How to (Safely) Train to Failure to Boost Your Intensity and Muscle Mass (original) (raw)

When you’re new to the gym, it seems like all you have to do to gain muscle and get stronger is look at a dumbbell. But the more experience you get under your weightlifting belt, the harder it can be to push your body to the edge you need to continue making progress. Do you have to spend countless hours that you just don’t have in your schedule at the gym to keep the gains coming? Well, you can. But you don’t have to.

This is where methods like training to failure come in. You’ll increase your training intensity so that your muscles start giving out during the last rep of your set. This doesn’t mean that you’re cursed to an eternity of monotonous biceps curls until your muscles finally surrender. Sometimes, you’ll approach failure by using really heavy weights. Other times, it’ll mean tempo training with just your bodyweight.

A person wearing a tank top grimaces as they perform dumbbell preacher curls.

Credit: Mariobalsecar / Shutterstock

Whatever intensity-boosting method you choose, training to failure helps you accumulate more muscle damage so that you can build more muscle. It’s not effective for everyone — beginners, we’re looking at you. But for lifters with experience, flirting with some missed reps might be the burst of new lift your program needs. When you like to live your training life on the edge, it helps to know how to chase your thrills — and your gains — safely and sustainably.

Editor’s note: The content on BarBend is meant to be informative in nature, but it shouldn’t take the place of advice and/or supervision from a medical professional. The opinions and articles on this site are not intended for use as diagnosis, prevention, and/or treatment of health problems. Speak with your physician if you have any concerns.

What is Training to Failure?

Training to failure refers to working so hard during your set that you struggle to complete the last rep. This might mean using a heavy enough weight to make your muscles want to quit in the five to 12 rep range. Or — if you’re training with light weights or with just your bodyweight — it means performing enough reps or manipulating the intensity so you hit failure in the 15 to 30 rep range.

If you’re thinking of using this method to increase your max strength, you might be out of luck. Training to failure doesn’t seem to make you stronger than submaximal work, especially when you keep the overall volume the same. (1)(2)(3) But that doesn’t mean that the cacophony of support for failure is an echo chamber of lies — because building max strength isn’t the only goal out there.

A person wearing a tank top yells in exertion as they hold a loaded barbell on their back.

Credit: Jacob Lund / Shutterstock

If you don’t have access to heavy weights or need a break from using them, training to failure with light weights can help you gain muscle. Hitting failure with lighter weights (as low as 30 to 50 percent of your one-rep max) can elicit similar levels of muscle growth as training with 70 to 80 percent of your max. (4) At least in part, this may be because hitting up against failure in training causes significantly more muscle damage than stopping before your muscles force you to. (5)

If you decide that the sweet sensation of failure is something you want to integrate into your workout program, you’ve got to make sure you’re doing it safely. You’re already increasing the damage you’ll do to your muscles — which is one of the main points of this methodology — so you want to make sure you’re not dramatically increasing your risk of injury along with it.

Practice Lifting Safety

First and foremost, if you’re going to make a goal of failing or nearly failing your last rep of the set, know how to keep yourself safe. The best way to do this is by using a spotter who knows how to spot your lifts safely. If that’s not available to you, learn how to miss lifts safely.

One person spots another while they perform an incline dumbbell bench press.

Credit: MDV Edwards / Shutterstock

To help you do this without your floor preservation instincts kicking in too intensely, try to only use weights on a weight-safe surface. No access to the luxury of gym mats? Try to have a soft surface available to drop weights onto if need be. You can also restrict your failure training to bodyweight-only work so there are no external loads to worry about.

Program Responsibly

When you decide to ramp up your intensity with some good old-fashioned failure, you have to program it just right. To avoid overtraining, make sure you’re cycling failure-oriented programming so it’s not all you’re doing for weeks on end. (1) Instead, choose only one method of training to failure per four to six week cycle.

For example, you might move through four microcycles, each of which are four weeks long. You’ll only take one aspect of your training to failure during each cycle.

During each cycle, make sure the rest of your training remains the same — you should only be taking the indicated part of your program to failure. You’ll also want to make sure your recovery stays on point.

Mix Up Your Strategy

Approaching failure isn’t all about slapping more plates onto the bar. It’s also not about using a light weight and pushing through endless boredom until you’re finally hit a point of immense fatigue. You don’t have to choose between risking a quick and dirty form breakdown with irresponsibly heavy weights or endless, monotonous reps with light weight. You can get a lot more creative than that.

Try varying up your sets to failure with tempo training, pause reps, and drop sets. With tempo training, you’ll be spending longer periods of time in the eccentric portions of your lifts. Similarly, pause reps will force your body to maintain tension and muscle contractions isometrically at the toughest points of your lifts. Drop sets will have you complete a heavy set to failure, immediately drop weight, hit failure again, and repeat. All of these methods increase your time under tension — in and of itself, that added time will spur more muscle growth.

