Komkrit Suttiponparnit - Academia.edu (original) (raw)
Uploads
Papers by Komkrit Suttiponparnit
Nanoscale Research Letters, 2011
Characterizing nanoparticle dispersions and understanding the effect of parameters that alter dis... more Characterizing nanoparticle dispersions and understanding the effect of parameters that alter dispersion properties are important for both environmental applications and toxicity investigations. The role of particle surface area, primary particle size, and crystal phase on TiO2 nanoparticle dispersion properties is reported. Hydrodynamic size, zeta potential, and isoelectric point (IEP) of ten laboratory synthesized TiO2 samples, and one commercial Degussa TiO2 sample (P25) dispersed in different solutions were characterized. Solution ionic strength and pH affect titania dispersion properties. The effect of monovalent (NaCl) and divalent (MgCl2) inert electrolytes on dispersion properties was quantified through their contribution to ionic strength. Increasing titania particle surface area resulted in a decrease in solution pH. At fixed pH, increasing the particle surface area enhanced the collision frequency between particles and led to a higher degree of agglomeration. In addition to the synthesis method, TiO2 isoelectric point was found to be dependent on particle size. As anatase TiO2 primary particle size increased from 6 nm to 104 nm, its IEP decreased from 6.0 to 3.8 that also results in changes in dispersion zeta potential and hydrodynamic size. In contrast to particle size, TiO2 nanoparticle IEP was found to be insensitive to particle crystal structure.
Chemical Engineering Science, 2011
ABSTRACT Nanomaterial suspensions with different dopant types and compositions were investigated ... more ABSTRACT Nanomaterial suspensions with different dopant types and compositions were investigated to examine their effects on agglomeration through the measurement of hydrodynamic diameter (HD), surface charge, and isoelectric point (IEP). Four different types of nanoparticles, all synthesized by a flame aerosol reactor, were considered for the analysis. The nanoparticles considered were pristine TiO2, Cu–TiO2, V–TiO2, and Pt–TiO2 with dopant concentrations ranging from 1 to 6wt%. Measurements were conducted over a broad range of pH (3–11) and ionic strengths (0.001–0.1M) to understand the roles of pH and ionic strength (IS) on dispersion characteristics. Calculations were made using the classical DLVO theory to explain the agglomeration behavior. The results indicate that dopant addition can change surface charge, hydrodynamic diameter, and shift the IEP to higher or lower pH than pristine TiO2, depending on the type of dopant and composition. Vanadium and platinum doping shifted the IEP to lower pH values, whereas copper doping shifted it to higher pH values. For each of the nanoparticles considered, pH and IS were found to have significant effects on the surface charge and HD, which were also verified by calculation from DLVO theory.
Nanoscale Research Letters, 2011
Characterizing nanoparticle dispersions and understanding the effect of parameters that alter dis... more Characterizing nanoparticle dispersions and understanding the effect of parameters that alter dispersion properties are important for both environmental applications and toxicity investigations. The role of particle surface area, primary particle size, and crystal phase on TiO2 nanoparticle dispersion properties is reported. Hydrodynamic size, zeta potential, and isoelectric point (IEP) of ten laboratory synthesized TiO2 samples, and one commercial Degussa TiO2 sample (P25) dispersed in different solutions were characterized. Solution ionic strength and pH affect titania dispersion properties. The effect of monovalent (NaCl) and divalent (MgCl2) inert electrolytes on dispersion properties was quantified through their contribution to ionic strength. Increasing titania particle surface area resulted in a decrease in solution pH. At fixed pH, increasing the particle surface area enhanced the collision frequency between particles and led to a higher degree of agglomeration. In addition to the synthesis method, TiO2 isoelectric point was found to be dependent on particle size. As anatase TiO2 primary particle size increased from 6 nm to 104 nm, its IEP decreased from 6.0 to 3.8 that also results in changes in dispersion zeta potential and hydrodynamic size. In contrast to particle size, TiO2 nanoparticle IEP was found to be insensitive to particle crystal structure.
Chemical Engineering Science, 2011
ABSTRACT Nanomaterial suspensions with different dopant types and compositions were investigated ... more ABSTRACT Nanomaterial suspensions with different dopant types and compositions were investigated to examine their effects on agglomeration through the measurement of hydrodynamic diameter (HD), surface charge, and isoelectric point (IEP). Four different types of nanoparticles, all synthesized by a flame aerosol reactor, were considered for the analysis. The nanoparticles considered were pristine TiO2, Cu–TiO2, V–TiO2, and Pt–TiO2 with dopant concentrations ranging from 1 to 6wt%. Measurements were conducted over a broad range of pH (3–11) and ionic strengths (0.001–0.1M) to understand the roles of pH and ionic strength (IS) on dispersion characteristics. Calculations were made using the classical DLVO theory to explain the agglomeration behavior. The results indicate that dopant addition can change surface charge, hydrodynamic diameter, and shift the IEP to higher or lower pH than pristine TiO2, depending on the type of dopant and composition. Vanadium and platinum doping shifted the IEP to lower pH values, whereas copper doping shifted it to higher pH values. For each of the nanoparticles considered, pH and IS were found to have significant effects on the surface charge and HD, which were also verified by calculation from DLVO theory.