Nicolás Cifuentes-Araya - Academia.edu (original) (raw)
Uploads
Papers by Nicolás Cifuentes-Araya
Journal of Colloid and Interface Science, 2014
Experiments revealed the fouling nature evolutions along different electrodialysis (ED) trials, a... more Experiments revealed the fouling nature evolutions along different electrodialysis (ED) trials, and how it disappears when current pulsation acts repetitively on the interfaces of ion-exchange membranes (IEMs). Fouling was totally controlled on the diluate side of cation-exchange membrane (CEM) by the repetitive pulsation frequency of the higher on-duty ratios applied. They created steady water splitting proton-barriers that neutralized OH(-) leakage through the membrane, decreasing the interfacial pH, and fouling of the concentrate side. The anion-exchange membrane (AEM) on the diluate side was similarly protected, but it was fouled once water splitting OH(-) generation became either intense enough or excessively weak. Interestingly, amorphous magnesium hydroxide (AMH) stemmed on the CEM-diluate side from brucite under intense water splitting OH(-) generation, and/or strong OH(-) leakage electromigration through the membrane. Water dissociation and overlimiting current regimes triggered drastic water molecule removal from crystal lattices through an accelerated cascade water splitting reaction. Also, amorphous calcium carbonate (ACC) appeared on CEM under intense water splitting reaction, and disappeared once intense OH(-) leakage was allowed by the water splitting proton-barrier dissipation. Our findings have implications for membrane fouling control, as well as for the understanding of the growth behavior of CaCO3 and Mg(OH)2 species on electromembrane interfaces.
Journal of Colloid and Interface Science, 2011
Pulsed electric fields (PEFs), hashed modes of current consisting in the application of a constan... more Pulsed electric fields (PEFs), hashed modes of current consisting in the application of a constant current density during a fixed time (Ton) followed by a pause lapse (Toff), were recently demonstrated as an effective alternative for mineral fouling mitigation and process intensification during electrodialysis (ED) treatments. Recent ED studies have continuously reported a considerable mineral fouling formation on ion-exchange membranes, especially during the demineralization of solutions containing a high Mg/Ca ratio and a basified concentrate solution. The aim of this study was to evaluate the process performance under two different PEF conditions on a mineral solution containing a mineral mixture giving a high Mg(2+)/Ca(2+) ratio of 2/5. Two different pause-lapse durations (PEF ratio 1 (Ton/Toff 10s/10s); PEF ratio 0.3 (Ton/Toff 10s/33.3 s)) during consecutive ED treatments and their comparison with dc current were evaluated at a current density of 40 mA/cm(2). Our results showed that PEFs resulted in an intensification of ED process, enhancing the demineralization rates (DRs), reducing the system resistance (SR), and reducing the fouling and energy consumption (EC). PEF ratio 1 was the most optimal condition among the current regimes applied, leading to faster and higher demineralization rates due to a lower fouling and with low energy consumption during all consecutive runs.
Journal of Colloid and Interface Science, 2012
The aim of this study was to reveal the mechanisms ruling a fouling growth on both sides of a CMX... more The aim of this study was to reveal the mechanisms ruling a fouling growth on both sides of a CMX-SB cation-exchange membrane (CEM), run after run during three consecutive electrodialysis (ED) treatments. A model solution containing a high magnesium/calcium ratio (2/5) was demineralized under two different pulsed electric field (PEF) on-duty ratios and dc current. The results showed a series of mechanisms ruling a multilayer mineral fouling growth and its delay by PEFs. The nature of the fouling layer, during a first run, depended on the diluate pH-value evolutions and the ion migration rates through the membrane. A subsequent multilayer fouling growth during consecutive treatments was ruled by the already formed mineral layers, where gradual sieving effects inverted the migration rates and led to a multistep crystal growth. Calcium carbonate grew on the diluate side of CEM, starting from its amorphous phase to then crystallize in a coexisting presence of aragonite and calcite. Amorphous magnesium hydroxide appeared on CEM apparently through fouling dehydration ruled by the mineral layers themselves and by overlimiting current regimes. A delayed fouling growth was observed for PEF ratio 0.3. A long pause lapse during pulse modes was demonstrated as an important parameter for fouling mitigation.
