Purchasing advisor for black coatings with supplier directory and AI-based advice; absorbing coatings, stray light suppression, high emissivity (original) (raw)

Find all you need for professional sourcing of black coatings: a comprehensive expert-curated directory of suppliers, scientific and technical background information, and an interactive AI-based tool with guidance for a structured decision process.

NEW: Not only hardware can be listed here, but also consulting, software, training on black coatings, etc. – see the "offer types" below.

🌐 You appear to be visiting from North America. Many listed suppliers are based in this region, making the RP Photonics Buyer's Guide highly relevant for your needs.

Purchasing high-value photonics products is a substantial responsibility. Using a structured decision-making process and high quality supplier data helps a lot:

Note that purchasing decisions based on just a few randomly picked suppliers and without carefully defined specifications are risky; therefore, we strongly recommend using our data and tool. See also:

Go through the process:

1. Understand the technical background

It is important to sufficiently understand the technology before buying.

Use the comprehensive learning resources of RP Photonics:

encyclopedia article

black coatings

If you need personal help, contact RP Photonics to get technical consultancy.

I feel that I sufficiently understand the technical background.

2. Define your requirements

It is essential to fully understand and clearly define your requirements before you purchase.

We recommend that you develop a list of clear specifications according to your specific needs, against which you can later check the suitability of found product offers:

To help you, we have already listed some aspects we recommend you consider when buying black coatings. Of course, there may be other aspects that are relevant to your specific case.

This list is for your own preparation, and can later (possibly in modified form) be used for quotation requests to suppliers.

I think that I am sufficiently informed about our requirements.

Otherwise, you will need to talk to your technical colleagues.

I consider the above list of specifications to be sufficiently complete, clear and accurate.

If you cannot sufficiently clarify your requirements, you may want to get technical consultancy from RP Photonics.

Insert these criteria when creating inquiry mails to suppliers with the buttons "Get quotation".

You find these buttons in the supplier list below or under "3. Find suitable suppliers".

3. Find suitable suppliers

We suggest three steps:

Selected suppliers:

(none so far)

Decision

The most suitable supplier you found:

Comments, e.g. reasons for your choice, or things which still need to be checked:

4. Document the decision process

It is essential to document your purchasing process, not only its result (chosen supplier):

Our interactive tool makes it easy: Fill out the form, and in the end print it to a PDF. Note that the document will show all sections (including those not currently shown on the screen), while omitting some irrelevant details such as the page navigation.

Suppliers for Black Coatings

7 suppliers for black coatings are listed in the RP Photonics Buyer's Guide, out of which one presents their product descriptions and images. Both manufacturers and distributors can be registered.

AcktarWe like it black ACM Coatings GmbH (subsidiary of Acktar Ltd.)Jakobsring 306618 Naumburg (Saale)GermanySee us at Photonics West 2026 in San Francisco, Jan. 20–22 (booth 4428)! ⚙ hardwareblack coatings AcktarBlack™ Direct Coating Services suppress stray light in high-performance optics with no extra effort using advanced optical black coatings for stray light absorption in ultra-violet, visible light spectrum and infrared wavelengths. Extremely low reflectance, high thermal stability, high absorptance, high emissivity, excellent adhesion to essentially all materials and low outgassing in a few microns of a coating. You say when, and we coat it for you! AcktarBlack™ coatings are available not only for direct application to parts, but also as coated foil or film. The coated foils enable the customer to benefit from Acktar coatings performance without sending the parts to Acktar. This is an ideal solution for very large quantities, over-sized part areas and for contaminated environments where the light absorbing surface needs to be periodically renewed. The black foil coating are available with or without an adhesive backing as sheets, die-cuts or roll. Product-specific web page

Your company's products are not listed here? Get our Advertising Package to enjoy that and many other benefits!

If any displayed information is incorrect (e.g., a listed supplier does not offer such products) or legally problematic, please notify RP Photonics so that the problem can be solved.

Report Additional Suppliers for These Products

If you are a supplier and want to be listed, please use the registration form.

An already registered supplier can use a customized form to report the full list of offered photonics products. That form is reachable with the red button "Edit profile data" on the supplier's profile page.

Anyone, not only suppliers themselves, can [**report additional suppliers**](/report%5Fsupplier.html?product=Black Coatings).