][+ emulator in Rust (original) (raw)

  emu6502 0.9.1 (f8379fd591d235ad65f39a6dcf4d137c3b8f0f76)

  USAGE:
      emu6502 [FLAGS] [disk 1] [disk 2]

  FLAGS:
      -h, --help         Prints help information
      -V, --version      Prints version information
      --50hz             Enable 50 Hz emulation
      --nojoystick       Disable joystick
      --xtrim            Set joystick x-trim value
      --ytrim            Set joystick y-trim value
      --swapbuttons      Swap the paddle 0 and paddle 1 buttons
      -r no of pages     Emulate RAMworks III card with 1 to 127 pages
      --rf size          Ramfactor memory size in KB
      -m, --model MODEL  Set apple 2 model.
                         Valid value: apple2p,apple2e,apple2ee,apple2c,apple2c0,
                                      apple2c3,apple2c4,apple2cp
      --d1 PATH          Set the file path for disk 1 drive at Slot 6 Drive 1
      --d2 PATH          Set the file path for disk 2 drive at Slot 6 Drive 2
      --h1 PATH          Set the file path for hard disk 1
      --h2 PATH          Set the file path for hard disk 2
      --s1 device        Device slot 1
                         Value: none,harddisk,mboard,z80,mouse,parallel,ramfactor,
                                diskii,diskii13,saturn
      --s2 device        Device slot 2
                         Value: none,harddisk,mboard,z80,mouse,parallel,ramfactor,
                                diskii,diskii13,saturn
      --s3 device        Device slot 3
                         Value: none,harddisk,mboard,z80,mouse,parallel,ramfactor,
                                diskii,diskii13,saturn
      --s4 device        Device slot 4
                         Value: none,harddisk,mboard,z80,mouse,parallel,ramfactor,
                                diskii,diskii13,saturn
      --s5 device        Device slot 5
                         Value: none,harddisk,mboard,z80,mouse,parallel,ramfactor,
                                diskii,diskii13,saturn
      --s6 device        Device slot 6
                         Value: none,harddisk,mboard,z80,mouse,parallel,ramfactor,
                                diskii,diskii13,saturn
      --s7 device        Device slot 7
                         Value: none,harddisk,mboard,z80,mouse,parallel,ramfactor,
                                diskii,diskii13,saturn
      --weakbit rate     Set the random weakbit error rate (Default is 0.3)
      --opt_timing rate  Override the optimal timing (Default is 32)
      --rgb              Enable RGB mode (Default: RGB mode disabled)
      --mboard 0|1|2     Number of mockingboards in Slot 4 and/or Slot 5
      --luma bandwidth   NTSC Luma B/W (Valid value: 0-7159090, Default: 2300000)
      --chroma bandwidth NTSC Chroma B/W (Valid value: 0-7159090, Default: 600000)
      --capslock off     Turns off default capslock
      --mac_lc_dlgr      Turns on Mac LC DLGR emulation
      --scale ratio      Scale the graphics by ratio (Default is 2.0)
      --z80_cirtech      Enable Z80 Cirtech address translation
      --saturn           Enable Saturn memory (Only available in Apple 2+)
      --dongle model     Enable dongle
                         Value: speedstar, hayden, codewriter, robocom500,
                                robocom1000, robocom1500
      --interface name   Set the interface name for Uthernet2
                         Default is None. For e.g. eth0

  ARGS:
      [disk 1]           Disk 1 file (woz, dsk, do, po file). File can be in gz format
      [disk 2]           Disk 2 file (woz, dsk, do, po file). File can be in gz format

  Function Keys:
      Ctrl-Shift-F1      Display emulation speed
      Ctrl-Shift-F2      Disassemble current instructions
      Ctrl-Shift-F3      Dump track sector information
      Ctrl-Shift-F4      Dump disk WOZ information
      Ctrl-F1            Eject Disk 1
      Ctrl-F2            Eject Disk 2
      Ctrl-F3            Save state in YAML file
      Ctrl-F4            Load state from YAML file
      Ctrl-F5            Disable / Enable video scanline mode
      Ctrl-F6            Disable / Enable audio filter
      Ctrl-F7            Disable / Enable color burst for 60 Hz display
      Ctrl-F7            Load Tape
      Ctrl-F8            Eject Tape
      Ctrl-F10           Eject Hard Disk 1
      Ctrl-F11           Eject Hard Disk 2
      Ctrl-PrintScreen   Save screenshot as screenshot.png
      Shift-Insert       Paste clipboard text to the emulator
      F1                 Load Disk 1 file
      F2                 Load Disk 2 file
      F3                 Swap Disk 1 and Disk 2
      F4                 Disable / Enable Joystick
      F5                 Disable / Enable Fask Disk emulation
      F6 / Shift-F6      Toggle Display Mode (Default, NTSC, RGB, Mono)
      F7                 Disable / Enable 50/60 Hz video
      F8                 Disable / Enable Joystick jitter
      F9 / Shift-F9      Toggle speed (1 MHz, 2.8 MHz, 4 MHz, 8 MHz, Fastest)
      F10                Load Hard Disk 1 file
      F11                Load Hard Disk 2 file
      F12 / Break        Reset