Mona Abbassy - Academia.edu (original) (raw)
Papers by Mona Abbassy
journal of orthodontic science, 2018
OBJECTIVE: The aim of this systematic review and meta-analysis is to quantitatively compare previ... more OBJECTIVE: The aim of this systematic review and meta-analysis is to quantitatively compare previous studies that evaluated skeletal and dentoalveolar effects of the ForsusTM Fatigue Resistance Device (FRD) in the treatment of Class II malocclusion with a matched untreated control group. MATERIALS AND METHODS: Four electronic searches PubMed, Web of Science, Cochrane Library, and Science Direct that were limited to articles on human studies comparing the effect of Forsus appliance with a matched control group in the treatment of Class II malocclusion from the year (2000–2017). An additional manual search was carried out by examining the references of the included articles, SEARCH terms included; Forsus and Class II malocclusion. The quality of the included studies was assessed using the modified methodological score for clinical trials. The data were analyzed using Michael Borenstein's Comprehensive Meta-Analysis Software (V3.3.070, Biostat, Inc., US). RESULTS: Seven studies were included comprising 273 participants (Forsus group = 142; control group = 131). The results indicated a statistical significant skeletal effect of the Forsus appliance on increasing the occlusal plane only (P < 0.001). The results also indicated a statistical significant (P < 0.001) dentoalveolar effects of the Forsus appliance on the following outcomes; protruding, proclining, and intruding lower incisors; retroclining upper incisors, distalizing and intruding upper molars, as well as reducing overjet and overbite. CONCLUSIONS: The ForsusTM showed positive effects on the maxillary incisors and first molars as well as overjet and overbite. However, multiple negative effects were reported on the occlusal plane and lower incisors that need to be considered when using such appliance in treating Class II malocclusion.
Journal of Orthodontic Science, 2015
Objectives: The objective was to compare dentofacial characteristics of Class I malocclusion in S... more Objectives: The objective was to compare dentofacial characteristics of Class I malocclusion in Saudi and Japanese adult females. Materials and Methods: Lateral cephalograms of 50 Saudi adult female and 50 Japanese adult female (18-35-year-old) were obtained. All patients were skeletal Class I, angle Class I malocclusion, arch length discrepancy (−10-10 mm), overjet (1-5 mm), overbite (1-5 mm), absence of congenital anomalies, or significant facial asymmetries or congenitally missing tooth other than the 3 rd molar and absence of temporomandibular joint problems. Patient cephalograms were traced and digitized. 16 angular measurements and 13 linear measurements of facial form were used. Results: A comparison of the vertical dimension showed that the Saudi females had a significantly larger gonial angle, a significantly larger facial angle and longer lower face height compared to the Japanese females. Dentally, Saudi females had more protruded incisors with increased distances of the posterior teeth to the palatal plane. For the soft tissue dimension, the Saudi subjects had a significantly more prominent nose, retruded lip and a more protruded chin compared with Japanese. Conclusions: There were significant differences in dentofacial morphology between Saudi and Japanese adult females. Both Asian countries have distinct cephalometric features, which should be considered as a reference in treating patients of varying ethnic backgrounds to optimize the final results.
Coatings
Background: This study aimed to evaluate the effectiveness of an experimental bioactive enamel re... more Background: This study aimed to evaluate the effectiveness of an experimental bioactive enamel resin sealer in protecting the enamel adjacent to orthodontic brackets against erosion. Methods: Orthodontic brackets (n = 50) were bonded to freshly extracted, sound maxillary premolars using Transbond™ XT Primer (3M Unitek, Monrovia, CA, USA) and Transbond Plus Color Change adhesive (3M Unitek, USA). Five experimental groups (n = 10) had the following treatments applied: a resin bioactive sealer with 45S5 bioglass, 35% by weight; a resin sealer without bioactive glass; fluoride; the orthodontic sealer, Opal Seal (Opal-Orthodontics, South Jordan, UT, USA); and, in the control group, an untreated surface. All the specimens were stored for 18 min in 1% citric acid. All the specimens were examined by SEM and electron dispersive spectroscopy (EDS). The Wilcoxon signed-rank test was used to compare the enamel surfaces covered by the sealers before and after the acid challenge. Attenuated total...
BioMed Research International
Objectives. The aim of this study was to evaluate the protective effect of using four different f... more Objectives. The aim of this study was to evaluate the protective effect of using four different fluoride bioactive enamel sealers against an acidic erosion challenge. Materials and Methods. A sample of 50 freshly extracted sound upper premolars had their buccal surface bonded to 50 orthodontic brackets using Transbond PLUS color change adhesive; the first four groups had four compositions of fluoride bioactive glasses based on 37 mol% SiO2, 43.9-53.9 mol% CaO, 6.1 mol% P2O5 and CaF2, and 0-10 mol% of Na2O applied to their surfaces and the fifth group served as control (which was not treated by any bioactive sealer). All specimens were challenged by 1% citric acid for 18 minutes which was stirred by a magnetic stirrer. The enamel surfaces next to the orthodontic brackets were examined by SEM. The Wilcoxon signed-rank test was used to compare the area covered by the fluoride bioactive pastes before/after erosion ( p < 0.05 ). Samples from the layer formed on top of the examined tee...
