Hakan Alaboz - Academia.edu (original) (raw)

Papers by Hakan Alaboz

Research paper thumbnail of THz gratings produced by laser cutting

we produced terahertz gratings from aluminum and PVC foil by laser cutting. The performance of th... more we produced terahertz gratings from aluminum and PVC foil by laser cutting. The performance of the produced gratings was simulated and found to be in good agreement with the experimental characterization.

Research paper thumbnail of Investigation of electron beam lithography effects on metal–insulator transition behavior of vanadium dioxide

Physica Scripta, Oct 25, 2017

Vanadium dioxide (VO2) shows metal–insulator phase transition at nearly 68 °C. This metal–insulat... more Vanadium dioxide (VO2) shows metal–insulator phase transition at nearly 68 °C. This metal–insulator transition (MIT) in VO2 leads to a significant change in near-infrared transmittance and an abrupt change in the resistivity of VO2. Due to these characteristics, VO2 plays an important role on optic and electronic devices, such as thermochromic windows, meta-materials with tunable frequency, uncooled bolometers and switching devices. In this work, VO2 thin films were fabricated by reactive direct current magnetron sputtering in O2/Ar atmosphere on sapphire substrates without any further post annealing processes. The effect of sputtering parameters on optical characteristics and structural properties of grown thin films was investigated by SEM, XRD, Raman and UV/VIS spectrophotometer measurements. Patterning process of VO2 thin films was realized by e-beam lithography technique to monitor the temperature dependent electrical characterization. Electrical properties of VO2 samples were characterized using microprobe station in a vacuum system. MIT with hysteresis behavior was observed for the unpatterned square samples at around 68 °C. By four orders of magnitude of resistivity change was measured for the deposited VO2 thin films at transition temperature. After e-beam lithography process, substantial results in patterned VO2 thin films were observed. In this stage, for patterned VO2 thin films as stripes, the change in resistivity of VO2 was reduced by a factor of 10. As a consequence of electrical resistivity measurements, MIT temperature was shifted from 68 °C to 50 °C. The influence of e-beam process on the properties of VO2 thin films and the mechanism of the effects are discussed. The presented results contribute to the achievement of VO2 based thermochromic windows and bolometer applications.

Research paper thumbnail of Comparative study of annealing and gold dopant effect on DC sputtered vanadium oxide films for bolometer applications

Optical and Quantum Electronics

Vanadium oxide (VOx) thin film has been widely used for IR detectors and it is one of the promisi... more Vanadium oxide (VOx) thin film has been widely used for IR detectors and it is one of the promising materials for THz detectors due to its high temperature coefficient of resistance (TCR) values. VOx films with proper TCR values have also high resistance and it restricts bolometer performance especially for uncooled bolometers. To overcome this problem, deposition at elevated temperatures or annealing approach has been accepted and used but gold co-deposition approach has been proposed recently. In this study, vanadium oxide films were fabricated on high resistivity silicon substrates by reactive direct current magnetron sputtering in different O2/Ar atmosphere at room temperature. We investigated influence of oxygen partial pressure during deposition process and fabricated VOx thin films with sufficient TCR values for bolometer applications. In order to decrease resistivity of the deposited films, post annealing and gold doping approaches were performed separately. Effect of both post annealing process and gold doping process on structural and electrical properties of VOx thin films deposited at room temperature were investigated and detailed comparison between these methods were presented. We obtained the best possible approach to obtain optimum conditions for the highly reproducible VOx thin films which have the best resistivity and suitable TCR value for bolometer applications.

Research paper thumbnail of Adsorption vs. folding of a Hydrophobic Chain Protein Model near an Attractive Surface

arXiv: Soft Condensed Matter, 2015

The folding vs. adsorption behaviour of a coarse-grained off-lattice protein model near an attrac... more The folding vs. adsorption behaviour of a coarse-grained off-lattice protein model near an attractive surface is presented within the frame of a Multicanonical Monte Carlo simulations. In the polymer-surface model, the Lennard-Jones potential is assumed as an interaction potential between the effective monomers and the attractive surface. Thermodynamic properties and some structural parameters for the minimum energy conformations are calculated for comparison of the folding and adsorption cases.

