polarization beam combining (original) (raw)

Definition: a technique for combining two polarized laser beams

Categories: article belongs to category general optics general optics, article belongs to category methods methods

Related: beam combiningcoherent beam combiningbrightnesspolarization of light

Page views in 12 months: 899

DOI: 10.61835/tmc Cite the article: BibTex BibLaTex plain textHTML Link to this page! LinkedIn

Content quality and neutrality are maintained according to our editorial policy.

📦 For purchasing polarization beam combining optics, use the RP Photonics Buyer's Guide — an expert-curated directory for finding all relevant suppliers, which also offers advanced purchasing assistance.

Contents

What is Polarization Beam Combining?

Polarization beam combining (or polarization coupling) is a technique for combining (superimposing) two linearly polarized laser beams with polarization optics. There are actually two substantially different variants of that method:

Incoherent Polarization Combining

The simpler variant is incoherent combining. For example, the output beams of two broad area laser diodes, one being vertically polarized and the other one horizontally polarized, can be sent onto a thin-film polarizer such that one of the beams is reflected, the other one transmitted, and both beams then propagate in the same direction. As a result, one obtains an unpolarized beam having the combined optical power of the input beams (neglecting some parasitic losses) and the same beam quality. Accordingly, the brightness is nearly doubled.

This technique is often used e.g. for end pumping of a solid-state laser with an increased power. It works only if the laser crystal can similarly well absorb pump radiation with both polarization directions. This is the case e.g. for Nd:YAG, but not for Nd:YVO4.

Incoherent polarization beam combining is not repeatable: It requires polarized input beams and leads to an unpolarized output beam. Therefore, it cannot be considered as a method for power scaling in a meaningful sense.

Coherent Polarization Combining

If two mutually coherent beams are polarization combined, it is possible to obtain a linear polarization state for the output. Assuming equal input powers for the two ports, the output polarization will be rotated by 45° with respect to the polarization direction of any of the input beams. The method is one variant of coherent beam combining.

Due to the linear output polarization, coherent polarization combining can be repeated many times. It is thus in principle a technique suitable for power scaling.

Suppliers

Questions and Comments from Users

Here you can submit questions and comments. As far as they get accepted by the author, they will appear above this paragraph together with the author’s answer. The author will decide on acceptance based on certain criteria. Essentially, the issue must be of sufficiently broad interest.

Please do not enter personal data here. (See also our privacy declaration.) If you wish to receive personal feedback or consultancy from the author, please contact him, e.g. via e-mail.

By submitting the information, you give your consent to the potential publication of your inputs on our website according to our rules. (If you later retract your consent, we will delete those inputs.) As your inputs are first reviewed by the author, they may be published with some delay.