Tijana Misic - Academia.edu (original) (raw)
Papers by Tijana Misic
Универзитет у Београду, Jun 12, 2012
Journal of Functional Biomaterials
Background: The present pilot study aimed to assess clinical and radiographic efficiencies of bov... more Background: The present pilot study aimed to assess clinical and radiographic efficiencies of bovine bone substitute (BBS) merged with hyaluronic acid (HA) in peri-implantits reconstructive surgery. Methods: Peri-implantitis (diagnosed 6.03 ± 1.61 years of implant loading) bone defects were randomly treated either with BBS plus HA (test group) or BBS alone (control group). Clinical parameters including peri-implant probing depth (PPD), bleeding on probing (BOP), implant stability (ISQ), and radiographic changes in vertical and horizontal marginal bone (MB) levels were assessed at six months postoperatively. New temporary and permanent screw-retained crowns were made at two weeks and three months postoperatively. Data were analyzed using parametric and non-parametric tests. Results: In both groups, 75% of patients and 83% of implants achieved treatment success after six months (no BOP, PPD <5 mm, and no further MB loss). Clinical outcomes improved over time within groups; however,...
Balkan Journal of Dental Medicine, 2016
Summary Implant placement in the esthetic zone is a complex procedure and requires a restoration-... more Summary Implant placement in the esthetic zone is a complex procedure and requires a restoration-driven approach. Proper selection of patients and implant together with individual assessment of the risk of esthetic complications are very important. Correct 3D-implant positioning and sufficient bone volume should provide long-term esthetic and function. Esthetic region is a zone in which expectations and possibilities collide. Clinician should bring the important decision on the appropriate time of implant placement. Immediate implant placement is particularly challenging in the esthetic zone. Patient desire for reduced treatment time should be weighed against the possible risk factors. Protocol of immediate implant placement in conditions of unfavourable gingival biotypes, the lack of bone or soft tissue in patients with a high smile line lead to esthetic failure which is very important in the esthetic region.
Annals of Anatomy - Anatomischer Anzeiger, 2015
Journal of Oral Implantology, 2021
The aim was to: (1) compare changes among primary and secondary implant stability between immedia... more The aim was to: (1) compare changes among primary and secondary implant stability between immediate and early loaded implants in edentulous maxilla, (2) evaluate oral health-related quality of life (OHRQoL), and (3) determine patient satisfaction with 6 implant supported fixed full-arch dentures. A prospective, randomized controlled clinical trial was conducted on 24 edentulous maxilla patients. The BLT SLActive implants in 12 patients were immediately loaded with temporary restorations while 12 patients did not receive temporary restorations. Definitive (final) dentures were delivered to all patients after 6 weeks. Stability of the implants were assessed by insertion torque (IT) and resonance frequency analysis (RFA). Oral Health Impact Profile-19 (OHIP-19) questionnaire was used to evaluate OHRQoL and a visual analogue scale (VAS) was used for patient satisfaction. The IT value of implants assigned for immediate and early loading group was 27.17 ± 9.55 Ncm and 25.01 ± 11.06 Ncm, r...
Clinical Oral Investigations
Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and Endodontology, 2011
Vojnosanitetski pregled, 2016
Background/Aim. During drilling implant sites, mechanical energy is converted into thermal one re... more Background/Aim. During drilling implant sites, mechanical energy is converted into thermal one resulting in transient rise in temperature of surrounding bone. The temperature of 47?C exeeding one minute impairs osseointegration, compromises mechanical properties of the local bone and could cause early implant failure. This in vitro study aimed to assess the effect of surgical drill guide and temperature of irrigans on thermal changes of the local bone during drilling implant sites, and to test the influence of irrigans temperature on the temperature of surgical drill guide. Methods. A total of 48 specimens obtained from bovine ribs were randomly allocated to four experimental conditions according to the 2 x 2 factorial design: drill guide (with or without) and saline (at 25?C or 5?C). Real-time infrared thermography was used as a method for temperature measurement. The primary outcome was bone temperature change during drilling implant sites measured at 3 osteotomy depths, whereas t...
