Amandine Caillat - Academia.edu (original) (raw)
Papers by Amandine Caillat
Astronomy & Astrophysics, 2021
Imaging faint objects, such as exoplanets or disks, around nearby stars is extremely challenging ... more Imaging faint objects, such as exoplanets or disks, around nearby stars is extremely challenging because host star images are dominated by the telescope diffraction pattern. Using a coronagraph is an efficient solution for removing diffraction but requires an incoming wavefront with good quality to maximize starlight rejection. On the ground, the most advanced exoplanet imagers use extreme adaptive optics (ExAO) systems that are based on a deformable mirror (DM) with a large number of actuators to efficiently compensate for high-order aberrations and provide diffraction-limited images. While several exoplanet imagers with DMs using ∼1500 actuators are now routinely operating on large telescopes to observe gas giant planets, future systems may require a tenfold increase in the number of degrees of freedom to look for rocky planets. In this paper, we explore wavefront correction with a secondary adaptive optics system that controls a very large number of degrees of freedom that are no...
The segmented pupil experiment for exoplanet detection (SPEED) facility aims to improve knowledge... more The segmented pupil experiment for exoplanet detection (SPEED) facility aims to improve knowledge and insight into various areas required for gearing up high-contrast imaging instruments adapted to the unprecedented high angular resolution and complexity of the forthcoming extremely large telescopes (ELTs). SPEED combines an ELT simulator, cophasing optics, wavefront control and shaping with a multi-deformable mirror (DM) system, and optimized small inner-working angle (IWA) coronagraphy. The fundamental objective of the SPEED setup is to demonstrate deep contrast into a dark hole optimized for small field of view and very small IWA, adapted to the hunt of exoplanets in the habitable zone around late-type stars. SPEED is designed to implement an optimized small IWA coronagraph: the phase-induced amplitude apodization complex mask coronagraph (PIAACMC). The PIAACMC consists in a multi-zone phase-shifting focal plane mask (FPM) and two apodization mirrors (PIAA-M1 and PIAA-M2), with s...
Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation, 2014
ABSTRACT A GRISM, made of a grating on a prism, allow combining image and spectroscopy of the sam... more ABSTRACT A GRISM, made of a grating on a prism, allow combining image and spectroscopy of the same field of view with the same optical system and detector, thus simplify instrument concept. New GRISM designs impose technical specifications difficult to reach with classical grating manufacturing processes: large useful aperture (>100mm), low groove frequency (<30g/mm), small blaze angle (<3°) and, last but not least, line curvature allowing wavefront corrections. In addition, gratings are commonly made of resin which may not be suitable to withstand the extreme space environment. Therefore, in the frame of a R&D project financed by the CNES, SILIOS Technologies developed a new resin-free grating manufacturing process and realized a first 80mm diameter prototype optically tested at LAM. We present detailed specifications of this resin-free grating, the manufacturing process, optical setups and models for optical performance verification and very encouraging results obtained on the first 80mm diameter grating prototype: >80% transmitted efficiency, <30nm RMS wavefront error, groove shape and roughness very close to theory and uniform over the useful aperture.
Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation, 2014
ABSTRACT
Space Telescopes and Instrumentation 2012: Optical, Infrared, and Millimeter Wave, 2012
ABSTRACT
The ESA Euclid mission is intended to explore the dark side of the Universe, particularly to unde... more The ESA Euclid mission is intended to explore the dark side of the Universe, particularly to understand the nature of the dark energy responsible of the accelerating expansion of the Universe. One of the two probes carried by this mission is the Baryonic Acoustic Oscillation (BAO) that requires the redshift measurements of millions of galaxies. In the Euclid design, these massive NIR spectroscopic measurements are based on slitless low resolution grisms. These grisms with low groove density and small blaze angle are difficult to manufacture by conventional replica process. Two years ago we started a CNES R&D program to develop grism manufacturing by the photolithographic process which is well adapted to coarse gratings. In addition, this original method allows introducing optical aberration correction by ruling curved and non-parallel grooves in order to simplify the instrument optical design. During the Euclid Phase A, we developed several prototypes of gratings made by photolithography. In this paper, we present the optical performance test results, including tests in the specific environment of the Euclid mission.
