time–bandwidth product (original) (raw)

Author: the photonics expert (RP)

Acronym: TBP

Definition: product of temporal and spectral width of a pulse

Alternative term: duration–bandwidth product

Category: article belongs to category light pulses light pulses

Units: (dimensionless number)

Page views in 12 months: 8945

DOI: 10.61835/bfb Cite the article: BibTex BibLaTex plain text HTML Link to this page! LinkedIn

Content quality and neutrality are maintained according to our editorial policy.

What is the Time–bandwidth Product?

The time–bandwidth product of a light pulse is the product of its temporal duration and spectral width — in other words, the product of its width in the time and frequency domain. In ultrafast laser physics, it is common to specify the full width at half-maximum (FWHM) in both time and frequency domain. The minimum possible time–bandwidth product is obtained for bandwidth-limited pulses. For example, it is ≈ 0.315 for bandwidth-limited sech2-shaped pulses and ≈ 0.44 for Gaussian-shaped pulses. This means that for a given spectral width, there is a lower limit for the pulse duration. This limitation is essentially a property of the Fourier transform. Although it is certainly not a quantum effect, and also holds for a purely classical description of light, it is mathematically similar to the time–energy uncertainty principle in quantum mechanics.

The time–bandwidth product (also sometimes called duration–bandwidth product) is often used for indicating how close a pulse is to the transform limit, i.e., how close the pulse duration is to the limit which is set by its spectral width. This is an aspect of “pulse quality”; bandwidth-limited pulses have the minimum possible time–bandwidth product (somewhat below 0.5), whereas chirped pulses have larger values. Many mode-locked lasers can generate nearly bandwidth-limited pulses, particularly when they are based on soliton mode locking, although some are generating substantially chirped pulses.

Note that some pulses have a temporal and/or spectral pedestal which is much broader than its FWHM; that is essentially ignored when specifying the TBP based on the FWHM duration and spectral width, although a pedestal can also be an important aspect of (degraded) pulse quality. In order to better take that aspect into account, an alternative definition e.g. based on the second moment of power vs. time and power spectral density vs. frequency may be used, but that is not common in laser physics and technology.

Questions and Comments from Users

Here you can submit questions and comments. As far as they get accepted by the author, they will appear above this paragraph together with the author’s answer. The author will decide on acceptance based on certain criteria. Essentially, the issue must be of sufficiently broad interest.

Please do not enter personal data here. (See also our privacy declaration.) If you wish to receive personal feedback or consultancy from the author, please contact him, e.g. via e-mail.

By submitting the information, you give your consent to the potential publication of your inputs on our website according to our rules. (If you later retract your consent, we will delete those inputs.) As your inputs are first reviewed by the author, they may be published with some delay.