Clinical Implant Dentistry and Related Research, 2015
European journal of oral implantology, 2012
The aim of this 1-year prospective cohort study was to evaluate the outcomes and complications of... more The aim of this 1-year prospective cohort study was to evaluate the outcomes and complications of immediately loaded mini dental implants used for stabilizing mandibular overdentures in edentulous patients wearing conventional complete dentures. Thirty patients received mandibular conventional complete dentures that were subsequently retained by 4 immediately loaded mini dental implants placed in the interforaminal region. Overdenture success, implant success and biological and prosthetic complications were evaluated after the first year of service. Quality of life using the Oral Heath Impact Profile (OHIP)- EDENT test, satisfaction with dental prosthesis and chewing efficiency using questionnaires and a Visual Analogue Scale (VAS) were evaluated twice: after they had received mandibular complete dentures, and again after they had received mandibular overdentures. After 1 year, no overdenture failed and 2 implants did not osseointegrate, resulting in a 98.3% success rate for loaded ...
Vojnosanitetski pregled, 2014
Background/Aim. The modification of implant surfaces could affect mechanical implant stability as... more Background/Aim. The modification of implant surfaces could affect mechanical implant stability as well as dynamics and quality of peri-implant bone healing. The aim of this 3-month experimental study in dogs was to investigate implant stability, marginal bone levels and bone tissue response to zirconia dental implants with two laser-micro-grooved intraosseous surfaces in comparison with nongrooved sandblasted zirconia and sandblasted, high-temperature etched titanium implants. Methods. Implant surface characterization was performed using optical interferometric profilometry and energy dispersive X-ray spectroscopy. A total of 96 implants (4 mm in diameter and 10 mm in length) were inserted randomly in both sides of the lower jaw of 12 Fox Hound dogs divided into groups of 24 each: the control (titanium), the group A (sandblasted zirconia), the group B (sandblasted zirconia plus microgrooved neck) and the group C (sandblasted zirconia plus all microgrooved). All the implants were imm...
Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and Endodontology, 2011
Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and Endodontology, 2011
Clinical Oral Implants Research, 2013
Clinical Oral Implants Research, 2014
Clinical Oral Implants Research, 2013
Clinical Implant Dentistry and Related Research, 2014
Clinical Implant Dentistry and Related Research, 2013
Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and Endodontology, 2011
Универзитет у Београду, Jun 12, 2012
Journal of Functional Biomaterials
Background: The present pilot study aimed to assess clinical and radiographic efficiencies of bov... more Background: The present pilot study aimed to assess clinical and radiographic efficiencies of bovine bone substitute (BBS) merged with hyaluronic acid (HA) in peri-implantits reconstructive surgery. Methods: Peri-implantitis (diagnosed 6.03 ± 1.61 years of implant loading) bone defects were randomly treated either with BBS plus HA (test group) or BBS alone (control group). Clinical parameters including peri-implant probing depth (PPD), bleeding on probing (BOP), implant stability (ISQ), and radiographic changes in vertical and horizontal marginal bone (MB) levels were assessed at six months postoperatively. New temporary and permanent screw-retained crowns were made at two weeks and three months postoperatively. Data were analyzed using parametric and non-parametric tests. Results: In both groups, 75% of patients and 83% of implants achieved treatment success after six months (no BOP, PPD <5 mm, and no further MB loss). Clinical outcomes improved over time within groups; however,...
Balkan Journal of Dental Medicine, 2016
Summary Implant placement in the esthetic zone is a complex procedure and requires a restoration-... more Summary Implant placement in the esthetic zone is a complex procedure and requires a restoration-driven approach. Proper selection of patients and implant together with individual assessment of the risk of esthetic complications are very important. Correct 3D-implant positioning and sufficient bone volume should provide long-term esthetic and function. Esthetic region is a zone in which expectations and possibilities collide. Clinician should bring the important decision on the appropriate time of implant placement. Immediate implant placement is particularly challenging in the esthetic zone. Patient desire for reduced treatment time should be weighed against the possible risk factors. Protocol of immediate implant placement in conditions of unfavourable gingival biotypes, the lack of bone or soft tissue in patients with a high smile line lead to esthetic failure which is very important in the esthetic region.
