K. Buffinton | Bucknell University (original) (raw)

Uploads

Papers by K. Buffinton

Research paper thumbnail of A MATLAB framework for efficient gait creation

2011 IEEE/RSJ International Conference on Intelligent Robots and Systems, 2011

Research paper thumbnail of The Yobotics-IHMC Lower Body Humanoid Robot

Research paper thumbnail of Comparison of cost functions for electrically driven running robots

2012 IEEE International Conference on Robotics and Automation, 2012

ABSTRACT In this work we apply optimal control to create running gaits for the model of an electr... more ABSTRACT In this work we apply optimal control to create running gaits for the model of an electrically driven one legged hopper, and compare the results obtained for five different objective functions. By using high compliant series elastic actuators, the motions of joint and motor are decoupled, which allows the exploitation of natural dynamics. Depending on the cost function, this exploitation varies. Energy is injected at different points of time, the amplitude of actuator action changes significantly, and the optimal gear ratios differ by a factor of two. Variations are, however, comparable over a wide range of hopping heights and running velocities. Purely force-based cost functions prove to be ill-suited for such non-conservative systems, and it is shown that thermal electrical losses, in contrast to common belief, do not dominate energy expenditure. The numerical results are corroborated by detailed analytical considerations which give general insights into optimal excitation with electric actuators.

Research paper thumbnail of Energetics of passivity-based running with high-compliance series elastic actuation

International Journal of Mechatronics and Manufacturing Systems, 2012

Research paper thumbnail of Stability Analysis of Passive Dynamic Walking of Quadrupeds

The International Journal of Robotics Research, 2010

ABSTRACT We introduce a detailed numerical simulation and analysis framework to extend the princi... more ABSTRACT We introduce a detailed numerical simulation and analysis framework to extend the principles of passive dynamic walking to quadrupedal locomotion. Non-linear limit cycle methods are used to identify possible gaits and to analyze the stability and efficiency of quadrupedal passive dynamic walking. In doing so, special attention is paid to issues that are inherent to quadrupedal locomotion, such as the occurrence of simultaneous contact collisions and the implications of the phase difference between front and back leg pairs. Limit cycles identified within this framework correspond to periodic gaits and can be placed into two categories: in-phase gaits in which front and back legs hit the ground at roughly the same time, and out-of-phase gaits with a ±90° phase shift between the back and front leg pairs. The latter are, in comparison, energetically more efficient but exhibit one unstable eigenvalue that leads to a phase divergence and results in a gait-transition to a less efficient in-phase gait. A detailed analysis examines the influence of various parameters on stability and locomotion speed, with the ultimate goal of determining a stable solution for the energy-efficient, out-of-phase gait. This was achieved through the use of a wobbling mass, i.e. an additional mass that is elastically attached to the main body of the quadruped. The methods, results, and gaits presented in this paper additionally provide a point of departure for the exploration of the considerably richer range of quadrupedal locomotion found in nature.

Research paper thumbnail of A MATLAB framework for efficient gait creation

2011 IEEE/RSJ International Conference on Intelligent Robots and Systems, 2011

Research paper thumbnail of The Yobotics-IHMC Lower Body Humanoid Robot

Research paper thumbnail of Comparison of cost functions for electrically driven running robots

2012 IEEE International Conference on Robotics and Automation, 2012

ABSTRACT In this work we apply optimal control to create running gaits for the model of an electr... more ABSTRACT In this work we apply optimal control to create running gaits for the model of an electrically driven one legged hopper, and compare the results obtained for five different objective functions. By using high compliant series elastic actuators, the motions of joint and motor are decoupled, which allows the exploitation of natural dynamics. Depending on the cost function, this exploitation varies. Energy is injected at different points of time, the amplitude of actuator action changes significantly, and the optimal gear ratios differ by a factor of two. Variations are, however, comparable over a wide range of hopping heights and running velocities. Purely force-based cost functions prove to be ill-suited for such non-conservative systems, and it is shown that thermal electrical losses, in contrast to common belief, do not dominate energy expenditure. The numerical results are corroborated by detailed analytical considerations which give general insights into optimal excitation with electric actuators.

Research paper thumbnail of Energetics of passivity-based running with high-compliance series elastic actuation

International Journal of Mechatronics and Manufacturing Systems, 2012

Research paper thumbnail of Stability Analysis of Passive Dynamic Walking of Quadrupeds

The International Journal of Robotics Research, 2010

ABSTRACT We introduce a detailed numerical simulation and analysis framework to extend the princi... more ABSTRACT We introduce a detailed numerical simulation and analysis framework to extend the principles of passive dynamic walking to quadrupedal locomotion. Non-linear limit cycle methods are used to identify possible gaits and to analyze the stability and efficiency of quadrupedal passive dynamic walking. In doing so, special attention is paid to issues that are inherent to quadrupedal locomotion, such as the occurrence of simultaneous contact collisions and the implications of the phase difference between front and back leg pairs. Limit cycles identified within this framework correspond to periodic gaits and can be placed into two categories: in-phase gaits in which front and back legs hit the ground at roughly the same time, and out-of-phase gaits with a ±90° phase shift between the back and front leg pairs. The latter are, in comparison, energetically more efficient but exhibit one unstable eigenvalue that leads to a phase divergence and results in a gait-transition to a less efficient in-phase gait. A detailed analysis examines the influence of various parameters on stability and locomotion speed, with the ultimate goal of determining a stable solution for the energy-efficient, out-of-phase gait. This was achieved through the use of a wobbling mass, i.e. an additional mass that is elastically attached to the main body of the quadruped. The methods, results, and gaits presented in this paper additionally provide a point of departure for the exploration of the considerably richer range of quadrupedal locomotion found in nature.

Log In