Research paper thumbnail of Metal mesh filters based on Ti, ITO and Cu thin films for terahertz waves

Optical and Quantum Electronics, Feb 1, 2016

In this study, we have investigated the spectral performance of resonant terahertz (THz) bandpass... more In this study, we have investigated the spectral performance of resonant terahertz (THz) bandpass filters which were produced from thin films with a metal-mesh shape. The aforementioned filters were fabricated from titanium, copper and indium tin oxide thin films on fused silica substrates by UV lithography with an array of cross-shaped apertures. Since the mesh period, cross-arm length and its width specify the spectral characteristics of the filters, we were able to reveal the performance of these filters experimentally using both a THz time domain spectrometer and a Fourier transform infrared spectrometer. A commercial electromagnetic simulation software, CST microwave studio, was used to verify the experimental data. The transmission of the filters are in the range 20-55 % at their relevant center frequencies. To our knowledge this study is the first to show that fabricated patterns based on ITO thin films can be used to filter THz radiation.

Research paper thumbnail of Fourcross shaped metamaterial filters fabricated from high temperature superconducting YBCO and Au thin films for terahertz waves

In this study, we present a new, unique fourcross shaped metamaterial terahertz (THz) filter fabr... more In this study, we present a new, unique fourcross shaped metamaterial terahertz (THz) filter fabricated from both gold thin films and YBa 2 Cu 3 O 7−d high T c superconducting thin films. A commercial electromagnetic simulation software, CST Microwave Studio, is used to design and optimize the metamaterial filter structures. The proposed fourcross shaped rectangular filter structure consists of periodic metallic rings where strip lines are located at the sides of the ring. Fourcross metamaterial filters are fabricated by using e-beam lithography and ion beam etching techniques. Terahertz time-domain spectroscopy measurements validated the design predictions for both the center frequencies and bandwidths of the resonances due to the fourcross structures. The resonance switching of the transmission spectra was investigated by lowering the temperature below the critical transition temperature. This resonance switching effect is not observed in filters made up of metals. This novel fourcross rectangular resonator with a temperature-dependent resonance behavior holds great potential for active, tunable and low loss THz devices for imaging, sensing, and detection applications.

Research paper thumbnail of An indium tin oxide metasurface filter for terahertz applications: Design, fabrication, and characterization

Modern Physics Letters B

In this paper, using a cross-shaped complementary Indium Tin Oxide (ITO)-based metasurface design... more In this paper, using a cross-shaped complementary Indium Tin Oxide (ITO)-based metasurface design, the transmission of THz radiation is shown to be filtered within the 3 dB level from maximum in the frequency range of interest ([Formula: see text][Formula: see text]333 GHz). Various metasurface structures primarily composed of cross-shaped openings with a 400 micron unit cell size are patterned on top of 1750 micron thick fused silica substrates. They are patterned using UV lithography methods after the films were grown using DC sputtering. The fabricated structures were characterized using Terahertz Time Domain Spectroscopy (THz-TDS) measurement technique. The measured transmission agrees well with the simulation of the structure for four different samples with different geometries. These results suggest that metasurface and/or metamaterial patterns based on ITO in visibly transparent media can be utilized for filtering of frequencies in the long wavelength spectrum. These types of...

Research paper thumbnail of An indium tin oxide metasurface filter for terahertz applications: Design, fabrication, and characterization

Modern Physics Letters B

In this paper, using a cross-shaped complementary Indium Tin Oxide (ITO)-based metasurface design... more In this paper, using a cross-shaped complementary Indium Tin Oxide (ITO)-based metasurface design, the transmission of THz radiation is shown to be filtered within the 3 dB level from maximum in the frequency range of interest ([Formula: see text][Formula: see text]333 GHz). Various metasurface structures primarily composed of cross-shaped openings with a 400 micron unit cell size are patterned on top of 1750 micron thick fused silica substrates. They are patterned using UV lithography methods after the films were grown using DC sputtering. The fabricated structures were characterized using Terahertz Time Domain Spectroscopy (THz-TDS) measurement technique. The measured transmission agrees well with the simulation of the structure for four different samples with different geometries. These results suggest that metasurface and/or metamaterial patterns based on ITO in visibly transparent media can be utilized for filtering of frequencies in the long wavelength spectrum. These types of...