Space Telescopes and Instrumentation 2018: Optical, Infrared, and Millimeter Wave
ESA EUCLID mission will be launched in 2020 to understand the nature of the dark energy responsib... more ESA EUCLID mission will be launched in 2020 to understand the nature of the dark energy responsible of the accelerated expansion of the Universe and to map the geometry of the dark matter. The map will investigate the distanceredshift relationship and the evolution of cosmic structures thanks to two instruments: the NISP and the VIS. The NISP (Near Infrared Spectro-Photometer) is operating in the near-IR spectral range (0.9-2μm) with two observing modes: the photometric mode for the acquisition of images with broad band filters, and the spectroscopic mode for the acquisition of slitless dispersed images on the detectors. The spectroscopic mode uses four low resolution grisms to cover two spectral ranges: three "red" grisms for 1250-1850nm range, with three different orientations, and one "blue" grism for 920- 1300nm range. The NISP grisms are complex optical components combining four main optical functions: a grism function (dispersion without beam deviation of the first diffracted order) done by the grating on the prism hypotenuse, a spectral filter done by a multilayer filter deposited on the first face of the prism to select the spectral bandpass, a focus function done by the curved filter face of the prism (curvature radius of 10m) and a spectral wavefront correction done by the grating which grooves paths are nor parallel, neither straight. The development of these components have been started since 10 years at the Laboratoire d’Astrophysique de Marseille (LAM) and was linked to the project phases: prototypes have been developed to demonstrate the feasibility, then engineering and qualification models to validate the optical and mechanical performance of the component, finally the flight models have been manufactured and tested and will be installed on NISP instrument. In this paper, we present the optical performance of the four EUCLID NISP grisms flight models characterized at LAM: wavefront error, spectral transmission and grating groove profiles. The test devices and the methods developed for the characterization of these specific optical components are described. The analysis of the test results have shown that the grisms flight models for NISP are within specifications with an efficiency better than 70% on the spectral bandpass and a wavefront error on surfaces better than 30nm RMS. The components have withstood vibration qualification level up to 11.6g RMS in random test and vacuum cryogenics test down to 130K with measurement of optical quality in transmission. The EUCLID grisms flight models have been delivered to NISP project in November 2017 after the test campaign done at LAM that has demonstrated the compliance to the specifications.
In order to study the dark universe (energy and matter), EUCLID space mission will collect near i... more In order to study the dark universe (energy and matter), EUCLID space mission will collect near infrared spectra and images of millions of galaxies. This massive measurement survey requires a slitless spectroscopic channel including GRISMs (for “Grating pRISMs”) in NISP (Near Infrared SpectroPhotometer). Very special technical specifications are required for the grating manufacturing: large aperture, low groove frequency and blaze angle, line curvature. In addition, it has to withstand space environment. Therefore, in the frame of a R&D project funded by the CNES, we developed bulk silica gratings in close collaboration with the French company SILIOS Technologies. SILIOS delivered two resin-free blazed gratings with curved lines engraved directly into the fused silica substrate of 80mm and 108mm useful aperture. At LAM, we measured very high optical performances of these prototypes: <80% transmitted efficiency, <30nm RMS wavefront error, groove shape and roughness very close t...
Novel Patterning Technologies for Semiconductors, MEMS/NEMS, and MOEMS 2019, 2019
Optical Instrument Science, Technology, and Applications II
Optical and Infrared Interferometry and Imaging V, 2016
Space Telescopes and Instrumentation 2016: Optical, Infrared, and Millimeter Wave, 2016
Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation II, 2016
Space Telescopes and Instrumentation 2016: Optical, Infrared, and Millimeter Wave, 2016
The Euclid mission objective is to understand why the expansion of the Universe is accelerating t... more The Euclid mission objective is to understand why the expansion of the Universe is accelerating through by mapping the geometry of the dark Universe by investigating the distance-redshift relationship and tracing the evolution of cosmic structures. The Euclid project is part of ESA's Cosmic Vision program with its launch planned for 2020 (ref [1]). The NISP (Near Infrared Spectrometer and Photometer) is one of the two Euclid instruments and is operating in the near-IR spectral region (900-2000nm) as a photometer and spectrometer. The instrument is composed of: -a cold (135K) optomechanical subsystem consisting of a Silicon carbide structure, an optical assembly (corrector and camera lens), a filter wheel mechanism, a grism wheel mechanism, a calibration unit and a thermal control system -a detection subsystem based on a mosaic of 16 HAWAII2RG cooled to 95K with their front-end readout electronic cooled to 140K, integrated on a mechanical focal plane structure made with molybdenum and aluminum. The detection subsystem is mounted on the optomechanical subsystem structure -a warm electronic subsystem (280K) composed of a data processing / detector control unit and of an instrument control unit that interfaces with the spacecraft via a 1553 bus for command and control and via Spacewire links for science data This presentation describes the architecture of the instrument at the end of the phase C (Detailed Design Review), the expected performance, the technological key challenges and preliminary test results obtained for different NISP subsystem breadboards and for the NISP Structural and Thermal model (STM).
Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation, 2014
ABSTRACT A GRISM, made of a grating on a prism, allow combining image and spectroscopy of the sam... more ABSTRACT A GRISM, made of a grating on a prism, allow combining image and spectroscopy of the same field of view with the same optical system and detector, thus simplify instrument concept. New GRISM designs impose technical specifications difficult to reach with classical grating manufacturing processes: large useful aperture (>100mm), low groove frequency (<30g/mm), small blaze angle (<3°) and, last but not least, line curvature allowing wavefront corrections. In addition, gratings are commonly made of resin which may not be suitable to withstand the extreme space environment. Therefore, in the frame of a R&D project financed by the CNES, SILIOS Technologies developed a new resin-free grating manufacturing process and realized a first 80mm diameter prototype optically tested at LAM. We present detailed specifications of this resin-free grating, the manufacturing process, optical setups and models for optical performance verification and very encouraging results obtained on the first 80mm diameter grating prototype: >80% transmitted efficiency, <30nm RMS wavefront error, groove shape and roughness very close to theory and uniform over the useful aperture.
Space Telescopes and Instrumentation 2012: Optical, Infrared, and Millimeter Wave, 2012
ABSTRACT
Adaptive Optics Systems IV, 2014
ABSTRACT The exoplanet direct imagers Gemini/GPI and VLT/SPHERE are built around extreme adaptive... more ABSTRACT The exoplanet direct imagers Gemini/GPI and VLT/SPHERE are built around extreme adaptive optics (ExAO) to correct the atmospheric turbulence and the aberrations associated with the optical surfaces. However, additional strategies are necessary to correct the non-common path aberrations (NCPA) between the ExAO and science paths that can limit the instrument contrast performance. To perform an adequate calibration, we have developed ZELDA, a Zernike sensor to achieve NCPA measurements with nanometric accuracy. We report the results of a new design analysis that maximizes the dynamic range, and from laboratory demonstrations on the LAM high-contrast testbed and on VLT/SPHERE during its integration.
Astronomy & Astrophysics, 2021
Imaging faint objects, such as exoplanets or disks, around nearby stars is extremely challenging ... more Imaging faint objects, such as exoplanets or disks, around nearby stars is extremely challenging because host star images are dominated by the telescope diffraction pattern. Using a coronagraph is an efficient solution for removing diffraction but requires an incoming wavefront with good quality to maximize starlight rejection. On the ground, the most advanced exoplanet imagers use extreme adaptive optics (ExAO) systems that are based on a deformable mirror (DM) with a large number of actuators to efficiently compensate for high-order aberrations and provide diffraction-limited images. While several exoplanet imagers with DMs using ∼1500 actuators are now routinely operating on large telescopes to observe gas giant planets, future systems may require a tenfold increase in the number of degrees of freedom to look for rocky planets. In this paper, we explore wavefront correction with a secondary adaptive optics system that controls a very large number of degrees of freedom that are no...
The segmented pupil experiment for exoplanet detection (SPEED) facility aims to improve knowledge... more The segmented pupil experiment for exoplanet detection (SPEED) facility aims to improve knowledge and insight into various areas required for gearing up high-contrast imaging instruments adapted to the unprecedented high angular resolution and complexity of the forthcoming extremely large telescopes (ELTs). SPEED combines an ELT simulator, cophasing optics, wavefront control and shaping with a multi-deformable mirror (DM) system, and optimized small inner-working angle (IWA) coronagraphy. The fundamental objective of the SPEED setup is to demonstrate deep contrast into a dark hole optimized for small field of view and very small IWA, adapted to the hunt of exoplanets in the habitable zone around late-type stars. SPEED is designed to implement an optimized small IWA coronagraph: the phase-induced amplitude apodization complex mask coronagraph (PIAACMC). The PIAACMC consists in a multi-zone phase-shifting focal plane mask (FPM) and two apodization mirrors (PIAA-M1 and PIAA-M2), with s...
Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation, 2014
ABSTRACT A GRISM, made of a grating on a prism, allow combining image and spectroscopy of the sam... more ABSTRACT A GRISM, made of a grating on a prism, allow combining image and spectroscopy of the same field of view with the same optical system and detector, thus simplify instrument concept. New GRISM designs impose technical specifications difficult to reach with classical grating manufacturing processes: large useful aperture (>100mm), low groove frequency (<30g/mm), small blaze angle (<3°) and, last but not least, line curvature allowing wavefront corrections. In addition, gratings are commonly made of resin which may not be suitable to withstand the extreme space environment. Therefore, in the frame of a R&D project financed by the CNES, SILIOS Technologies developed a new resin-free grating manufacturing process and realized a first 80mm diameter prototype optically tested at LAM. We present detailed specifications of this resin-free grating, the manufacturing process, optical setups and models for optical performance verification and very encouraging results obtained on the first 80mm diameter grating prototype: >80% transmitted efficiency, <30nm RMS wavefront error, groove shape and roughness very close to theory and uniform over the useful aperture.
Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation, 2014
ABSTRACT
Space Telescopes and Instrumentation 2012: Optical, Infrared, and Millimeter Wave, 2012
ABSTRACT
The ESA Euclid mission is intended to explore the dark side of the Universe, particularly to unde... more The ESA Euclid mission is intended to explore the dark side of the Universe, particularly to understand the nature of the dark energy responsible of the accelerating expansion of the Universe. One of the two probes carried by this mission is the Baryonic Acoustic Oscillation (BAO) that requires the redshift measurements of millions of galaxies. In the Euclid design, these massive NIR spectroscopic measurements are based on slitless low resolution grisms. These grisms with low groove density and small blaze angle are difficult to manufacture by conventional replica process. Two years ago we started a CNES R&D program to develop grism manufacturing by the photolithographic process which is well adapted to coarse gratings. In addition, this original method allows introducing optical aberration correction by ruling curved and non-parallel grooves in order to simplify the instrument optical design. During the Euclid Phase A, we developed several prototypes of gratings made by photolithography. In this paper, we present the optical performance test results, including tests in the specific environment of the Euclid mission.
Space Telescopes and Instrumentation 2018: Optical, Infrared, and Millimeter Wave
ESA EUCLID mission will be launched in 2020 to understand the nature of the dark energy responsib... more ESA EUCLID mission will be launched in 2020 to understand the nature of the dark energy responsible of the accelerated expansion of the Universe and to map the geometry of the dark matter. The map will investigate the distanceredshift relationship and the evolution of cosmic structures thanks to two instruments: the NISP and the VIS. The NISP (Near Infrared Spectro-Photometer) is operating in the near-IR spectral range (0.9-2μm) with two observing modes: the photometric mode for the acquisition of images with broad band filters, and the spectroscopic mode for the acquisition of slitless dispersed images on the detectors. The spectroscopic mode uses four low resolution grisms to cover two spectral ranges: three "red" grisms for 1250-1850nm range, with three different orientations, and one "blue" grism for 920- 1300nm range. The NISP grisms are complex optical components combining four main optical functions: a grism function (dispersion without beam deviation of the first diffracted order) done by the grating on the prism hypotenuse, a spectral filter done by a multilayer filter deposited on the first face of the prism to select the spectral bandpass, a focus function done by the curved filter face of the prism (curvature radius of 10m) and a spectral wavefront correction done by the grating which grooves paths are nor parallel, neither straight. The development of these components have been started since 10 years at the Laboratoire d’Astrophysique de Marseille (LAM) and was linked to the project phases: prototypes have been developed to demonstrate the feasibility, then engineering and qualification models to validate the optical and mechanical performance of the component, finally the flight models have been manufactured and tested and will be installed on NISP instrument. In this paper, we present the optical performance of the four EUCLID NISP grisms flight models characterized at LAM: wavefront error, spectral transmission and grating groove profiles. The test devices and the methods developed for the characterization of these specific optical components are described. The analysis of the test results have shown that the grisms flight models for NISP are within specifications with an efficiency better than 70% on the spectral bandpass and a wavefront error on surfaces better than 30nm RMS. The components have withstood vibration qualification level up to 11.6g RMS in random test and vacuum cryogenics test down to 130K with measurement of optical quality in transmission. The EUCLID grisms flight models have been delivered to NISP project in November 2017 after the test campaign done at LAM that has demonstrated the compliance to the specifications.
