Substance Information - ECHA (original) (raw)
REACH Registration data can be found in the new ECHA CHEM database. The old ‘Registered substance factsheets’ will be available on this web site during the transition period but have not been updated since 19 May 2023. More
Reaction mass of 3,6-Bis(3-chlorophenyl)-2,5-dihydro-pyrrolo[3,4-c]pyrrole-1,4-dione, 3-(3-Chlorophenyl)-6-(4-chlorophenyl)-2,5-dihydro- pyrrolo[3,4-c]pyrrole-1,4-dione and 3,6-Bis(4-chlorophenyl)-2,5-dihydro-pyrrolo[3,4-c]pyrrole-1,4-dione
Substance identity 
Substance identity
The ‘Substance identity’ section is calculated from substance identification information from all ECHA databases. The substance identifiers displayed in the InfoCard are the best available substance name, EC number, CAS number and/or the molecular and structural formulas.
Some substance identifiers may have been claimed confidential, or may not have been provided, and therefore not be displayed.
EC (European Community) Number
The EC Number is the numerical identifier for substances in the EC Inventory. The EC Inventory is a combination of three independent European lists of substances from the previous EU chemicals regulatory frameworks (EINECS, ELINCS and the NLP-list). More information about the EC Inventory can be found here.
If the substance was not covered by the EC Inventory, ECHA attributes a list number in the same format, starting with the numbers 6, 7, 8 or 9.
The EC or list number is the primary substance identifier used by ECHA.
CAS (Chemical Abstract Service) registry number
The CAS number is the substance numerical identifier assigned by the Chemical Abstracts Service, a division of the American Chemical Society, to substances registered in the CAS registry database. A substance identified primarily by an EC or list number may be linked with more than one CAS number, or with CAS numbers that have been deleted. More information about CAS and the CAS registry can be found here.
Molecular formula
The molecular formula identifies each type of element by its chemical symbol and identifies the number of atoms of each element found in one discrete molecule of the substance. This information is only displayed if the substance is well–defined, its identity is not claimed confidential and there is sufficient information available in ECHA’s databases for ECHA’s algorithms to generate a molecular structure.
Molecular structure
The molecular structure is based on structures generated from information available in ECHA’s databases. If generated, an InChI string will also be generated and made available for searching. This information is only displayed if the substance is well-defined, its identity is not claimed confidential and there is sufficient information available in ECHA’s databases for ECHA’s algorithms to generate a molecular structure.
More help available here.
**EC / List no.: 465-080-5
**CAS no.: -
**Mol. formula:
Hazard classification & labelling Hazard classification and labelling
The ‘Hazard classification and labelling’ section shows the hazards of a substance based on the standardised system of statements and pictograms established under the CLP (Classification Labelling and Packaging) Regulation. The CLP Regulation makes sure that the hazards presented by chemicals are clearly communicated to workers and consumers in the European Union. The CLP Regulation uses the UN Global Harmonised System (GHS) and European Union Specific Hazard Statements (EUH).
This section is based on three sources for information (harmonised classification and labelling (CLH), REACH registrations and CLP notifications). The source of the information is mentioned in the introductory sentence of the hazard statements. When information is available in all sources, the first two are displayed as a priority.
Please note:
The purpose of the information provided under this section is to highlight the substance hazardousness in a readable format. It does not represent a new labelling, classification or hazard statement, neither reflect other factors that affect the susceptibility of the effects described, such as duration of exposure or substance concentration (e.g. in case of consumer and professional uses). Other relevant information includes the following:
- Substances may have impurities and additives that lead to different classifications. If at least one company has indicated that the substance classification is affected by impurities or additives, this will be indicated by an informative sentence. However, substance notifications in the InfoCard are aggregated independently of the impurities and additives.
- Hazard statements were adapted to improve readability and may not correspond textually to the hazard statements codes description in the European Union Specific Hazard Statements (EUH) or the UN Global Harmonised System (GHS).
To see the full list of notified classifications and to get more information on impurities and additives relevant to classification please consult the C&L Inventory.
More information about Classification and Labelling is available in the Regulations section of ECHA website.
More help available here.