Research paper thumbnail of Area dependence and influence of crystal inhomogeneity on superconducting properties of Bi2212 mesa structures

Vacuum, 2015

ABSTRACT The rapid increase in applications of terahertz waves requires new techniques to obtain ... more ABSTRACT The rapid increase in applications of terahertz waves requires new techniques to obtain continuous wave terahertz sources. Mesa structures fabricated from high-Tc superconductor Bi2Sr2CaCu2O8+δ (Bi2212) single crystal have been observed as an intense, coherent, continuous electromagnetic wave source in the terahertz (THz) frequency region. However, in order to produce coherent radiation with high applicable power, we need large mesa structures that enter a collective electromagnetic state in which their oscillations are largely synchronized in phase. On the other hand, large mesa structures cause a heating problem. In this study, we report on the critical current density dependence of mesa area and the crystal inhomogeneity to understand heating problems in large area mesas for terahertz radiation. Since the doping dependence of Bi2212 is an important parameter, the as-grown Bi2212 crystals were heat-treated at various temperatures under vacuum conditions. We have fabricated triple mesa structures from Bi2212 single crystal using e-beam lithography and argon ion beam etching techniques with same area and with different area on the same chip. We investigated and compared characteristics of triple mesas which are on the same chip and next to each other. In this way, we searched the crystal inhomogeneity in triple mesa structures and studied the critical current density dependence of mesa area to obtain high emission power for the THz radiation. Our experimental results clearly show that the Josephson critical current density is decreasing when the area of mesa is increasing.

Research paper thumbnail of THz gratings produced by laser cutting

we produced terahertz gratings from aluminum and PVC foil by laser cutting. The performance of th... more we produced terahertz gratings from aluminum and PVC foil by laser cutting. The performance of the produced gratings was simulated and found to be in good agreement with the experimental characterization.

Research paper thumbnail of Investigation of electron beam lithography effects on metal–insulator transition behavior of vanadium dioxide

Physica Scripta, Oct 25, 2017

Vanadium dioxide (VO2) shows metal–insulator phase transition at nearly 68 °C. This metal–insulat... more Vanadium dioxide (VO2) shows metal–insulator phase transition at nearly 68 °C. This metal–insulator transition (MIT) in VO2 leads to a significant change in near-infrared transmittance and an abrupt change in the resistivity of VO2. Due to these characteristics, VO2 plays an important role on optic and electronic devices, such as thermochromic windows, meta-materials with tunable frequency, uncooled bolometers and switching devices. In this work, VO2 thin films were fabricated by reactive direct current magnetron sputtering in O2/Ar atmosphere on sapphire substrates without any further post annealing processes. The effect of sputtering parameters on optical characteristics and structural properties of grown thin films was investigated by SEM, XRD, Raman and UV/VIS spectrophotometer measurements. Patterning process of VO2 thin films was realized by e-beam lithography technique to monitor the temperature dependent electrical characterization. Electrical properties of VO2 samples were characterized using microprobe station in a vacuum system. MIT with hysteresis behavior was observed for the unpatterned square samples at around 68 °C. By four orders of magnitude of resistivity change was measured for the deposited VO2 thin films at transition temperature. After e-beam lithography process, substantial results in patterned VO2 thin films were observed. In this stage, for patterned VO2 thin films as stripes, the change in resistivity of VO2 was reduced by a factor of 10. As a consequence of electrical resistivity measurements, MIT temperature was shifted from 68 °C to 50 °C. The influence of e-beam process on the properties of VO2 thin films and the mechanism of the effects are discussed. The presented results contribute to the achievement of VO2 based thermochromic windows and bolometer applications.

