WSL support (original) (raw)

WSL setup

WSL version

Running uname -a from within WSL should report a kernel version of 5.10.60.1 or later. You’ll need to be running a WSL 2 distro.

USB/IP client tools

From within WSL, install the user space tools for USB/IP and a database of USB hardware identifiers. On Ubuntu 20.04 LTS, run these commands:

sudo apt install linux-tools-virtual hwdata sudo update-alternatives --install /usr/local/bin/usbip usbip ls /usr/lib/linux-tools/*/usbip | tail -n1 20

⚠️ These instructions have changed.
Updating to usbipd-win version 2.0.0 or higher will require these new instructions, even if the old instructions were followed before.

ℹ️ Installing package updates.
After installing package updates (e.g. with apt upgrade), you may have to run update-alternatives again to re-enable the usbip command.

ℹ️ Other distributions.
For other distributions a different usbip client package may be required. In any case, make sure that the resulting usbip command is in the PATH for user root; for example by adjusting the above update-alternatives. Please search the (possibly closed) issues to see if instructions for your distribution are already known.

udev

Note that depending on your application, you may need to configure udev rules to allow non-root users to access the device. Rules to enable a device must be in place before connecting the device. As a common example for using embedded devices with openocd copy share/openocd/contrib60-openocd.rules to the /etc/udev/rules.d folder.

After updating your rules run udevadm control --reload. If you get an error that "Failed to send reload request: No such file or directory", run sudo service udev restart then run it again.

WSL convenience commands

After following the setup instructions above and installing usbipd in Windows, you can use the usbipd WSL convenience commands to easily attach devices to a WSL instance and view which distributions devices are attached to.

First ensure a WSL command prompt is open. This will keep the WSL 2 lightweight VM active.

From an administrator command prompt on Windows, run this command. It will list all the USB devices connected to Windows.

usbipd wsl list BUSID DEVICE STATE 1-7 USB Input Device Not attached 4-4 STMicroelectronics STLink dongle, STMic... Not attached 5-2 Surface Ethernet Adapter Not attached

Select the bus ID of the device you’d like to attach to WSL and run this command. You’ll be prompted by WSL for a password to run a sudo command.

usbipd wsl attach --busid 4-4 [sudo] password for user:

Now we can run list again and see the device is shared with WSL.

usbipd wsl list BUSID DEVICE STATE 1-7 USB Input Device Not attached 4-4 STMicroelectronics STLink dongle, STMic... Attached - Ubuntu 5-2 Surface Ethernet Adapter Not attached

From within WSL, run lsusb to list the attached USB devices. You should see the device you just attached and be able to interact with it using normal Linux tools.

$ lsusb Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 0483:374b STMicroelectronics ST-LINK/V2.1 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

wsl detach can be used to stop sharing the device. The device will also automatically stop sharing if it is unplugged or the computer is restarted.

usbipd wsl detach --busid 4-4

usbipd wsl list BUSID DEVICE STATE 1-7 USB Input Device Not attached 4-4 STMicroelectronics STLink dongle, STMic... Not attached 5-2 Surface Ethernet Adapter Not attached

Use the --help to learn more about these convenience commands. In particular, the --distribution and --usbippath options can be useful to customize how the WSL commands are invoked.

Building your own USB/IP enabled WSL 2 kernel

Recent versions of Windows running WSL kernel 5.10.60.1 or later already include support for common scenarios like USB-to-serial adapters and flashing embedded development boards. If you're trying to do one of these tasks on Ubuntu, you can avoid recompiling the kernel by following the WSL Setup instructions at the top of this page. If you require special drivers, you'll need to build your own kernel for WSL 2.

Update WSL:

List your distributions.

Verify that your target distribution is version 2; see WSL documentationfor instructions on how to set the WSL version.

Export current distribution to be able to fall back if something goes wrong.

wsl --export \wsl2-usbip.tar

Import new distribution with current distribution as base.

wsl --import wsl2-usbip \wsl2-usbip.tar

Run new distribution.

wsl --distribution wsl2-usbip --user

Update resources (assuming apt, you may need to use yum or another package manager).

sudo apt update sudo apt upgrade

Install prerequisites.

sudo apt install build-essential flex bison libssl-dev libelf-dev libncurses-dev autoconf libudev-dev libtool

Clone kernel that matches wsl version. To find the version you can run.

The kernel can be found at: https://github.com/microsoft/WSL2-Linux-Kernel

Clone the kernel repo, then checkout the branch/tag that matches your kernel version; run uname -r to find the kernel version.

git clone https://github.com/microsoft/WSL2-Linux-Kernel.git cd WSL2-Linux-Kernel git checkout linux-msft-wsl-5.10.43.3

Copy current configuration file.

cp /proc/config.gz config.gz gunzip config.gz mv config .config

You may need to set CONFIG_USB=y in .config prior to running menuconfig to get all options enabled for selection.

Run menuconfig to select kernel features to add.

These are the necessary additional features in menuconfig.
Device Drivers -> USB Support
Device Drivers -> USB Support -> USB announce new devices
Device Drivers -> USB Support -> USB Modem (CDC ACM) support
Device Drivers -> USB Support -> USB/IP
Device Drivers -> USB Support -> USB/IP -> VHCI HCD
Device Drivers -> USB Support -> USB/IP -> Debug messages for USB/IP
Device Drivers -> USB Serial Converter Support
Device Drivers -> USB Serial Converter Support -> USB FTDI Single port Serial Driver

⚠️ These instructions have changed.
Previously, it was recommended to enable "Debug messages for USB/IP". However, debug messages have a huge negative performance impact on bulk transfers. Enabling debug messages is no longer recommended.

In the following command the number '8' is the number of cores to use; run getconf _NPROCESSORS_ONLN to find the number of cores.

sudo make -j 8 && sudo make modules_install -j 8 && sudo make install -j 8

Build USB/IP tools.

cd tools/usb/usbip sudo ./autogen.sh sudo ./configure sudo make install -j 8

Copy tools libraries location so usbip tools can get them.

sudo cp libsrc/.libs/libusbip.so.0 /lib/libusbip.so.0

Install usb.ids so you have names displayed for usb devices.

sudo apt-get install hwdata

From the root of the repo, copy the image.

cp arch/x86/boot/bzImage /mnt/c/Users//usbip-bzImage

Create a .wslconfig file on /mnt/c/Users/<user>/ and add a reference to the created image with the following.

[wsl2] kernel=c:\users\\usbip-bzImage

Your WSL distro is now ready to use!