A shirtless person grimaces in exertion as they hold a loaded barbell at the top of a deadlift.

Credit: Paul Aiken / Shutterstock

Combining these strategies with the intention to continue until your form gives out will help you get there with fewer reps. This will help you fail without boring yourself away from success or crushing yourself under heavy weights.

[Read More: The Most Effective Workout Splits, Created by Our Experts]

Recover Adequately

Because training to failure causes a lot of muscle damage, you’ll need more time to recover than when you’re training less intensely. (6) Since you’re going to cause your muscles so much damage and your system so much fatigue, make sure you’re getting enough sleep. This will help your body repair the damage faster and help keep you from overtraining. You’ll also have to make sure you’re eating enough to keep your body fueled during and after sessions. If muscle gain is your reason for hitting failure, you’ll need to be focusing on eating for mass anyway.

Strategies for Training to Failure

Once you’re confident you can program failure training safely, it’s time to figure out how to get your body to its max capacity. Failure is not necessarily about loading up the heaviest weight you can find and going until you force yourself to bail out. You want to be as strategic as possible about your failure training, which means implementing different methods for pushing yourself to the limits. The good news is, this means you can get yourself to failure in a lot of different ways.

Tempo Training

Tempo training is a method to dramatically increase your time under tension and help you put more emphasis on the eccentric portions of your lift. Since you can move more weight in the eccentric phase than you can concentrically, you can often lift heavier — and reach failure faster — with this method.

You’ll see tempo training indicated with four numbers — for example, 3-1-1-0. The first number is for the number of seconds to spend on the eccentric portion of a lift, like the descent of your squat. Then the second number is the seconds at the bottom of your lift (the hole of your squat). The third number is for the concentric, or up, portion of your lift (rising back to standing from the hole). Finally, the last number is how long you should hold at the top (standing in your squat) before diving into the next rep.

1 ½ Reps

Training one and a half reps is a brutal way to push your body toward failure. It’s a pretty simple concept. Complete one rep of your exercise — say, a full push-up. Then perform a half rep — so, descending to the halfway point of your push-up and coming back up. That entire thing counts as one rep. Whether you’re using a barbell or your bodyweight, the fatigue will accumulate very quickly.

Pause Reps

Deploy pause reps when you want to get to failure faster and iron out a particular sticking point in a lift. Do you tend to fail your bench press off your chest? Pause for three to five seconds at the bottom of your bench to strengthen that position — and get yourself to failure. Tend to fail at lockout? Pause with your elbows at 90 degrees to target that position and overload your body with fewer reps.

Speed Reps

Performing speed reps are reps performed with excellent form but very quickly. True to form, they will work your muscles to failure very quickly. You’ll be approaching a plyometric training style here, because you’ll be generating a lot of force in a short amount of time — over and over again. If you really want to raise the stakes — and your fatigue — combine speed reps with pause reps for maximum failure.

Drop Sets

Drop sets are the intensity booster you’ll love to hate. Start with a heavier weight and perform a set to failure. Immediately drop the weight by 10 to 20 percent and perform another set to failure. Rinse and repeat until you can’t go anymore. Drop sets are an extremely time-efficient form of training to failure. So if you want maximum muscles in itty bitty amounts of time, this strategy can help a whole lot.

Who Should Train to Failure?

As long as you’ve got enough experience lifting, hitting failure can help you grow muscle — even when you have limited access to the training equipment of your dreams.

Athletes With Limited Access to Weights

Whether you’re a competitive strength athlete or an experienced recreational lifter, you might not always have access to the weights you need to keep your intensity up. Maybe you’re on the road traveling with just your bodyweight to work out with. Or you might be working out at home but don’t have access to a wide selection of heavier weights.

A person performs a push-up in a gym.

Credit: TheZAStudio / Shutterstock

If you have experience lifting and need to up the ante without heavy loads, you’ll likely want to add training to failure into your program. When you’ve only got light weights, training to failure can help you build muscle and strength in ways you might not be able to access through less intense rep-set schemes. (7)(4)

[Read More: The Best Budget Home Gym Equipment]

Athletes Chasing Intensity

Looking to get your head in the game to mentally prepare yourself for the rigors of an intense competition? Training to failure might be just what you need. Pushing yourself to the point of momentary failure in each set will make you feel like you’re working harder and will make you a lot more uncomfortable during your sets. (8)

If you’re preparing for a meet that will push you past your limits over the course of more than one rep — say, a CrossFit or strongman event — training to failure can help get you mentally prepped.