journal of orthodontic science, 2018
OBJECTIVE: The aim of this systematic review and meta-analysis is to quantitatively compare previ... more OBJECTIVE: The aim of this systematic review and meta-analysis is to quantitatively compare previous studies that evaluated skeletal and dentoalveolar effects of the ForsusTM Fatigue Resistance Device (FRD) in the treatment of Class II malocclusion with a matched untreated control group. MATERIALS AND METHODS: Four electronic searches PubMed, Web of Science, Cochrane Library, and Science Direct that were limited to articles on human studies comparing the effect of Forsus appliance with a matched control group in the treatment of Class II malocclusion from the year (2000–2017). An additional manual search was carried out by examining the references of the included articles, SEARCH terms included; Forsus and Class II malocclusion. The quality of the included studies was assessed using the modified methodological score for clinical trials. The data were analyzed using Michael Borenstein's Comprehensive Meta-Analysis Software (V3.3.070, Biostat, Inc., US). RESULTS: Seven studies were included comprising 273 participants (Forsus group = 142; control group = 131). The results indicated a statistical significant skeletal effect of the Forsus appliance on increasing the occlusal plane only (P < 0.001). The results also indicated a statistical significant (P < 0.001) dentoalveolar effects of the Forsus appliance on the following outcomes; protruding, proclining, and intruding lower incisors; retroclining upper incisors, distalizing and intruding upper molars, as well as reducing overjet and overbite. CONCLUSIONS: The ForsusTM showed positive effects on the maxillary incisors and first molars as well as overjet and overbite. However, multiple negative effects were reported on the occlusal plane and lower incisors that need to be considered when using such appliance in treating Class II malocclusion.
Journal of Orthodontic Science, 2015
Objectives: The objective was to compare dentofacial characteristics of Class I malocclusion in S... more Objectives: The objective was to compare dentofacial characteristics of Class I malocclusion in Saudi and Japanese adult females. Materials and Methods: Lateral cephalograms of 50 Saudi adult female and 50 Japanese adult female (18-35-year-old) were obtained. All patients were skeletal Class I, angle Class I malocclusion, arch length discrepancy (−10-10 mm), overjet (1-5 mm), overbite (1-5 mm), absence of congenital anomalies, or significant facial asymmetries or congenitally missing tooth other than the 3 rd molar and absence of temporomandibular joint problems. Patient cephalograms were traced and digitized. 16 angular measurements and 13 linear measurements of facial form were used. Results: A comparison of the vertical dimension showed that the Saudi females had a significantly larger gonial angle, a significantly larger facial angle and longer lower face height compared to the Japanese females. Dentally, Saudi females had more protruded incisors with increased distances of the posterior teeth to the palatal plane. For the soft tissue dimension, the Saudi subjects had a significantly more prominent nose, retruded lip and a more protruded chin compared with Japanese. Conclusions: There were significant differences in dentofacial morphology between Saudi and Japanese adult females. Both Asian countries have distinct cephalometric features, which should be considered as a reference in treating patients of varying ethnic backgrounds to optimize the final results.
Coatings
Background: This study aimed to evaluate the effectiveness of an experimental bioactive enamel re... more Background: This study aimed to evaluate the effectiveness of an experimental bioactive enamel resin sealer in protecting the enamel adjacent to orthodontic brackets against erosion. Methods: Orthodontic brackets (n = 50) were bonded to freshly extracted, sound maxillary premolars using Transbond™ XT Primer (3M Unitek, Monrovia, CA, USA) and Transbond Plus Color Change adhesive (3M Unitek, USA). Five experimental groups (n = 10) had the following treatments applied: a resin bioactive sealer with 45S5 bioglass, 35% by weight; a resin sealer without bioactive glass; fluoride; the orthodontic sealer, Opal Seal (Opal-Orthodontics, South Jordan, UT, USA); and, in the control group, an untreated surface. All the specimens were stored for 18 min in 1% citric acid. All the specimens were examined by SEM and electron dispersive spectroscopy (EDS). The Wilcoxon signed-rank test was used to compare the enamel surfaces covered by the sealers before and after the acid challenge. Attenuated total...
BioMed Research International
Objectives. The aim of this study was to evaluate the protective effect of using four different f... more Objectives. The aim of this study was to evaluate the protective effect of using four different fluoride bioactive enamel sealers against an acidic erosion challenge. Materials and Methods. A sample of 50 freshly extracted sound upper premolars had their buccal surface bonded to 50 orthodontic brackets using Transbond PLUS color change adhesive; the first four groups had four compositions of fluoride bioactive glasses based on 37 mol% SiO2, 43.9-53.9 mol% CaO, 6.1 mol% P2O5 and CaF2, and 0-10 mol% of Na2O applied to their surfaces and the fifth group served as control (which was not treated by any bioactive sealer). All specimens were challenged by 1% citric acid for 18 minutes which was stirred by a magnetic stirrer. The enamel surfaces next to the orthodontic brackets were examined by SEM. The Wilcoxon signed-rank test was used to compare the area covered by the fluoride bioactive pastes before/after erosion ( p < 0.05 ). Samples from the layer formed on top of the examined tee...