Research paper thumbnail of Comparative study of annealing and gold dopant effect on DC sputtered vanadium oxide films for bolometer applications

Optical and Quantum Electronics

Vanadium oxide (VOx) thin film has been widely used for IR detectors and it is one of the promisi... more Vanadium oxide (VOx) thin film has been widely used for IR detectors and it is one of the promising materials for THz detectors due to its high temperature coefficient of resistance (TCR) values. VOx films with proper TCR values have also high resistance and it restricts bolometer performance especially for uncooled bolometers. To overcome this problem, deposition at elevated temperatures or annealing approach has been accepted and used but gold co-deposition approach has been proposed recently. In this study, vanadium oxide films were fabricated on high resistivity silicon substrates by reactive direct current magnetron sputtering in different O2/Ar atmosphere at room temperature. We investigated influence of oxygen partial pressure during deposition process and fabricated VOx thin films with sufficient TCR values for bolometer applications. In order to decrease resistivity of the deposited films, post annealing and gold doping approaches were performed separately. Effect of both post annealing process and gold doping process on structural and electrical properties of VOx thin films deposited at room temperature were investigated and detailed comparison between these methods were presented. We obtained the best possible approach to obtain optimum conditions for the highly reproducible VOx thin films which have the best resistivity and suitable TCR value for bolometer applications.

Research paper thumbnail of Adsorption vs. folding of a Hydrophobic Chain Protein Model near an Attractive Surface

arXiv: Soft Condensed Matter, 2015

The folding vs. adsorption behaviour of a coarse-grained off-lattice protein model near an attrac... more The folding vs. adsorption behaviour of a coarse-grained off-lattice protein model near an attractive surface is presented within the frame of a Multicanonical Monte Carlo simulations. In the polymer-surface model, the Lennard-Jones potential is assumed as an interaction potential between the effective monomers and the attractive surface. Thermodynamic properties and some structural parameters for the minimum energy conformations are calculated for comparison of the folding and adsorption cases.

Research paper thumbnail of Metal mesh filters based on Ti, ITO and Cu thin films for terahertz waves

Optical and Quantum Electronics, Feb 1, 2016

In this study, we have investigated the spectral performance of resonant terahertz (THz) bandpass... more In this study, we have investigated the spectral performance of resonant terahertz (THz) bandpass filters which were produced from thin films with a metal-mesh shape. The aforementioned filters were fabricated from titanium, copper and indium tin oxide thin films on fused silica substrates by UV lithography with an array of cross-shaped apertures. Since the mesh period, cross-arm length and its width specify the spectral characteristics of the filters, we were able to reveal the performance of these filters experimentally using both a THz time domain spectrometer and a Fourier transform infrared spectrometer. A commercial electromagnetic simulation software, CST microwave studio, was used to verify the experimental data. The transmission of the filters are in the range 20-55 % at their relevant center frequencies. To our knowledge this study is the first to show that fabricated patterns based on ITO thin films can be used to filter THz radiation.

Research paper thumbnail of Fourcross shaped metamaterial filters fabricated from high temperature superconducting YBCO and Au thin films for terahertz waves

In this study, we present a new, unique fourcross shaped metamaterial terahertz (THz) filter fabr... more In this study, we present a new, unique fourcross shaped metamaterial terahertz (THz) filter fabricated from both gold thin films and YBa 2 Cu 3 O 7−d high T c superconducting thin films. A commercial electromagnetic simulation software, CST Microwave Studio, is used to design and optimize the metamaterial filter structures. The proposed fourcross shaped rectangular filter structure consists of periodic metallic rings where strip lines are located at the sides of the ring. Fourcross metamaterial filters are fabricated by using e-beam lithography and ion beam etching techniques. Terahertz time-domain spectroscopy measurements validated the design predictions for both the center frequencies and bandwidths of the resonances due to the fourcross structures. The resonance switching of the transmission spectra was investigated by lowering the temperature below the critical transition temperature. This resonance switching effect is not observed in filters made up of metals. This novel fourcross rectangular resonator with a temperature-dependent resonance behavior holds great potential for active, tunable and low loss THz devices for imaging, sensing, and detection applications.

