Running HTML files with emrun — Emscripten 4.0.9-git (dev) documentation (original) (raw)

emrun is a command line tool that can run generated HTML pages via a locally launched web server. This is helpful when using web browsers that cannot run a generated .html file via a file:// URL (e.g. by double-clicking the file) because of the default browser CORS rules.

emrun also enables all kinds of command-line automation, for example, integrating unit tests into an Emscripten environment in a project build farm.

Features

emrun supports the following uses:

• Launch your Emscripten-generated HTML page in a web browser from the command line.
• Capture application stdout and stderr streams during the run, and print them to a terminal or log them to a file.
• Pass command-line arguments to the application and read them from GET parameters in the launched URL, or argc and argv in main().
• Detect when a launched application quits via a call to C’s exit(returncode), then pass the specified return code to the terminal.
• Choose which installed browser to run, or even run a browser on an Android device connected to the local computer through adb.

Quick how-to

Using emrun is simple:

1. Rebuild your Emscripten application and add the --emrun linker flag.

This flag injects code into the generated Module object to enable capture of stdout, stderr and exit().

Note

If you skip this step, you can still run any .html file with emrun, but the capture will not work.

1. Open a terminal, navigate to the build output directory, and call emrun page.html.

This will spawn a new web server to host the page and launch your default system browser to visit that page. emrun will block until the page calls exit(returncode), after which it will quit back to shell with the given process exit code.

Choosing the browser to run

The --browser <filename-or-browser-alias> command line option allows you to launch an HTML file using a particular browser, by specifying either its “browser alias” or the full path to its executable (if the flag is not specified, the default system browser is launched).

To enumerate the list of browser aliases on your system, use the --list_browsers command:

emrun --list_browsers

emrun has automatically found the following browsers in the default install locations on the system:

• firefox: Mozilla Firefox 26.0.0.5087
• firefox_beta: Mozilla Firefox 26.0.0.5077
• firefox_aurora: Mozilla Firefox Aurora 28.0.0.5098
• firefox_nightly: Mozilla Firefox Nightly 29.0.0.5098
• chrome: Google Chrome 31.0.1650.63
• chrome_canary: Google Chrome 34.0.1752.0
• iexplore: Microsoft Internet Explorer 11.0.9600.16384
• opera: Opera 18.0.1284.63

Note

For your browser to be detected, it should be installed in the default install location on the system (%ProgramFiles% on Windows and /Applications/ on macOS) or by adding it to the PATH for the current user.

You can pass the --browser <alias> option to launch with a given browser. For example, to run the Firefox Nightly browser you would call:

emrun --browser firefox_nightly page.html

To launch using a browser’s filename use:

--browser /path/to/browser/executable page.html

If you just want to launch a web server you can pass the --no_browsercommand line flag. In this case emrun will run the server without spawning the browser (this is similar to using alocal webserver).

Security implications

emrun spawns its own web server to host the target .html file. This has the following security implications:

• The web server is a generic file server that by default serves all files in the directory where the .html file resides, and all directories under that directory tree.
• The web server will be visible to other computers on the same network.

Controlling web server operation

The following command line flags control how emrun spawns the web server:

• --no_server: Do not launch a web server. The target file is run via the file:// protocol, if possible.
• --serve_after_close: Do not quit emrun; continue running the server even after the user closes the web browser. Use this flag when you want to visit the page multiple times or with different browsers during the same run.
• --serve_after_exit: Do not quit emrun; continue running the server after the page finishes with a call to exit(returncode).
• --serve_root <path>: Specify a custom directory to use as the root directory for the spawned web server. By default, the directory where the .html file resides is used.
• --port <number>: Specify the web server TCP port. The default port is 6931.
• --silence_timeout <seconds>: Specify the emrun silence timeout. If the application does not print anything to stdout or stderr in this many seconds, the page/browser is assumed to be hung, and emrun will quit. This is disabled by default.
• --timeout <seconds>: Specify the emrun timeout. If the whole page run lasts longer than this many seconds, the page/browser is assumed to be hung, and emrun will quit. This is disabled by default.
• --hostname <name>: Specify the web server TCP hostname. The default hostname is localhost.
• --timeout_returncode <code>: Specifies the process return code that emrun quits with if a page run timeout occurs. By default this is 99999.

