Purchasing advisor for beam splitters with supplier directory and AI-based advice; plates, non-polarizing cubes, optical splitting, interferometers (original) (raw)

Find all you need for professional sourcing of beam splitters: a comprehensive expert-curated directory of suppliers, scientific and technical background information, and an interactive AI-based tool with guidance for a structured decision process.

NEW: Not only hardware can be listed here, but also consulting, software, training on beam splitters, etc. – see the "offer types" below.

🌐 You appear to be visiting from North America. Many listed suppliers are based in this region, making the RP Photonics Buyer's Guide highly relevant for your needs.

Purchasing high-value photonics products is a substantial responsibility. Using a structured decision-making process and high quality supplier data helps a lot:

• Find all relevant suppliers (not limited to advertisers).
• Our interactive tool conveniently assists you in defining and applying your application-specific requirements.

Note that purchasing decisions based on just a few randomly picked suppliers and without carefully defined specifications are risky; therefore, we strongly recommend using our data and tool. See also:

• How Responsible Purchase Decisions for Expensive Goods Like Lasers Are Done
• Explanations on this purchasing tool

Go through the process:

1. Understand the technical background

2. Define your requirements

It is essential to fully understand and clearly define your requirements before you purchase.

We recommend that you develop a list of clear specifications according to your specific needs, against which you can later check the suitability of found product offers:

To help you, we have already listed some aspects we recommend you consider when buying beam splitters. Of course, there may be other aspects that are relevant to your specific case.

This list is for your own preparation, and can later (possibly in modified form) be used for quotation requests to suppliers.

I think that I am sufficiently informed about our requirements.

Otherwise, you will need to talk to your technical colleagues.

I consider the above list of specifications to be sufficiently complete, clear and accurate.

If you cannot sufficiently clarify your requirements, you may want to get technical consultancy from RP Photonics.

Insert these criteria when creating inquiry mails to suppliers with the buttons "Get quotation".

You find these buttons in the supplier list below or under "3. Find suitable suppliers".

3. Find suitable suppliers

We suggest three steps:

• Below, you can find our list of suppliers for beam splitters. Use the checkboxes to mark possibly suitable suppliers.
• The selected suppliers will appear below this list, along with your list of specifications. You can then indicate which specifications they meet according to your research. (You should finalize your specifications before doing this.)
• Based on the results, you can finally choose a supplier that is hopefully a good enough fit.

Selected suppliers:

(none so far)

Decision

The most suitable supplier you found:

Comments, e.g. reasons for your choice, or things which still need to be checked:

4. Document the decision process

It is essential to document your purchasing process, not only its result (chosen supplier):

• You will find it easier next time.
• If something goes wrong, you can defend your decision by showing that you properly considered all important aspects. Or you see what needs to be done better next time.

Our interactive tool makes it easy: Fill out the form, and in the end print it to a PDF. Note that the document will show all sections (including those not currently shown on the screen), while omitting some irrelevant details such as the page navigation.

Suppliers for Beam Splitters

186 suppliers for beam splitters are listed in the RP Photonics Buyer's Guide, out of which 18 present their product descriptions and images. Both manufacturers and distributors can be registered.

YOUR KEY to innovation and success UltraFast Innovations GmbHDieselstr. 585748 Garching (München)GermanySee us at Photonics West 2026 in San Francisco, Jan. 20–22 (booth 2035)!	⚙ hardware UltraFast Innovations (UFI®) manufactures various beamsplitters suitable for broadband ultrashort pulses: they provide consistent performance over a broad bandwidth and low group delay dispersion (GDD). Versions for different wavelengths, splitting ratios, and angles of incidence are available. Product-specific web page

Quality You Can Trust, Expertise You Can See. Hangzhou Shalom Electro-optics Technology Co., Ltd.A635, Boke MansionNo. 9 Xiyuan RoadXihu District, Hangzhou 310030China

⚙ hardware🧩 accessories and parts🧴 consumables🔧 maintenance, repair📏 metrology, calibration, testing💡 consulting🧰 development Hangzhou Shalom EO offers stocked and custom beamsplitter cubes including high power polarizing beamsplitter cubes, polarizing beamsplitter cubes, and non-polarizing beamsplitter cubes. With superb production craft, Shalom EO is capable of delivering beamsplitter cubes with an extinction ratio of an extensive range between 300:1 to 10000:1 and precise dimensional tolerance. Low loss AR coatings of various laser line wavelengths and broadband spectra can be deposited. Shalom EO's beamsplitter cubes are available in cemented or optical-contacted structures. For the high-power laser polarizing beam splitter cubes, Shalom EO utilizes the adhesive-free, optical-contacted method to assemble the constituent prisms, the cubes are high-precision laser-grade polished to ensure minute wavefront distortion and allow optical contact, the beamsplitters exhibit a high laser induced damage threshold LIDT of >15 J/cm2 @ 1064 nm, 20 ns, 20 Hz. In addition, Hangzhou Shalom EO also supplies a wide selection of dichroic filters including longpass dichroic filters, shortpass dichroic filters, dichroic filters for RGB light shows, laser line dichroic filters (various HR or HT coatings at specific wavelengths), and other categories encompassing dichroic bandpass filters, dichroic band stop (notch) filters. Product-specific web page