Experienced Muscle-Seekers

Got some training time under your belt and looking to pad your gym cred with even more muscle mass? Training to failure might be able to help you gain mass, especially when your body has adapted to other forms of lifting that may not be causing the kind of damage you need to eke out further growth. (7)(4)(5)

This might be especially useful for very advanced lifters for whom it’s tough to continue adding training intensity to your routine. Using tempo training, paused reps, and other methods like speed work can help you push yourself without endless reps or extreme weights.

Who Shouldn’t Train to Failure?

Just because training to failure might be able to help you gain some extra muscle doesn’t mean it’s for everyone. For certain populations of lifters, it might be too risky in terms of injury potential. For others, it may just not be an effective use of your energy.

Beginners

Newcomers chasing those sweet newbie gains might be tempted to push themselves all the way to exhaustion with each set. Make the most of beginner’s progress, right? Well, not necessarily. Training to failure as a beginner may not actually make you any stronger or more muscular than stopping before you hit failure. (9). This suggests that aspiring strength athletes should wait to get more experience in training before embracing failure.

Folks at Increased Injury Risk

Athletes who are recovering from surgery or injuries, elderly athletes, and folks with hypertension will likely want to avoid training to failure. (7) Because this training methodology causes a lot more physiological stress and muscular damage, you’ll want to approach it cautiously if you’re looking to train hard without overstressing your body. (5)

Fail for Success

Maybe you’ve been training for a while and need a new way to increase intensity and stimulate muscle growth. You might not have access to heavy weights. Or you may want to give yourself a new and intense training stimulus. To avoid overtraining, mental burnout, and increased injury risk, only use one method of training to failure at a time. So when you’re ready, choose your fighter, eat enough food, and fail as hard as you can.

References

  1. Davies T, Orr R, Halaki M, Hackett D. Effect of Training Leading to Repetition Failure on Muscular Strength: A Systematic Review and Meta-Analysis. Sports Med. 2016 Apr;46(4):487-502.
  2. Lacerda LT, Marra-Lopes RO, Diniz RCR, Lima FV, Rodrigues SA, Martins-Costa HC, Bemben MG, Chagas MH. Is Performing Repetitions to Failure Less Important Than Volume for Muscle Hypertrophy and Strength? J Strength Cond Res. 2020 May;34(5):1237-1248.
  3. Santanielo, N., Nóbrega, S. R., Scarpelli, M. C., Alvarez, I. F., Otoboni, G. B., Pintanel, L., & Libardi, C. A. (2020). Effect of resistance training to muscle failure vs non-failure on strength, hypertrophy and muscle architecture in trained individuals. Biology of sport, 37(4), 333–341.
  4. Schoenfeld BJ, Peterson MD, Ogborn D, Contreras B, Sonmez GT. Effects of Low- vs. High-Load Resistance Training on Muscle Strength and Hypertrophy in Well-Trained Men. J Strength Cond Res. 2015 Oct;29(10):2954-63.
  5. González-Hernández JM, García-Ramos A, Colomer-Poveda D, Tvarijonaviciute A, Cerón J, Jiménez-Reyes P, Márquez G. Resistance Training to Failure vs. Not to Failure: Acute and Delayed Markers of Mechanical, Neuromuscular, and Biochemical Fatigue. J Strength Cond Res. 2021 Apr 1;35(4):886-893.
  6. Vieira JG, Sardeli AV, Dias MR, Filho JE, Campos Y, Sant’Ana L, Leitão L, Reis V, Wilk M, Novaes J, Vianna J. Effects of Resistance Training to Muscle Failure on Acute Fatigue: A Systematic Review and Meta-Analysis. Sports Med. 2022 May;52(5):1103-1125.
  7. Nóbrega SR, Libardi CA. Is Resistance Training to Muscular Failure Necessary? Front Physiol. 2016 Jan 29;7:10.
  8. Santos WDND, Vieira CA, Bottaro M, Nunes VA, Ramirez-Campillo R, Steele J, Fisher JP, Gentil P. Resistance Training Performed to Failure or Not to Failure Results in Similar Total Volume, but With Different Fatigue and Discomfort Levels. J Strength Cond Res. 2021 May 1;35(5):1372-1379.
  9. Lacerda, Lucas T.1; Marra-Lopes, Rodrigo O.1; Diniz, Rodrigo C.R.1; Lima, Fernando V.1; Rodrigues, Sara A.1; Martins-Costa, Hugo C.1,2; Bemben, Michael G.3; Chagas, Mauro H.1 Is Performing Repetitions to Failure Less Important Than Volume for Muscle Hypertrophy and Strength?, Journal of Strength and Conditioning Research: 2020 May 34(5): 1237-1248.

Featured Image: Mariobalsecar / Shutterstock