008: ISSN 1680-0737) p.326.
DOI: 10.1007/978-3-540-69139-6_83
[9] Ramesh, S., A method for manufacturing hydroxyapatite bioceramic, Malaysia Patent, (PI. 20043325) (2004).
[10] ASTM E1876-97, Standard test method for dynamic Young's modulus, Shear modulus and Poisson's ratio by impulse excitation of vibration, 1998, ASTM International.
DOI: 10.1520/e1876
[11] Niihara, K., Morena, R. and Hasselman, D.P.H., Evaluation of KIc of brittle solids by the indentation method with low crack-to-indent ratios, J. Mater. Sci. Letts., Vol. 1, 1982, pp.13-16.
DOI: 10.1007/bf00724706
[12] Staiger, M.P., Pietak, A.M., Huadmai, J. and Dias, G., Magnesium and its alloys as orthopedic biomaterials: A review, Biomaterials, Vol. 27, 2006, pp.1728-1734.
DOI: 10.1016/j.biomaterials.2005.10.003
[13] Hench, L.L., Bioceramics: from concept to clinical, J. Am. Ceram. Soc., Vol. 74, 1991, pp.1487-1510.
[14] Duan, Y., Wang, C., Cheng, J. and Zhang, X., Bone-like apatite formation in intramuscularly implanted calcium phosphate ceramics in different kinds of animal, J. Mater. Sci. Lett., Vol. 21, 2002, pp.775-778.
[15] Flautre, B., Descamps, M., Delecourt, C., Blary, M.C. and Hardouin, P., Porous HA ceramic for bone replacement: Role of the pores and interconnections – Experimental study in the rabbits, J. Mater. Sci.: Mater. Med., Vol. 12, 2001, pp.679-682.
[16] Rivera-Munoz, E., Diaz, J.R., Rodriguez, J.R., Brostow, W. and Castano, V.M., Hydroxyapatite spheres with controlled porosity for eye ball prosthesis: Processing and characterization, J. Mater. Sci.: Mater. Med., Vol. 12, 2001, pp.305-311.