geometrical optics (original) (raw)

Author: the photonics expert (RP)

Definition: a concept of optics which is based on the propagation of light rays, ignoring wave properties of light

Alternative terms: geometric optics, ray optics

Category: general optics

• optics
  • geometrical optics
  • wave optics
  • Fourier optics
  • quantum optics
  • Gaussian optics
  • technical optics
  • aspheric optics
  • adaptive optics
  • diffractive optics
  • integrated optics
  • fiber optics
  • flat optics
  • micro-optics
  • freeform optics
  • laser optics
  • nonlinear optics
  • ultrafast optics
  • infrared optics
  • ultraviolet optics
  • (more topics)

Related: opticsGaussian opticsparaxial approximationwave opticslight beams

Opposite term: wave optics

Page views in 12 months: 1741

DOI: 10.61835/peq Cite the article: BibTex BibLaTex plain textHTML Link to this page! LinkedIn

Content quality and neutrality are maintained according to our editorial policy.

Contents

What is Geometrical Optics?

Geometrical optics is a widely used concept in optics, where the propagation of light is described with geometric light rays. An equivalent term is ray optics.

The following assumptions on light rays are made:

• They have no transverse extension, i.e., a zero thickness.
• In homogeneous optical materials (e.g. optical glasses or air), they are straight lines.
• They can be reflected or deflected (refracted) at smooth optical interfaces, with certain laws determining the outgoing ray directions.
• They can be stopped e.g. when hitting some optical aperture.
• Light rays can cross without influencing each other.

Attempts for physical interpretations of light rays can be successful only to a quite limited extent. For example, rays were interpreted as the paths of some rapidly moving light particles, but this picture is not consistent with various observations. There are some similarities between geometrical light rays and real light beams, in particular with laser beams; for example, a laser beam can at least be relatively narrow and propagate along a straight line in a homogeneous medium. However, real light beams always have a finite transverse extension and exhibit the phenomenon of diffraction. Therefore, geometrical rays are only a rather abstract representation of actual light rays. Their behavior can be derived from wave optics in the limiting case of vanishing optical wavelength.

Reflection of Light Rays

On the surface of a flat mirror, a light ray is assumed to be reflected such that the output angle equals the input angle (both measured against the normal direction). For a curved mirror, one does that calculation based on a tangential flat plane. Figure 1 shows an example with reflection on a curved mirror.

Figure 1: Reflection of light rays at a spherically curved mirror.

Modified laws can be applied in the case of diffraction gratings, where additional diffracted rays emerge at different angles.

Refraction of Light Rays

When a ray hits an interface between two different transparent media, a portion is reflected, and another portion is transmitted; for the latter one, which is refracted, the propagation direction is generally modified according to the Snellius law of refraction. Figure 2 shows an example case for a ball lens, where only the refracted rays (which are usually stronger) have been drawn.

Figure 2: Focusing of light with a ball lens. While the paraxial rays have a focus position as indicated with the gray vertical line, the outer rays are more strongly refracted.

Curved Rays

In optically inhomogeneous media, light beams may propagate along curves instead of straight lines. In geometrical optics, one may correspondingly assume curved ray paths. An example is shown in Figure 3, showing the focusing of light in a gradient-index lens. The rays get deflected in the lens and may exactly meet in a focal point if the lens is optimized.

Figure 3: Ray paths in and after a gradient-index lens. Within the lens (the gray area), the rays are curved.

Figure 4 shows how the beam radius, calculated with wave optics, evolves. Here, one can see that the beam radius in the focal point has a finite value related to diffraction.

Figure 4: Evolution of beam radius for an originally collimated Gaussian beam going through a GRIN lens.

In geometrical optics, and particularly in Gaussian optics, certain quantities are often related to light rays:

• Points to which some bundle of rays converges are called focal points. For variable directions of input beams, for example, the focal points may lie in a focal plane, or actually often on a curved surface.
• Principal planes are defined based on the intersections of extrapolated rays in an optical system.
• A focal length is often defined based on a distance from a focal point to a principal plane, or sometimes to a geometric position of an optical device.

Special Rays

Certain light rays have a special importance in geometrical optics:

• The chief ray of a ray bundle, which is limited by some aperture, is the one going through the center of that aperture.
• Marginal rays are those passing at the edges of apertures.

Ray Tracing

The propagation of light rays, as shown in the figures above, is calculated based on purely geometrical considerations. The used technique is called ray tracing and is usually applied with specialized optics software. The calculations can be geometrically exact, i.e., valid even for large incidence angles. Curved surfaces may have any geometric shapes. Depending on the initial direction of a light ray, it may or may not hit a certain optical component.

Rays may be split up into multiple rays, e.g. due to partial reflection and transmission at interfaces, or due to multiple diffraction orders at gratings. In the context of diffuse optical scattering, one may employ stochastic methods for representing the scattered light with some limited number of rays. For multiple diffuse reflections, this may of course result in a very large number of rays to be treated.

