ListBuckets - Amazon Simple Storage Service (original) (raw)
Important
End of support notice: Beginning October 1, 2025, Amazon S3 will stop returning DisplayName. Update your applications to use canonical IDs (unique identifier for AWS accounts), AWS account ID (12 digit identifier) or IAM ARNs (full resource naming) as a direct replacement of DisplayName.
Between July 1, 2025 and October 1, 2025, you will begin to see an increasing rate of missing DisplayName in the Owner object.
This change affects the following AWS Regions: US East (N. Virginia) Region, US West (N. California) Region, US West (Oregon) Region, Asia Pacific (Singapore) Region, Asia Pacific (Sydney) Region, Asia Pacific (Tokyo) Region, Europe (Ireland) Region, and South America (São Paulo) Region.
Note
This operation is not supported for directory buckets.
Returns a list of all buckets owned by the authenticated sender of the request. To grant IAM permission to use this operation, you must add the s3:ListAllMyBuckets policy action.
For information about Amazon S3 buckets, see Creating, configuring, and working with Amazon S3 buckets.
Important
We strongly recommend using only paginated ListBuckets requests. Unpaginated ListBuckets requests are only supported for AWS accounts set to the default general purpose bucket quota of 10,000. If you have an approved general purpose bucket quota above 10,000, you must send paginated ListBuckets requests to list your account’s buckets. All unpaginated ListBuckets requests will be rejected for AWS accounts with a general purpose bucket quota greater than 10,000.
Request Syntax
GET /?bucket-region=BucketRegion&continuation-token=ContinuationToken&max-buckets=MaxBuckets&prefix=Prefix HTTP/1.1
Host: s3.amazonaws.com
URI Request Parameters
The request uses the following URI parameters.
Limits the response to buckets that are located in the specified AWS Region. The AWS Region must be expressed according to the AWS Region code, such as us-west-2 for the US West (Oregon) Region. For a list of the valid values for all of the AWS Regions, see Regions and Endpoints.
Note
Requests made to a Regional endpoint that is different from thebucket-region parameter are not supported. For example, if you want to limit the response to your buckets in Region us-west-2, the request must be made to an endpoint in Region us-west-2.
ContinuationToken indicates to Amazon S3 that the list is being continued on this bucket with a token. ContinuationToken is obfuscated and is not a real key. You can use this ContinuationToken for pagination of the list results.
Length Constraints: Minimum length of 0. Maximum length of 1024.
Required: No.
Note
If you specify the bucket-region, prefix, or continuation-token query parameters without using max-buckets to set the maximum number of buckets returned in the response, Amazon S3 applies a default page size of 10,000 and provides a continuation token if there are more buckets.
Maximum number of buckets to be returned in response. When the number is more than the count of buckets that are owned by an AWS account, return all the buckets in response.
Valid Range: Minimum value of 1. Maximum value of 10000.
Limits the response to bucket names that begin with the specified bucket name prefix.
Request Body
The request does not have a request body.
Response Syntax
HTTP/1.1 200
<?xml version="1.0" encoding="UTF-8"?>
<ListAllMyBucketsResult>
<Buckets>
<Bucket>
<BucketRegion>string</BucketRegion>
<CreationDate>timestamp</CreationDate>
<Name>string</Name>
</Bucket>
</Buckets>
<Owner>
<DisplayName>string</DisplayName>
<ID>string</ID>
</Owner>
<ContinuationToken>string</ContinuationToken>
<Prefix>string</Prefix>
</ListAllMyBucketsResult>Response Elements
If the action is successful, the service sends back an HTTP 200 response.
The following data is returned in XML format by the service.
Root level tag for the ListAllMyBucketsResult parameters.
Required: Yes
The list of buckets owned by the requester.
Type: Array of Bucket data types
ContinuationToken is included in the response when there are more buckets that can be listed with pagination. The next ListBuckets request to Amazon S3 can be continued with this ContinuationToken. ContinuationToken is obfuscated and is not a real bucket.
Type: String
The owner of the buckets listed.
Type: Owner data type
If Prefix was sent with the request, it is included in the response.
All bucket names in the response begin with the specified bucket name prefix.
Type: String
Examples
Example 1: Unpaginated ListBuckets request
This example lists all the buckets in your account in a single unpaginated response. Unpaginated requests are only supported for AWS accounts that have the default service quota of 10,000 buckets. If you have an approved general purpose bucket quota that is greater than 10,000 buckets, all unpaginated requests will be rejected for your account.
GET / host:s3.us-east-2.amazonaws.com HTTP/1.1
HTTP/1.1 200 OK
<ListAllMyBucketsResult>
<Buckets>
<Bucket>
<CreationDate>2019-12-11T23:32:47+00:00</CreationDate>
<Name>amzn-s3-demo-bucket</Name>
</Bucket>
<Bucket>
<CreationDate>2019-11-10T23:32:13+00:00</CreationDate>
<Name>amzn-s3-demo-bucket1</Name>
</Bucket>
</Buckets>
<Owner>
<DisplayName>Account+Name</DisplayName>
<ID>AIDACKCEVSQ6C2EXAMPLE</ID>
</Owner>
</ListAllMyBucketsResult>
Example 2: Paginated ListBuckets request
The following example request lists all buckets in your account using pagination. It gets the first page of results with the page size set to 1000 buckets. The response returns a ContinuationToken that is used in Example 3 to list the next 1000 buckets.