Electrodialysis (ED) has currently found many applications in numerous industrial sectors. Howeve... more Electrodialysis (ED) has currently found many applications in numerous industrial sectors. However, membrane fouling and energy consumption (EC) must yet be reduced to further intensify the process performance in terms of demineralization rate (DR) and its related operation outlays. One of the most common current problems of electromembrane processes is membrane fouling by minerals present mainly in complex physiological treated solutions such as milk or seawater. Recent attempts to induce, and thus to study this fouling problem have consisted in the ED of solutions containing high Mg /Ca + ratios at high current densities, and using basified concentrate streams. Particularly, a study showed that the application of pulsed electric fields (PEF) intensified the process and reduced cationexchange membrane (CEM) fouling when imparting PEFs of low on-duty ratios (PEF ratio 0.25 (Ton/Toff = 10 s/40s)), and using acidified concentrate solutions. However, the ED process carried-out lasted t...
Mineral fouling of cation-exchange membrane (CEM) was recently reduced by pulsed electric fields ... more Mineral fouling of cation-exchange membrane (CEM) was recently reduced by pulsed electric fields (PEFs) during the electrodialysis (ED) of solutions containing high Mg(2+)/Ca(2+) ratios. However, a fouling layer appeared on the diluate side of anion-exchange membrane (AEM) once the pause lapse surpassed certain duration. Recent studies presented a multilayer mineral growth on CEM, but the case of AEM needs yet to be cleared. The current study reveals the mechanisms involved in AEM fouling growth when applying pulse modes of current in comparison with dc current. The results showed that dc current generated steady proton barriers given by water splitting at AEM interfaces that impeded fouling on both membrane sides. The higher frequency of PEF ratio 1 (Ton/Toff=10s/10s) acted removing completely an initial mineral deposit on the concentrate side of AEM, keeping it clean after two and three consecutive runs. Particularly, an undesirable brucite layer was formed on the AEM-diluate side...
Journal of Membrane Science, 2013
Journal of Colloid and Interface Science, 2014
Experiments revealed the fouling nature evolutions along different electrodialysis (ED) trials, a... more Experiments revealed the fouling nature evolutions along different electrodialysis (ED) trials, and how it disappears when current pulsation acts repetitively on the interfaces of ion-exchange membranes (IEMs). Fouling was totally controlled on the diluate side of cation-exchange membrane (CEM) by the repetitive pulsation frequency of the higher on-duty ratios applied. They created steady water splitting proton-barriers that neutralized OH(-) leakage through the membrane, decreasing the interfacial pH, and fouling of the concentrate side. The anion-exchange membrane (AEM) on the diluate side was similarly protected, but it was fouled once water splitting OH(-) generation became either intense enough or excessively weak. Interestingly, amorphous magnesium hydroxide (AMH) stemmed on the CEM-diluate side from brucite under intense water splitting OH(-) generation, and/or strong OH(-) leakage electromigration through the membrane. Water dissociation and overlimiting current regimes triggered drastic water molecule removal from crystal lattices through an accelerated cascade water splitting reaction. Also, amorphous calcium carbonate (ACC) appeared on CEM under intense water splitting reaction, and disappeared once intense OH(-) leakage was allowed by the water splitting proton-barrier dissipation. Our findings have implications for membrane fouling control, as well as for the understanding of the growth behavior of CaCO3 and Mg(OH)2 species on electromembrane interfaces.