One may not only need to know the paths of multiple rays, but also derive various results from them. For example, ray tracing software may identify focal planes, calculate image magnification or estimates resulting optical intensities and colors.

Ray tracing can be used for many purposes, for example for studying the detailed properties of imaging systems including their optical aberrations and effects of misalignment and imperfections from optical fabrication, or for the design of illumination systems.

Paraxial Optics

In many situations, one can use simplified equations which describe the approximate propagation of rays which stay close to the optical axis in terms of lateral offset and direction. Any terms of second or higher order are ignored; for example, one may consider the deflection of a ray at a curved lens surface as occurring in the plane touching the surface, ignoring a longitudinal position error of second order in the lateral offset.

Many useful relations can be derived based on such paraxial optics, which would otherwise be far more complicated or not analytically solvable at all.

The paraxial approximation is widely used in Gaussian optics.

The paraxial case is also often used as the reference case, for example for the study of optical aberrations.

Limitations of Geometrical Optics

The main limitation of geometrical optics is that it ignores the wave properties of light, as described in wave optics. In particular, that means that the phenomena of diffraction, interference and polarization are not taken into account. This is not a substantial problem in many practical cases, where such effects may be negligible or can be taken into account separately. For example, one can study the optical aberrations of an imaging system with geometric optics, being aware that even for perfect compensation of aberrations one will not obtain perfectly sharp images due to the diffraction limit. However, aberrations often remain a more severe limitation than diffraction, which can thus often be safely ignored.

Ignoring diffraction becomes a serious problem when treating the propagation of light under conditions where it experiences tight confinement. For example, light propagation in single-mode fibers cannot be realistically described at all with geometrical optics. One may still define the numerical aperture of a fiber, for example, based on geometrical optics, but such a quantity then has only a limited meaning for the actual propagation of light in the fiber. Even for multimode fibers with many modes, geometrical optics is only of quite limited utility. It can be completely misleading, for example, concerning optical phase delays of fiber modes [1].

Similarly, light propagation in multilayer coatings cannot be realistically analyzed with ray optics because interference effects are essential.

To some extent, the deficits of geometrical optics can be amended by adding additional properties to rays. For example, one may attribute some optical power to each ray in a ray tracing simulation, taking into account power losses by absorption, incomplete reflection, etc. Similarly, one may add polarization properties and optical phases, for example for calculations on an interferometer setup. A simpler example is the calculation of different ray paths for different polarization directions, for example when analyzing a polarizing prism.

In some areas, one finds an interesting correspondence between quantities from geometrical optics and wave optics:

• The ABCD matrix algorithm has been developed in geometrical optics, but the components of that matrix can also be used for Gaussian beam calculations.
• Optical resonators can be analyzed in terms of geometrical stability, and it turns out that the properties of resonator modes as calculated with wave optics have substantially different properties depending on whether or not a resonator is geometrically stable.

Frequently Asked Questions

What is geometrical optics?

Geometrical optics, also called ray optics, is a model of optics where the propagation of light is described using the concept of geometric light rays. These rays are assumed to travel in straight lines in homogeneous media.

What are the fundamental assumptions about light rays in geometrical optics?

Light rays are assumed to have zero thickness, travel in straight lines in homogeneous materials, and can be reflected or refracted at optical interfaces according to specific laws. They can cross without influencing each other.

How are reflection and refraction described in geometrical optics?

At a reflective surface, a ray's output angle equals its input angle. When a ray enters a different transparent medium, it is refracted, meaning its propagation direction changes according to Snell's law of refraction.

What is ray tracing?

Ray tracing is a computational technique used in geometrical optics to calculate the paths of light rays through an optical system. It is used for analyzing imaging systems, studying optical aberrations, and for the design of illumination systems.

What is paraxial optics?

Paraxial optics is a simplification within geometrical optics that applies to rays staying close to the optical axis. It ignores higher-order terms in calculations, which simplifies many problems and is widely used in Gaussian optics.

What are the main limitations of geometrical optics?

How does geometrical optics relate to wave optics?

Geometrical optics is the limiting case of wave optics that applies when the optical wavelength is vanishingly small. It fails to be accurate when wave phenomena like diffraction become significant, for example in tightly focused beams.

Bibliography

(Suggest additional literature!)

Questions and Comments from Users

Here you can submit questions and comments. As far as they get accepted by the author, they will appear above this paragraph together with the author’s answer. The author will decide on acceptance based on certain criteria. Essentially, the issue must be of sufficiently broad interest.

Please do not enter personal data here. (See also our privacy declaration.) If you wish to receive personal feedback or consultancy from the author, please contact him, e.g. via e-mail.

By submitting the information, you give your consent to the potential publication of your inputs on our website according to our rules. (If you later retract your consent, we will delete those inputs.) As your inputs are first reviewed by the author, they may be published with some delay.