GET /?max-buckets=1000&host:s3.us-east-2.amazonaws.com HTTP/1.1
HTTP/1.1 200 OK
<ListAllMyBucketsResult>
<Buckets>
<Bucket>
<CreationDate>2024-11-14T23:32:47+00:00</CreationDate>
<Name>amzn-s3-demo-bucket</Name>
<BucketRegion>us-east-1</BucketRegion>
</Bucket>
<Bucket>
<CreationDate>2024-11-14T23:32:13+00:00</CreationDate>
<Name>amzn-s3-demo-bucket1</Name>
<BucketRegion>us-east-2</BucketRegion>
</Bucket>
</Buckets>
<Owner>
<DisplayName>Account+Name</DisplayName>
<ID>AIDACKCEVSQ6C2EXAMPLE</ID>
</Owner>
<ContinuationToken>eyJNYXJrZXIiOiBudWxsLCAiYm90b190cnVuY2F0ZV9hbW91bnQiOiAxfQ==</ContinuationToken>
</ListAllMyBucketsResult>
Example 3: Paginated ListBuckets request with continuation token
This example request uses the token returned in Example 2 to return the next 1000 buckets. Continue until there are no more results. If you do not receive a continuation token with your initial paginated ListBuckets request, then your single paginated request returned all of the buckets in your account.
GET /?max-buckets=1000&continuation-token=eyJNYXJrZXIiOiBudWxsLCAiYm90b190cnVuY2F0ZV9hbW91bnQiOiAxfQ== host:s3.us-east-2.amazonaws.com HTTP/1.1
HTTP/1.1 200 OK
<ListAllMyBucketsResult>
<Buckets>
<Bucket>
<CreationDate>2024-11-14T23:32:47+00:00</CreationDate>
<Name>amzn-s3-demo-bucket</Name>
<BucketRegion>us-east-1</BucketRegion>
</Bucket>
<Bucket>
<CreationDate>2024-11-14T23:32:13+00:00</CreationDate>
<Name>amzn-s3-demo-bucket1</Name>
<BucketRegion>us-east-2</BucketRegion>
</Bucket>
</Buckets>
<Owner>
<DisplayName>Account+Name</DisplayName>
<ID>AIDACKCEVSQ6C2EXAMPLE</ID>
</Owner>
<ContinuationToken>eyJOZXh0VG9rZW4iOiBudWxsLCAiYm90b190cnVuY2F0ZV9hbW91bnQiEXAMPLE=</ContinuationToken>
</ListAllMyBucketsResult>
Example 4: Paginated ListBuckets request for buckets in US East (Ohio) (us-east-2)
The following example lists all the buckets in your account in theus-east-2 Region. The first paginated response will return up to 1000 buckets. Requests made to a Regional endpoint that is different from the bucket-region parameter are not supported.
GET /?bucket-region=us-east-2&max-buckets=1000 host:s3.us-east-2.amazonaws.com HTTP/1.1
HTTP/1.1 200 OK
<ListAllMyBucketsResult>
<Buckets>
<Bucket>
<CreationDate>2024-11-14T23:32:47+00:00</CreationDate>
<Name>DOC-EXAMPLE-BUCKET</Name>
<BucketRegion>us-east-2</BucketRegion>
</Bucket>
<Bucket>
<CreationDate>2024-11-14T23:32:13+00:00</CreationDate>
<Name>DOC-EXAMPLE-BUCKET1002</Name>
<BucketRegion>us-east-2</BucketRegion>
</Bucket>
</Buckets>
<Owner>
<DisplayName>Account+Name</DisplayName>
<ID>AIDACKCEVSQ6C2EXAMPLE</ID>
</Owner>
<ContinuationToken>eyJOZXh0VG9rZW4iOiBudWxsLCAiYm90b190cnVuY2F0ZV9hbW91bnQiEXAMPLEcd =</ContinuationToken>
</ListAllMyBucketsResult>
Example 5: Paginated ListBuckets request for buckets in your account that begin with amzn-s3-demo-bucket in US East (Ohio) (us-east-2)
The following example lists all the buckets in your account located in the us-east-2 Region that begin with the amzn-s3-demo-bucket bucket prefix. This request uses pagination.
GET /?bucket-region=us-east-2&max-buckets=1000&prefix=amzn-s3-demo-bucket host:s3.us-east-2.amazonaws.com HTTP/1.1
HTTP/1.1 200 OK
<ListAllMyBucketsResult>
<Buckets>
<Bucket>
<CreationDate>2024-11-14T23:32:47+00:00</CreationDate>
<Name>amzn-s3-demo-bucket</Name>
<BucketRegion>us-east-2</BucketRegion>
</Bucket>
</Buckets>
<Owner>
<DisplayName>Account+Name</DisplayName>
<ID>AIDACKCEVSQ6C2EXAMPLE</ID>
</Owner>
<Prefix>
amzn-s3-demo-bucket
</Prefix>
<ContinuationToken>eyJOZXh0VG9rZW4iOiBudWxsLCAiYm90b190cnVuY2F0ZV9hbW91bnQiEXAMPLE=</ContinuationToken>
</ListAllMyBucketsResult>
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following: