lasers for Raman spectroscopy (original) (raw)

Definition: lasers which are specifically suitable for applications in Raman spectroscopy

Categories: laser devices and laser physics, optical metrology

• light sources
  • lasers
    * solid-state lasers
    * diode-pumped lasers
    * lamp-pumped lasers
    * distributed feedback lasers
    * dye lasers
    * gas lasers
    * free-electron lasers
    * radiation-balanced lasers
    * cryogenic lasers
    * visible lasers
    * eye-safe lasers
    * infrared lasers
    * ultraviolet lasers
    * X-ray lasers
    * upconversion lasers
    * Raman lasers
    * high-power lasers
    * multi-line lasers
    * narrow-linewidth lasers
    * tunable lasers
    * pulsed lasers
    * ring lasers
    * seed lasers
    * ultrafast lasers
    * industrial lasers
    * scientific lasers
    * alignment lasers
    * medical lasers
    * space-qualified lasers
    * miniature lasers
    * OEM laser modules
    * lasers for material processing
    * lasers for quantum photonics
    * lasers for Raman spectroscopy
    * (more topics)

Related: Raman spectroscopynarrow-linewidth lasers

Page views in 12 months: 748

DOI: 10.61835/m61 Cite the article: BibTex BibLaTex plain textHTML Link to this page! LinkedIn

Content quality and neutrality are maintained according to our editorial policy.

📦 For purchasing lasers for Raman spectroscopy, use the RP Photonics Buyer's Guide — an expert-curated directory for finding all relevant suppliers, which also offers advanced purchasing assistance.

Contents

Introduction

Raman spectroscopy is a technique of spectroscopy, used primarily for chemical analysis and various types of material characterization. In the simplest and most common case, the sample under investigation is irradiated with an intense light beam (usually a continuous-wave laser beam), and the small part of the power which is scattered by spontaneous Raman scattering is detected. The optical spectrum of that scattered light is often quite characteristic of a certain material; it typically contains some peaks where the Stokes shift is related to the frequency of a molecular vibration. However, there is usually far more light scattered without a frequency shift (Rayleigh scattering), which does not carry the desired information and must be filtered out.

Requirements on the Laser

The following features of a laser are typically required in Raman spectroscopy:

Wavelength and Optical Linewidth

The choice of laser wavelength can be influenced by several considerations:

• Short wavelengths are very much favored by the Raman scattering efficiency, which typically scales with the fourth power of the optical frequency.
• However, the simplest and cheapest laser solutions are available for longer wavelengths, e.g. in the near infrared. It is often necessary to convert the light to shorter wavelengths with methods of nonlinear frequency conversion, in particular with frequency doubling, frequency tripling or frequency quadrupling. For continuous-wave light, as is commonly used, special measures are required to obtain a reasonably high conversion efficiency. For example, one uses resonant frequency doubling, which typically involves an automatic feedback scheme for maintaining resonance.
• Some samples, such as biological materials, can be damaged by light at short wavelengths.
• Short wavelengths, especially in the ultraviolet spectral regions, can cause safety and handling issues.
• The laser light may induce disturbing fluorescence in samples, and the resulting fluorescence background, which can severely limit the detection sensitivity achieved, is normally stronger for shorter laser wavelengths, and is usually stronger for wavelengths in certain (material-specific) regions.
• Available spectrometers and additional spectral filters work best in certain spectral regions.
• Resonance Raman spectroscopy requires a laser wavelength close to an absorption transition of the investigated medium.

Since such details can vary greatly from one application to another, a wide range of laser wavelengths from the infrared to the visible to the ultraviolet are used for Raman spectroscopy.