Harmonised classification and labelling (CLH)
Harmonised classification and labelling is a legally binding classification and labelling for a substance, agreed at European Community level. Harmonisation is based on the substance’s physical, toxicological and eco-toxicological hazard assessment.
The ‘Hazard classification’ and labelling section uses the signal word, pictogram(s) and hazard statements of the substance under the harmonised classification and labelling (CLH) as its primary source of information.
If the substance is covered by more than one CLH entry (e.g. disodium tetraborate EC no. 215–540–4, is covered by three harmonisations: 005–011–00–4; 005–011–01–1 and 005–011–02–9), CLH information cannot be displayed in the InfoCard as the difference between the CLH classifications requires manual interpretation or verification. If a substance is classified under multiple CLH entries, a link to the C&L Inventory is provided to allow users to view CLH information associated with the substance and no text is automatically generated for the InfoCard.
It is possible that a harmonisation is introduced through an amendment to the CLP Regulation. In that case, the ATP (Adaptation to Technical Progress) number is displayed.
More info on CLH can be found here.
Classification and labelling under REACH
If available, additional information on classification and labelling (C&L) is derived from REACH registration dossiers submitted by industry. This information has not been reviewed or verified by ECHA, and may change without prior notice. REACH registration dossiers have greater data requirements (such as supporting studies) than do notifications under CLP.
Notifications under the Classification Labelling and Packaging (CLP) Regulation
If no EU harmonised classification and labelling exists and the substance was not registered under REACH, information derived from classification and labelling (C&L) notifications to ECHA under CLP Regulation is displayed under this section. These notifications can be provided by manufacturers, importers and downstream users. ECHA maintains the C&L Inventory, but does not review or verify the accuracy of the information.
Note that for readability purposes, only the pictograms, signal words and hazard statements referred in more than 5% of the notifications under CLP are displayed.
Warning! According to the classification provided by companies to ECHA in REACH registrations this substance is harmful if inhaled.
About this substance About this substance
This section provides an overview of the calculated volume at which the substance is manufactured or imported to the European Economic Area (EU28 + Iceland, Liechtenstein and Norway). Additionally, if available, information on the use of the substance and how consumers and workers are likely to be exposed to it can also be displayed here.
The use information is displayed per substance life cycle stage (consumer use, in articles, by professional workers (widespread uses), in formulation or re-packing, at industrial sites or in manufacturing). The information is aggregated from the data coming from REACH substance registrations provided by industry.
For a detailed overview on identified uses and environmental releases, please consult the registered substance factsheet.
Use descriptors are adapted from ECHA guidance to improve readability and may not correspond textually to descriptor codes described in Chapter R.12: Use Descriptor system of ECHA Guidance on information requirements and chemical safety assessment.
The examples provided are generic examples and may not apply to the specific substance you are viewing. A substance may have its use restricted to certain articles or products and therefore not all the examples may apply to the specific substance. Furthermore, some substances can be found in an article, but with unlikely exposure (e.g. inside a watch) or with very low concentrations considered not to pose risks to human health or the environment.
Please note:
For readability purpose, only non-confidential use descriptors occurring in more than 5% of total occurrences are displayed.
The described Product category (i.e. the products in which the substance may be used) may refer to uses as intermediate and under controlled conditions, for which there is no consumer exposure.
More help is available here.
This substance is registered under the REACH Regulation and is manufactured in and / or imported to the European Economic Area, at ≥ 1 tonnes per annum.
This substance is used by consumers, in articles, by professional workers (widespread uses), in formulation or re-packing, at industrial sites and in manufacturing.
Consumer Uses
This substance is used in the following products: coating products, inks and toners and polymers.
Other release to the environment of this substance is likely to occur from: indoor use (e.g. machine wash liquids/detergents, automotive care products, paints and coating or adhesives, fragrances and air fresheners) and outdoor use.
Article service life
Release to the environment of this substance can occur from industrial use: industrial abrasion processing with low release rate (e.g. cutting of textile, cutting, machining or grinding of metal) and of articles where the substances are not intended to be released and where the conditions of use do not promote release.
