nonlinear absorption (original) (raw)

Author: the photonics expert (RP)

Definition: absorption where the absorption coefficient depends on the optical intensity

Category: article belongs to category nonlinear optics nonlinear optics

Related: absorptiontwo-photon absorptionmultiphoton absorptionsaturable absorbers

Opposite term: linear absorption

Page views in 12 months: 1248

DOI: 10.61835/xmx Cite the article: BibTex BibLaTex plain textHTML Link to this page! LinkedIn

Content quality and neutrality are maintained according to our editorial policy.

Contents

What is Nonlinear Absorption?

In various situations, absorption processes are nonlinear; this means that the absorption coefficient depends on the optical intensity (radiant flux) — either only on the instantaneous intensity (for an instantaneous nonlinear response) or on the intensities in the near past.

In some cases, there is only nonlinear absorption and no linear absorption: the absorption coefficient vanishes for vanishing intensities. In other cases, there is absorption at low intensities, but the absorption coefficient rises or is reduced for higher intensities. The latter case (with reduced absorption coefficients for rising intensities) is called saturable absorption. It is often exploited for laser pulse generation by passive mode locking or passive Q-switching.

A typical nonlinear absorption process is two-photon absorption (TPA). Here, the energies of two photons are combined to excite a single electron into a higher state — e.g. above the band gap of a semiconductor. Thus, there can be absorption (at high enough intensities) even when the energy of a single photon is insufficient for getting across the band gap. The effective absorption coefficient is proportional to the optical intensity.

Similarly, there are multiphoton absorption processes involving more than two photons per process. These are relevant, for example, for laser material processing in transparent media such as glasses. The deposition of laser energy is possible only with high peak powers as can be reached in short or ultrashort pulses of light.

Frequently Asked Questions

This FAQ section was generated with AI based on the article content and has been reviewed by the article’s author (RP).

What is nonlinear absorption?

Nonlinear absorption is a process where a material's absorption coefficient depends on the optical intensity of the light passing through it. This can mean absorption increases or decreases at higher intensities.

What is saturable absorption?

Saturable absorption is a type of nonlinear absorption where the absorption of a material decreases at higher light intensities. It is widely used for generating laser pulses via passive mode locking or passive Q-switching.

What is two-photon absorption?

Two-photon absorption (TPA) is a nonlinear process where two photons are absorbed simultaneously to excite an electron to a higher energy state, which is not possible with a single photon. For TPA, the effective absorption coefficient is proportional to the optical intensity.

Where is multiphoton absorption applied?

Questions and Comments from Users

Here you can submit questions and comments. As far as they get accepted by the author, they will appear above this paragraph together with the author’s answer. The author will decide on acceptance based on certain criteria. Essentially, the issue must be of sufficiently broad interest.

Please do not enter personal data here. (See also our privacy declaration.) If you wish to receive personal feedback or consultancy from the author, please contact him, e.g. via e-mail.

By submitting the information, you give your consent to the potential publication of your inputs on our website according to our rules. (If you later retract your consent, we will delete those inputs.) As your inputs are first reviewed by the author, they may be published with some delay.