The spectral resolution achieved is limited by the laser's linewidth, i.e., by the width of the optical spectrum. Therefore, one usually uses narrow-linewidth lasers, emitting quasi-monochromatic light. The maximum allowable linewidth depends very much on the application. In spectroscopy, it is often given in terms of a spectroscopic wavenumber with units of inverse centimeters (cm−1). Multiplying that quantity by the vacuum velocity of light gives the linewidth in terms of optical frequency. For example, if the linewidth limit is 1 cm−1, that corresponds to ≈30 GHz. The conversion of that to a wavelength bandwidth can be done by multiplying with ($\lambda^2 / c$) (using the center wavelength); for example, 1 cm−1 at 1 μm wavelength corresponds to ≈100 pm = 0.1 nm. In some cases, one may require a linewidth much smaller than that.

Output Power

The required optical output power also depends very much on the specific situation, in particular on the investigated substance, its concentration (e.g., in a solution, if it is not a pure material) and Raman cross-sections, and the required sensitivity and measurement time. It can range between a few milliwatts (for measurements on biological samples, for example) and the order of 1 W in some other cases.

Beam Quality

In many cases, the laser's beam quality should be quite high (ideally diffraction-limited), allowing tight focusing of the light on a sample. That is particularly relevant in Raman microscopy, where one also desires to reach a high spatial resolution.

Polarization

The polarization of the laser light is relevant in certain applications, specifically those involving anisotropic materials.

Laser Noise and Stability

Various laser parameters, in particular the center wavelength and output power, should remain rather stable during operation, as otherwise the accuracy and reproducibility of the spectroscopic measurements could be degraded. This is especially relevant when working with weak Raman scatterers, which require longer measurement times.

The impact of laser noise can be compensated to some extent, e.g. by monitoring the power fluctuations and processing the detector signals accordingly.

Types of Lasers Used for Raman Spectroscopy

As explained above, the laser requirements can differ greatly depending on the use case. Therefore, different types of lasers may be used:

• Argon ion lasers have been used frequently in the past because they can provide high output powers at short wavelengths, in the visible or even ultraviolet. However, they are highly inefficient, thus require a lot of electrical power and effective cooling, and have a limited tube lifetime. Therefore, they have been largely replaced by other lasers, in particular with solid-state laser solutions.
• Some other gas lasers, such as helium–neon lasers, operate at lower output power levels and longer wavelengths, but are substantially cheaper to purchase and operate, and have good properties in terms of beam quality, linewidth and laser noise.
• Laser diodes are available with a wide range of emission wavelength, and are very compact and reliable sources. Although high beam quality and a narrow linewidth are more easily achieved at low power levels, there are optimized diode lasers with quite high output power and still high beam quality and narrow linewidth.
• Diode-pumped solid-state lasers are frequently used as they can offer high output powers, good beam quality and narrow linewidth. Frequency-doubled neodymium lasers emitting at 532 nm are often used, also devices emitting in the UV based on frequency tripling or quadrupling.
• Fiber lasers can also produce substantial output powers, and with more flexibility in the output wavelength. There are also fiber sources based on a low-power seed laser (possibly a laser diode) and a fiber amplifier.
• Quantum cascade lasers can be used when tunable mid-infrared radiation is required.

Frequently Asked Questions

What are the key requirements for a Raman spectroscopy laser?

A laser for Raman spectroscopy needs a suitable, stable wavelength, a narrow optical linewidth for high spectral resolution, sufficient and stable output power, and often a high beam quality for tight focusing.

Why is the choice of laser wavelength critical in Raman spectroscopy?

The laser wavelength affects multiple factors. Short wavelengths yield stronger Raman signals but can cause sample damage or unwanted fluorescence. The choice also depends on the availability of suitable lasers, detectors, and filters.

Why do lasers for Raman spectroscopy need a narrow linewidth?

A narrow linewidth is crucial because it directly limits the spectral resolution of the Raman measurement. A laser with a narrow linewidth emits quasi-monochromatic light, which is necessary to resolve the fine spectral features of the sample.

Which types of lasers are typically used for Raman spectroscopy?

How much laser power is needed for Raman spectroscopy?

The required power depends heavily on the application, ranging from a few milliwatts for delicate biological samples to one watt or more for less sensitive materials or when high-speed measurements are needed.