Your problem is our challenge – flexibility is our standard! Artifex Engineering GmbH & Co KGDortmunder Str. 16–1826723 EmdenGermany

⚙ hardware Artifex Engineering offers high quality custom beamsplitters tailored to your requirements. Coatings for single wavelengths or broadband are possible in the UV-NIR range. We offer beam splitters as plates, cubes and pentaprisms. Artifex offers unpolarized, non polarizing and polarizing versions for the three types. Visit our product page for more information. We look forward to your inquiry. Product-specific web page

Precision Optics & Coatings for High Energy Laser Applications Perkins Precision Developments4110 North Valley DriveLongmont, CO 80504United StatesSee us at Photonics West 2026 in San Francisco, Jan. 20–22 (booth 2048)!

⚙ hardware Perkins Precision Developments (PPD) offers a range of precision laser optics and optical assemblies, including: Polarizing beam splitters Beam splitter cubes Dichroic laser mirrors Prism polarizers Partial reflectors Output couplers These products are suitable for both R&D and OEM applications. Utilizing Ion Beam Sputtering (IBS) coating technology, PPD ensures that their beam splitters and assemblies are environmentally stable, with no spectral shift due to time, moisture, or temperature. Key features of PPD's products include: Low absorption and high damage thresholds (>20 J/cm2) Ideal for high energy Nd:YAG and fiber lasers, as well as other high-power pulsed and CW laser systems Space-flight qualified PPD also offers custom services such as dielectric beam splitter coatings and low-loss anti-reflection (AR) coatings on customer-supplied substrates, including flats, curves, and prisms. Product-specific web page

Optical Coatings with knowledge, quality & speed Vortex Optical Coatings Ltd.10 Jacknell RoadDodwells Bridge Industrial EstateHinckleyLeicestershire LE10 3BSUnited Kingdom	⚙ hardware At Vortex we can design and manufacture any custom beamsplitters, beam-combiners, and dichroic filters between 300 nm to 6000 nm whether they be cubes, plates or polarising filters. We are able to provide comprehensive spectral reports for any angle of incidence for all enquiries. Product-specific web page

Optical components at better price SinoptixOffice 16 D, Yujia MansionN° 1336 HuaShan RoadShanghai 200052China	⚙ hardware We offer on-demand fabrication for beam splitters. Cube beams splitters (CBS) or plate beam splitters. Custom coatings to reach customer needs. Product-specific web page

The Future Depends on Optics Edmund Optics101 East Gloucester PikeBarrington, NJ 08007United StatesSee us at Photonics West 2026 in San Francisco, Jan. 20–22 (booth 1139)!

⚙ hardware Edmund Optics offers plate, cube, pellicle, polka dot, and specialty prism beamsplitters in a variety of anti-reflection coatings or substrates. Standard beamsplitters, which split incident light by a specified ratio that is independent of wavelength or polarization state, are ideal for illumination subassemblies or as one way mirrors. Dichroic beamsplitters, which split light by wavelength, are often used as laser beam combiners or as broadband hot or cold mirrors. Non-polarizing beamsplitters, ideal for laser beam manipulation, split light by overall intensity. Polarizing beamsplitters, often used in photonics instrumentation, split light by polarization state. Edmund Optics’ anti-reflection coatings are designed for the ultraviolet (UV), visible, or infrared (IR). Product-specific web page

Your Custom Optics Expert Shanghai Optics Inc.425 Main St Suite 2EMetuchen, NJ 08840United States	⚙ hardware Shanghai Optics manufactures custom cubic beamsplitters, plate beamsplitters, and lateral displacement beamsplitters. All our beamsplitters are made of high quality glass, with high surface quality to allow tight tolerance on all parameters. Product-specific web page

Your company's products are not listed here? Get our Advertising Package to enjoy that and many other benefits!

If any displayed information is incorrect (e.g., a listed supplier does not offer such products) or legally problematic, please notify RP Photonics so that the problem can be solved.

Report Additional Suppliers for These Products

If you are a supplier and want to be listed, please use the registration form.

An already registered supplier can use a customized form to report the full list of offered photonics products. That form is reachable with the red button "Edit profile data" on the supplier's profile page.

Anyone, not only suppliers themselves, can [**report additional suppliers**](/report%5Fsupplier.html?product=Beam Splitters).