In order to study the dark universe (energy and matter), EUCLID space mission will collect near i... more In order to study the dark universe (energy and matter), EUCLID space mission will collect near infrared spectra and images of millions of galaxies. This massive measurement survey requires a slitless spectroscopic channel including GRISMs (for “Grating pRISMs”) in NISP (Near Infrared SpectroPhotometer). Very special technical specifications are required for the grating manufacturing: large aperture, low groove frequency and blaze angle, line curvature. In addition, it has to withstand space environment. Therefore, in the frame of a R&D project funded by the CNES, we developed bulk silica gratings in close collaboration with the French company SILIOS Technologies. SILIOS delivered two resin-free blazed gratings with curved lines engraved directly into the fused silica substrate of 80mm and 108mm useful aperture. At LAM, we measured very high optical performances of these prototypes: <80% transmitted efficiency, <30nm RMS wavefront error, groove shape and roughness very close t...
Novel Patterning Technologies for Semiconductors, MEMS/NEMS, and MOEMS 2019, 2019
Optical Instrument Science, Technology, and Applications II
Optical and Infrared Interferometry and Imaging V, 2016
Space Telescopes and Instrumentation 2016: Optical, Infrared, and Millimeter Wave, 2016
Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation II, 2016
Space Telescopes and Instrumentation 2016: Optical, Infrared, and Millimeter Wave, 2016
The Euclid mission objective is to understand why the expansion of the Universe is accelerating t... more The Euclid mission objective is to understand why the expansion of the Universe is accelerating through by mapping the geometry of the dark Universe by investigating the distance-redshift relationship and tracing the evolution of cosmic structures. The Euclid project is part of ESA's Cosmic Vision program with its launch planned for 2020 (ref [1]). The NISP (Near Infrared Spectrometer and Photometer) is one of the two Euclid instruments and is operating in the near-IR spectral region (900-2000nm) as a photometer and spectrometer. The instrument is composed of: -a cold (135K) optomechanical subsystem consisting of a Silicon carbide structure, an optical assembly (corrector and camera lens), a filter wheel mechanism, a grism wheel mechanism, a calibration unit and a thermal control system -a detection subsystem based on a mosaic of 16 HAWAII2RG cooled to 95K with their front-end readout electronic cooled to 140K, integrated on a mechanical focal plane structure made with molybdenum and aluminum. The detection subsystem is mounted on the optomechanical subsystem structure -a warm electronic subsystem (280K) composed of a data processing / detector control unit and of an instrument control unit that interfaces with the spacecraft via a 1553 bus for command and control and via Spacewire links for science data This presentation describes the architecture of the instrument at the end of the phase C (Detailed Design Review), the expected performance, the technological key challenges and preliminary test results obtained for different NISP subsystem breadboards and for the NISP Structural and Thermal model (STM).
Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation, 2014
ABSTRACT A GRISM, made of a grating on a prism, allow combining image and spectroscopy of the sam... more ABSTRACT A GRISM, made of a grating on a prism, allow combining image and spectroscopy of the same field of view with the same optical system and detector, thus simplify instrument concept. New GRISM designs impose technical specifications difficult to reach with classical grating manufacturing processes: large useful aperture (>100mm), low groove frequency (<30g/mm), small blaze angle (<3°) and, last but not least, line curvature allowing wavefront corrections. In addition, gratings are commonly made of resin which may not be suitable to withstand the extreme space environment. Therefore, in the frame of a R&D project financed by the CNES, SILIOS Technologies developed a new resin-free grating manufacturing process and realized a first 80mm diameter prototype optically tested at LAM. We present detailed specifications of this resin-free grating, the manufacturing process, optical setups and models for optical performance verification and very encouraging results obtained on the first 80mm diameter grating prototype: >80% transmitted efficiency, <30nm RMS wavefront error, groove shape and roughness very close to theory and uniform over the useful aperture.
Space Telescopes and Instrumentation 2012: Optical, Infrared, and Millimeter Wave, 2012
ABSTRACT
Adaptive Optics Systems IV, 2014
ABSTRACT The exoplanet direct imagers Gemini/GPI and VLT/SPHERE are built around extreme adaptive... more ABSTRACT The exoplanet direct imagers Gemini/GPI and VLT/SPHERE are built around extreme adaptive optics (ExAO) to correct the atmospheric turbulence and the aberrations associated with the optical surfaces. However, additional strategies are necessary to correct the non-common path aberrations (NCPA) between the ExAO and science paths that can limit the instrument contrast performance. To perform an adequate calibration, we have developed ZELDA, a Zernike sensor to achieve NCPA measurements with nanometric accuracy. We report the results of a new design analysis that maximizes the dynamic range, and from laboratory demonstrations on the LAM high-contrast testbed and on VLT/SPHERE during its integration.