Other release to the environment of this substance is likely to occur from: outdoor use in long-life materials with low release rate (e.g. metal, wooden and plastic construction and building materials) and indoor use in long-life materials with low release rate (e.g. flooring, furniture, toys, construction materials, curtains, foot-wear, leather products, paper and cardboard products, electronic equipment).
This substance can be found in complex articles, with no release intended: vehicles and machinery, mechanical appliances and electrical/electronic products (e.g. computers, cameras, lamps, refrigerators, washing machines).
This substance can be found in products with material based on: metal (e.g. cutlery, pots, toys, jewellery), plastic (e.g. food packaging and storage, toys, mobile phones), rubber used for large surface area articles (e.g. construction and building materials for flooring), rubber used for toys and other articles intended for children’s use (e.g. baby bottle nipples, soothers), rubber used for packaging (excluding food packaging), rubber used for furniture & furnishings, including furniture coverings, wood used for large surface area articles (e.g. construction and building materials for floors, claddings), wood used for toys and other articles intended for children’s use, wood used for packaging (excluding food packaging) and wood used for furniture & furnishings.
Widespread uses by professional workers
This substance is used in the following products: inks and toners.
ECHA has no public registered data on the types of manufacture using this substance. Other release to the environment of this substance is likely to occur from: indoor use (e.g. machine wash liquids/detergents, automotive care products, paints and coating or adhesives, fragrances and air fresheners) and outdoor use.
Formulation or re-packing
ECHA has no public registered data indicating whether or in which chemical products the substance might be used. Release to the environment of this substance can occur from industrial use: formulation of mixtures and formulation in materials.
Uses at industrial sites
This substance is used in the following products: polymers.
This substance is used in the following areas: printing and recorded media reproduction and formulation of mixtures and/or re-packaging.
Release to the environment of this substance can occur from industrial use: in the production of articles.
Manufacture
Release to the environment of this substance can occur from industrial use: manufacturing of the substance.
Properties of concern Properties of concern
The ‘Properties of concern’ section shows ECHA-assigned graphical indicators for certain substance properties that are regarded as being of relevance or importance to human health and/or the environment based on the information provided to the Agency.
Properties of concern are calculated at four "levels" of certainty:
- "Recognised" - meaning that the concern is indicated in an official source. Recognised concerns are illustrated with a dark red icon. Sources for these are either a Harmonised C&L (CLP Regulation Annex VI) or in the Candidate list of substances of very high concern for authorisation (REACH).
- "Potential" - again comes from official sources only. Potential concerns are illustrated with a light red icon. For (C), (M), and (R) it means that the concern is suspected in a Harmonised C&L (CLP Regulation Annex VI), as Carc. 2, Muta. 2, or Repr. 2. For (PBT) and (ED) Potential means that the concern is under assessment in the PBT or ED assessment list, and the outcome indicates a potential ED. There are no potential (Ss) or (Sr)s.
- "Broad agreement" - comes from data submitted by industry to ECHA, and indicates that the data submitted is aligned, with >= 50% of the data submitters providing the same concern. Broad agreement concerns are illustrated with a solid outlined circle icon.
- "Minority position" - comes from data submitted by industry to ECHA, and indicates that the data submitted is not aligned. > 5% and < 50% of the data submitters have provided the concerns indicated at this "level". Minority position concerns are illustrated with a greyed out circle icon.
The following properties of concern are calculated:
- Carcinogenic (C) – Recognised carcinogen: comes from a harmonised C&L classifying the substance as Carc. 1A or 1B and/or an entry in the Candidate list. Potential carcinogen: comes from a harmonised C&L classifying the substance as a suspected carcinogen Carc.2. Broad agreement: comes from industry data where a majority of data submitters agree the substance is carcinogenic. Minority position: comes from industry data where a minority of data submitters indicate the substance is carcinogenic. More information about carcinogenicity here.
- Mutagenic (M) – Recognised mutagen: comes from a harmonised C&L classifying the substance as Muta. 1A or 1B and/or an entry in the Candidate list. Potential mutagen: comes from a harmonised C&L classifying the substance as a suspected mutagen Muta. 2. Broad agreement: comes from industry data where a majority of data submitters agree the substance is mutagenic. Minority position: comes from industry data where a minority of data submitters indicate the substance is mutagenic. More information about mutagenicity here.