Suppliers

Sponsored content: The RP Photonics Buyer's Guide contains 19 suppliers for lasers for Raman spectroscopy. Among them:

⚙ hardware

Cobolt lasers offer the world’s broadest range of compact lasers perfectly suited for high resolution Raman spectroscopy applications. The stable single-frequency operation, combined with the ultra-robust thermo-mechanical architecture of HTCure , provides narrow linewidths (<1 MHz for all DPLs) over a large range of operating temperatures. It comes with an extremely low spectral drift (<1 pm) and a spectral purity guaranteed to be better than 80 dB (typically much better). This allows for a very high-resolution Raman spectroscopy and a possibility to detect low frequency Raman signals even down in the THz regime.

Here are specific Cobolt lasers for Raman:

• The Cobolt 04-01 Series lasers are continuous-wave diode-pumped lasers (DPL) operating at a fixed wavelength between 457 nm and 1064 nm. Single frequency operation provides an ultra-narrow spectral linewidth, long coherence length and excellent spectral purity. The lasers are designed and manufactured to ensure a high level of reliability.
• The Cobolt 05-01 Series lasers are continuous-wave diode pumped lasers (DPL) operating at a fixed wavelength between 320 nm and 1064 nm. The single frequency operation provides an ultra-narrow spectral linewidth, long coherence length and excellent spectral purity. All control electronics are contained in the laser head eliminating the need for an external controller and bringing the trusted laser performance of Cobolt 05-01 Series into a compact, self-contained device.
• The Cobolt 08-01 Series is a family of compact narrow linewidth continuous-wave lasers, including high performance single frequency diode pumped lasers (DPL) as well as frequency stabilized diode lasers (NLD). This Series offers the broadest wavelength range and highest performance lasers on the market for Raman spectroscopy.

⚙ hardware

Innolume offers a complete portfolio of laser diode solutions for Raman spectroscopy at 785 nm, 830 nm, 976 nm, and 1064 nm:

• Distributed Feedback (DFB) lasers: single-frequency emission with narrow linewidth (~1 MHz), <0.1 nm tuning precision, and SMSR up to 55 dB, delivering high spectral purity ideal for high-resolution Raman systems
• Fiber Bragg Grating (FBG) lasers: high output power up to 500 mW, wavelength accuracy of ±0.15 nm, and customizable spectral bandwidths from 0.02 nm to 3 nm, ensuring precise control and long-term spectral stability
• Fabry–Pérot (FP): a cost-effective option with high output power for applications where broader spectral width is acceptable

All laser types are available in fiber-coupled formats, with flexible integration options to support a wide range of Raman spectroscopy requirements.

⚙ hardware

Single-frequency lasers and ultrafast fiber lasers for Raman Spectroscopy:

• identify molecules using their chemical fingerprint
• study vibrational, rotational and other low-frequency modes
• based on inelastic (Raman) scattering of monochromatic light
• requires low-noise single-frequency lasers or ultrafast fiber lasers

Most recently, upcoming time-resolved Raman spectroscopy and microscopy application (i.e., measurements on airplane engine exhausts to optimize the combustion process and reduce fuel consumption) trigger the need for pulsed laser sources operating in the femto- and picosecond regime. This demand is covered by the FemtoFiber laser family, which have already proven its outstanding performance and suitability in various broadband CARS and SRS applications.

Questions and Comments from Users

Here you can submit questions and comments. As far as they get accepted by the author, they will appear above this paragraph together with the author’s answer. The author will decide on acceptance based on certain criteria. Essentially, the issue must be of sufficiently broad interest.

Please do not enter personal data here. (See also our privacy declaration.) If you wish to receive personal feedback or consultancy from the author, please contact him, e.g. via e-mail.

By submitting the information, you give your consent to the potential publication of your inputs on our website according to our rules. (If you later retract your consent, we will delete those inputs.) As your inputs are first reviewed by the author, they may be published with some delay.