Controlling log output

The following command line flags affect logging output:

• --verbose: Print detailed information about emrun internal steps.
• --log_stdout <filename>: Write all stdout messages from the application to the named file (instead of printing to terminal).
• --lot_stderr <filename>: Write all stderr messages from the application to the named file (instead of printing to terminal).
• --system_info: Print detailed information about the current system before launching. This is useful during automated runs when you want to capture hardware information to logs.
• --browser_info: Print information about which browser is about to be launched.
• --no_emrun_detect: Hide the warning message that is launched if a target .html file is detected to not have been built with --emrun.

Cleaning up after the run

These command line flags allow you to clean up open browser processes before starting a new run — this is important for automated testing on build servers:

• --kill_start: Terminate all instances of the target browser process before starting the run. Pass this flag to ensure that no old (hung) instances of the target browser process exist that could interfere with the current run. This is disabled by default.
• --kill_exit: Terminate all instances of the target browser process when emrun quits. Pass this flag to ensure that browser pages closed when the run is over. This is disabled by default. Note that it may be necessary to explicitly use the --browser=/path/to/browser command line option when using --kill_exit, or otherwise the termination might not function properly.

Warning

These operations cause the browser process to be forcibly terminated. Any windows or tabs you have open will be closed, including any that might contain unsaved data.

Running web pages in Firefox

When running web pages via emrun using Firefox, you may want to set one or more of the following browser prefs:

; Make sure to unblock popups being spawned from http://localhost/. browser.popups.showPopupBlocker;false

; Don't ask the user to change the default browser when spawning the browser. browser.shell.checkDefaultBrowser;false

; Don't autorestore previous tabs, just open the one from the command line. browser.sessionstore.resume_from_crash;false services.sync.prefs.sync.browser.sessionstore.restore_on_demand;false browser.sessionstore.restore_on_demand;false

; Don't bring up the modal "Start in Safe Mode" dialog after browser is killed, since ; that is an expected path for --kill_start and --kill_exit options. browser.sessionstore.max_resumed_crashes;-1 toolkit.startup.max_resumed_crashes;-1

; Don't fail on long-running scripts, but have emrun instead control execution termination. dom.max_script_run_time;0 dom.max_chrome_script_run_time;0

; Accelerate browser update background timer tick so that autoupdates take place as quickly as possible. ; This is useful for continuous integration servers wanting to always test the latest browser version. app.update.download.backgroundInterval;1

; Always run in private browsing mode to avoid caching any pages (but also disables IndexedDB persistency!). browser.privatebrowsing.autostart;true

; When switching between multiple Firefox browser versions/channels, suppress showing the first time welcome page. startup.homepage_override_url;about:blank startup.homepage_welcome_url;about:blank

To set a Firefox browser pref, navigate to the page about:config in the browser navigation bar.

Running web pages on an Android device

emrun can automate browser-based testing on Android.

For this to work, you need to:

• Connect an Android phone to the local system via USB, with its developer mode enabled. There is no need to root the phone.
• Install the adb tool on the host system and make sure it is present in the PATH environment variable.
• Check that adb is working by calling adb devices to see that your device is listed.
• Install any browser apk to the device that you want to be able to run.

To run on Android, add the --android command line flag and use the --browser <alias> command line flag to explicitly choose the correct browser to run.

Note

Omitting --browser (to launch a default Android browser) is not supported.

Note

Running on Android will omit the --hostname option

The following browser aliases have been tested and shown to work: firefox, firefox_beta, firefox_aurora, firefox_nightly, chrome, chrome_beta, opera.

The following browser aliases are also supported, but have known issues:

• opera_mini: The browser launches, but for some reason it times out when trying to load any page.
• dolphin: Works, but does not support WebGL.

Otherwise, using emrun for browser-based testing on Android is the same as when testing on the host system.