Research paper thumbnail of An indium tin oxide metasurface filter for terahertz applications: Design, fabrication, and characterization

Modern Physics Letters B

In this paper, using a cross-shaped complementary Indium Tin Oxide (ITO)-based metasurface design... more In this paper, using a cross-shaped complementary Indium Tin Oxide (ITO)-based metasurface design, the transmission of THz radiation is shown to be filtered within the 3 dB level from maximum in the frequency range of interest ([Formula: see text][Formula: see text]333 GHz). Various metasurface structures primarily composed of cross-shaped openings with a 400 micron unit cell size are patterned on top of 1750 micron thick fused silica substrates. They are patterned using UV lithography methods after the films were grown using DC sputtering. The fabricated structures were characterized using Terahertz Time Domain Spectroscopy (THz-TDS) measurement technique. The measured transmission agrees well with the simulation of the structure for four different samples with different geometries. These results suggest that metasurface and/or metamaterial patterns based on ITO in visibly transparent media can be utilized for filtering of frequencies in the long wavelength spectrum. These types of...

Research paper thumbnail of An indium tin oxide metasurface filter for terahertz applications: Design, fabrication, and characterization

Modern Physics Letters B

In this paper, using a cross-shaped complementary Indium Tin Oxide (ITO)-based metasurface design... more In this paper, using a cross-shaped complementary Indium Tin Oxide (ITO)-based metasurface design, the transmission of THz radiation is shown to be filtered within the 3 dB level from maximum in the frequency range of interest ([Formula: see text][Formula: see text]333 GHz). Various metasurface structures primarily composed of cross-shaped openings with a 400 micron unit cell size are patterned on top of 1750 micron thick fused silica substrates. They are patterned using UV lithography methods after the films were grown using DC sputtering. The fabricated structures were characterized using Terahertz Time Domain Spectroscopy (THz-TDS) measurement technique. The measured transmission agrees well with the simulation of the structure for four different samples with different geometries. These results suggest that metasurface and/or metamaterial patterns based on ITO in visibly transparent media can be utilized for filtering of frequencies in the long wavelength spectrum. These types of...

Research paper thumbnail of Area dependence and influence of crystal inhomogeneity on superconducting properties of Bi2212 mesa structures

Vacuum, 2015

ABSTRACT The rapid increase in applications of terahertz waves requires new techniques to obtain ... more ABSTRACT The rapid increase in applications of terahertz waves requires new techniques to obtain continuous wave terahertz sources. Mesa structures fabricated from high-Tc superconductor Bi2Sr2CaCu2O8+δ (Bi2212) single crystal have been observed as an intense, coherent, continuous electromagnetic wave source in the terahertz (THz) frequency region. However, in order to produce coherent radiation with high applicable power, we need large mesa structures that enter a collective electromagnetic state in which their oscillations are largely synchronized in phase. On the other hand, large mesa structures cause a heating problem. In this study, we report on the critical current density dependence of mesa area and the crystal inhomogeneity to understand heating problems in large area mesas for terahertz radiation. Since the doping dependence of Bi2212 is an important parameter, the as-grown Bi2212 crystals were heat-treated at various temperatures under vacuum conditions. We have fabricated triple mesa structures from Bi2212 single crystal using e-beam lithography and argon ion beam etching techniques with same area and with different area on the same chip. We investigated and compared characteristics of triple mesas which are on the same chip and next to each other. In this way, we searched the crystal inhomogeneity in triple mesa structures and studied the critical current density dependence of mesa area to obtain high emission power for the THz radiation. Our experimental results clearly show that the Josephson critical current density is decreasing when the area of mesa is increasing.