Journal of Colloid and Interface Science, 2011
Pulsed electric fields (PEFs), hashed modes of current consisting in the application of a constan... more Pulsed electric fields (PEFs), hashed modes of current consisting in the application of a constant current density during a fixed time (Ton) followed by a pause lapse (Toff), were recently demonstrated as an effective alternative for mineral fouling mitigation and process intensification during electrodialysis (ED) treatments. Recent ED studies have continuously reported a considerable mineral fouling formation on ion-exchange membranes, especially during the demineralization of solutions containing a high Mg/Ca ratio and a basified concentrate solution. The aim of this study was to evaluate the process performance under two different PEF conditions on a mineral solution containing a mineral mixture giving a high Mg(2+)/Ca(2+) ratio of 2/5. Two different pause-lapse durations (PEF ratio 1 (Ton/Toff 10s/10s); PEF ratio 0.3 (Ton/Toff 10s/33.3 s)) during consecutive ED treatments and their comparison with dc current were evaluated at a current density of 40 mA/cm(2). Our results showed that PEFs resulted in an intensification of ED process, enhancing the demineralization rates (DRs), reducing the system resistance (SR), and reducing the fouling and energy consumption (EC). PEF ratio 1 was the most optimal condition among the current regimes applied, leading to faster and higher demineralization rates due to a lower fouling and with low energy consumption during all consecutive runs.
Journal of Colloid and Interface Science, 2012
The aim of this study was to reveal the mechanisms ruling a fouling growth on both sides of a CMX... more The aim of this study was to reveal the mechanisms ruling a fouling growth on both sides of a CMX-SB cation-exchange membrane (CEM), run after run during three consecutive electrodialysis (ED) treatments. A model solution containing a high magnesium/calcium ratio (2/5) was demineralized under two different pulsed electric field (PEF) on-duty ratios and dc current. The results showed a series of mechanisms ruling a multilayer mineral fouling growth and its delay by PEFs. The nature of the fouling layer, during a first run, depended on the diluate pH-value evolutions and the ion migration rates through the membrane. A subsequent multilayer fouling growth during consecutive treatments was ruled by the already formed mineral layers, where gradual sieving effects inverted the migration rates and led to a multistep crystal growth. Calcium carbonate grew on the diluate side of CEM, starting from its amorphous phase to then crystallize in a coexisting presence of aragonite and calcite. Amorphous magnesium hydroxide appeared on CEM apparently through fouling dehydration ruled by the mineral layers themselves and by overlimiting current regimes. A delayed fouling growth was observed for PEF ratio 0.3. A long pause lapse during pulse modes was demonstrated as an important parameter for fouling mitigation.
Electrodialysis (ED) has currently found many applications in numerous industrial sectors. Howeve... more Electrodialysis (ED) has currently found many applications in numerous industrial sectors. However, membrane fouling and energy consumption (EC) must yet be reduced to further intensify the process performance in terms of demineralization rate (DR) and its related operation outlays. One of the most common current problems of electromembrane processes is membrane fouling by minerals present mainly in complex physiological treated solutions such as milk or seawater. Recent attempts to induce, and thus to study this fouling problem have consisted in the ED of solutions containing high Mg /Ca + ratios at high current densities, and using basified concentrate streams. Particularly, a study showed that the application of pulsed electric fields (PEF) intensified the process and reduced cationexchange membrane (CEM) fouling when imparting PEFs of low on-duty ratios (PEF ratio 0.25 (Ton/Toff = 10 s/40s)), and using acidified concentrate solutions. However, the ED process carried-out lasted t...
Mineral fouling of cation-exchange membrane (CEM) was recently reduced by pulsed electric fields ... more Mineral fouling of cation-exchange membrane (CEM) was recently reduced by pulsed electric fields (PEFs) during the electrodialysis (ED) of solutions containing high Mg(2+)/Ca(2+) ratios. However, a fouling layer appeared on the diluate side of anion-exchange membrane (AEM) once the pause lapse surpassed certain duration. Recent studies presented a multilayer mineral growth on CEM, but the case of AEM needs yet to be cleared. The current study reveals the mechanisms involved in AEM fouling growth when applying pulse modes of current in comparison with dc current. The results showed that dc current generated steady proton barriers given by water splitting at AEM interfaces that impeded fouling on both membrane sides. The higher frequency of PEF ratio 1 (Ton/Toff=10s/10s) acted removing completely an initial mineral deposit on the concentrate side of AEM, keeping it clean after two and three consecutive runs. Particularly, an undesirable brucite layer was formed on the AEM-diluate side...
Journal of Membrane Science, 2013