Annals of Anatomy - Anatomischer Anzeiger, 2015
Journal of Oral Implantology, 2021
The aim was to: (1) compare changes among primary and secondary implant stability between immedia... more The aim was to: (1) compare changes among primary and secondary implant stability between immediate and early loaded implants in edentulous maxilla, (2) evaluate oral health-related quality of life (OHRQoL), and (3) determine patient satisfaction with 6 implant supported fixed full-arch dentures. A prospective, randomized controlled clinical trial was conducted on 24 edentulous maxilla patients. The BLT SLActive implants in 12 patients were immediately loaded with temporary restorations while 12 patients did not receive temporary restorations. Definitive (final) dentures were delivered to all patients after 6 weeks. Stability of the implants were assessed by insertion torque (IT) and resonance frequency analysis (RFA). Oral Health Impact Profile-19 (OHIP-19) questionnaire was used to evaluate OHRQoL and a visual analogue scale (VAS) was used for patient satisfaction. The IT value of implants assigned for immediate and early loading group was 27.17 ± 9.55 Ncm and 25.01 ± 11.06 Ncm, r...
Clinical Oral Investigations
Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and Endodontology, 2011
Vojnosanitetski pregled, 2016
Background/Aim. During drilling implant sites, mechanical energy is converted into thermal one re... more Background/Aim. During drilling implant sites, mechanical energy is converted into thermal one resulting in transient rise in temperature of surrounding bone. The temperature of 47?C exeeding one minute impairs osseointegration, compromises mechanical properties of the local bone and could cause early implant failure. This in vitro study aimed to assess the effect of surgical drill guide and temperature of irrigans on thermal changes of the local bone during drilling implant sites, and to test the influence of irrigans temperature on the temperature of surgical drill guide. Methods. A total of 48 specimens obtained from bovine ribs were randomly allocated to four experimental conditions according to the 2 x 2 factorial design: drill guide (with or without) and saline (at 25?C or 5?C). Real-time infrared thermography was used as a method for temperature measurement. The primary outcome was bone temperature change during drilling implant sites measured at 3 osteotomy depths, whereas t...
Clinical Implant Dentistry and Related Research, 2015
European journal of oral implantology, 2012
The aim of this 1-year prospective cohort study was to evaluate the outcomes and complications of... more The aim of this 1-year prospective cohort study was to evaluate the outcomes and complications of immediately loaded mini dental implants used for stabilizing mandibular overdentures in edentulous patients wearing conventional complete dentures. Thirty patients received mandibular conventional complete dentures that were subsequently retained by 4 immediately loaded mini dental implants placed in the interforaminal region. Overdenture success, implant success and biological and prosthetic complications were evaluated after the first year of service. Quality of life using the Oral Heath Impact Profile (OHIP)- EDENT test, satisfaction with dental prosthesis and chewing efficiency using questionnaires and a Visual Analogue Scale (VAS) were evaluated twice: after they had received mandibular complete dentures, and again after they had received mandibular overdentures. After 1 year, no overdenture failed and 2 implants did not osseointegrate, resulting in a 98.3% success rate for loaded ...
Vojnosanitetski pregled, 2014
Background/Aim. The modification of implant surfaces could affect mechanical implant stability as... more Background/Aim. The modification of implant surfaces could affect mechanical implant stability as well as dynamics and quality of peri-implant bone healing. The aim of this 3-month experimental study in dogs was to investigate implant stability, marginal bone levels and bone tissue response to zirconia dental implants with two laser-micro-grooved intraosseous surfaces in comparison with nongrooved sandblasted zirconia and sandblasted, high-temperature etched titanium implants. Methods. Implant surface characterization was performed using optical interferometric profilometry and energy dispersive X-ray spectroscopy. A total of 96 implants (4 mm in diameter and 10 mm in length) were inserted randomly in both sides of the lower jaw of 12 Fox Hound dogs divided into groups of 24 each: the control (titanium), the group A (sandblasted zirconia), the group B (sandblasted zirconia plus microgrooved neck) and the group C (sandblasted zirconia plus all microgrooved). All the implants were imm...
Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and Endodontology, 2011
Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and Endodontology, 2011
Clinical Oral Implants Research, 2013
Clinical Oral Implants Research, 2014
Clinical Oral Implants Research, 2013
Clinical Implant Dentistry and Related Research, 2014
Clinical Implant Dentistry and Related Research, 2013
Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and Endodontology, 2011