- Toxic to Reproduction (R) – Recognised as toxic to reproduction: comes from a harmonised C&L classifying the substance as Carc. 1A or 1B and/or an entry in the Candidate list. Potentially toxic to reproduction: comes from a harmonised C&L classifying the substance as suspected toxic to reproduction Repr. 2. Broad agreement: comes from industry data where a majority of data submitters agree the substance is toxic to reproduction. Minority position: comes from industry data where a minority of data submitters indicate the substance is toxic to reproduction. More information about reproductive toxicity here.
- Skin sensitising (Ss) – Recognised skin sensitiser: comes from a harmonised C&L classifying the substance as Skin Sens. 1, 1A, or 1B. Broad agreement: comes from industry data where a majority of data submitters agree the substance is a skin sensitiser. Minority position: comes from industry data where a minority of data submitters indicate the substance is skin sensitising. More information about skin sensitiser here.
- Respiratory sensitising (Sr) – Recognised respiratory sensitiser: comes from a harmonised C&L classifying the substance as Resp. Sens. 1, 1A, or 1B and/or an entry in the Candidate list. Broad agreement: comes from industry data where a majority of data submitters agree the substance is a respiratory sensitiser. Minority position: comes from industry data where a minority of data submitters indicate the substance is a respiratory sensitiser. More information about respiratory sensitiser here.
- PBT – Recognised Persistent, bioaccumulative and toxic (PBT) (or vPvB): comes from an entry in the Candidate list. Potential PBT: is shown for substances under assessment, and comes from an entry in the PBT assessment list. Broad agreement: comes from industry data where a majority of data submitters agree the substance is PBT. Minority position: comes from industry data where a minority of data submitters indicate the substance is PBT. More information about persistent, bioaccumulative and toxic substances here.
- ED – Recognised Endocrine Disruptor (ED): comes from an entry in the Candidate list. Potential ED: is shown for substances under assessment, and comes from an entry in the ED assessment list, if the outcome is not final and “Not ED”. At this time there is no industry submitted data taken into account to display an ED property of concern. More information about endocrine disrupting substances here.
- POP – Recognised Persistent Organic Pollutant (POP): comes from an entry in the Annex I, II or III to the POPs Regulation and/or an entry in the Annex A, B or C to the Stockholm Convention. Under assessment as Persistent Organic Pollutant: is shown for substances that have been proposed for their inclusion in the Stockholm Convention and are under assessment, or for which a proposal is under preparation in the European Union. Note that proposals that have been set aside, either before their submission by the EU to the Convention, or by the POP Review Committee are still indicated as "Under assessment as POP".
The substance properties displayed in this section are derived from Harmonised classification and labelling (CLH) data, entries in the Candidate list of substances of very high concern for authorisation, the PBT assessment list, the ED assessment list, REACH registered dossier data and from notifications made under CLP. A prioritisation hierarchy means that data is taken from harmonised C&L data and regulatory lists first, then REACH registrations and finally from CLP notifications. By clicking on the "More details" button you can see the exact origin(s) of each Property of Concern.
Impurities or additives: When a specific critical property is calculated from industry data and where the majority of data submitters have indicated that the property relates to cases containing impurities and/or additives, then the respective critical property icon is modified with an asterisk (*).
| PBT | Under assessment as Persistent, Bioaccumulative and Toxic |
|---|
More details Properties of concern - more details
| Properties of concern | Source(s) | |
|---|---|---|
| PBT | Under assessment as Persistent, Bioaccumulative and Toxic | PBT list |
Nanomaterial form Nanomaterial form The nanomaterials form section indicates those substances known to ECHA to be placed on the EEA market as a nanomaterial. This is based on information derived from REACH registration dossiers, declarations submitted to the French national inventory for nanomaterials, the Belgian national inventory for nanomaterials or to the EU catalogue of nanomaterials used in cosmetics products placed on the market. The identity of the nanomaterials from the French register, the Belgian register and the catalogue of nanomaterials cosmetics was matched to the identity of substances in ECHA’s databases, where a match was possible. As the registration of nanomaterials under these data sources and the registration of substances under REACH have different scopes, it is not possible to have a perfect match in all cases. Note that a registration made under REACH may not specifically cover the same nanoforms of the substances as found in the French inventory, Belgian inventory or the catalogue of nanomaterials used in cosmetics products.
| Substance is known to be on the EEA market in nanomaterial form. |
|---|
How to use it safely How to use it safely
This section provides links to the list of precautions (precautionary statements) and to the guidance on safe use, if they have been provided in REACH registration dossiers.
- Precautionary statements - describe recommended measures to minimise or prevent adverse effects resulting from exposure to a hazardous product or improper storage or handling of a hazardous product.
- Guidance on safe use - recommendations by substance registrant on the proper use of the substance in various situations. Examples include recommended measures on fire-fighting, transport and recycling and disposal.
Please note: Precautionary measures and guidance on safe use concern the use and handling of the specific substance as such, not of the presence of the substance in other articles or mixtures. The precautionary measures and guidance on safe use are as submitted to ECHA by registrants under the REACH Regulation. Information on precautionary measures and the safe use is submitted by the registrant of a substance and the registrant is solely responsible for its accuracy and completeness.
More help available here.
- ECHA has no data from registration dossiers on the precautionary measures for using this substance.
- Guidance on the safe use of the substance provided by manufacturers and importers of this substance.
about INFOCARD - Last updated: 04/10/2024 InfoCard
The InfoCard summarises the non-confidential data of a substance held in the databases of the European Chemicals Agency (ECHA). InfoCards are generated automatically based on the data available at the time of generation.
The quality and correctness of the information submitted to ECHA remains the responsibility of the data submitter. The type of uses and classifications may vary between different submissions to ECHA and for a full understanding it is recommended to consult the source data. Information on applicable regulatory frameworks is also automatically generated and may not be complete or up to date. It is the responsibility of the substance manufacturers and importers to consult official publications, e.g. the electronic edition of the Official Journal of the European Union.
InfoCards are updated when new information is available. The date of the last update corresponds to the publication date of the InfoCard and not necessarily to the date in which the update occurred in the source data.
More help available here.
Regulatory context
Here you can find all of the regulations and regulatory lists in which this substance appears, according to the data available to ECHA. This substance has been found in the following regulatory activities (directly, or inheriting the regulatory context of a parent substance):
- ECHA Legislations
- Occupational Exposure limits (OELs)
- Emission Limit Values (ELVs)
- Other chemical legislations
REACH - Registration, Evaluation, Authorisation and Restriction of Chemicals Regulation
- Tool showing an overview of substances in various key regulatory processes that authorities are working on.
- Substances undergoing a PBT/vPvB assessment.
- Substances which have been registered and can be placed on the EEA market by those companies with a valid registration.
CLP - Classification, Labelling and Packaging
- Substances for which classification and labeling data have been submitted to ECHA in a registration under REACH or notified by manufacturers or importers under CLP. Such notifications are required for hazardous substances, as such or in mixtures, as well as for all substances subject to registration, regardless of their hazard.
EUON - EU Observatory for Nanomaterials
- Substances listed in the EINECS, ELINCS, or NLP inventories.
Substance names and other identifiers
Reaction mass of 3,6-Bis(3-chlorophenyl)-2,5-dihydro-heteromonocycl[3,4-c]heteromonocycl-1,4-dione, 3-(3-Chlorophenyl)-6-(4-chlorophenyl)-2,5-dihydro-heteromonocycl[3,4-c]heteromonocycl-1,4-dione and 3,6-Bis(4-chlorophenyl)-2,5-dihydro-heteromonocycl[3,4-c]heteromonocycl-1,4-dione
Registration dossier
Reaction mass of 3,6-Bis(3-chlorophenyl)-2,5-dihydro-pyrrolo[3,4-c]pyrrole-1,4-dione, 3-(3-Chlorophenyl)-6-(4-chlorophenyl)-2,5-dihydro- pyrrolo[3,4-c]pyrrole-1,4-dione and 3,6-Bis(4-chlorophenyl)-2,5-dihydro-pyrrolo[3,4-c]pyrrole-1,4-dione
C&L Inventory
Irgazin Cosmoray Orange L 2950
Registration dossier