Iman Vali - Academia.edu (original) (raw)

Uploads

Papers by Iman Vali

Research paper thumbnail of Anesthesia management in a patient with bladder perforation during TURP with 980 nm diode laser: A case report

Research paper thumbnail of Surface Activation of NiTi Alloy by Using Electrochemical Process for Biomimetic Deposition of Hydroxyapatite Coating (TECHNICAL NOTE)

International Journal of Engineering, 2014

Electrochemical depositions of calcium phosphate (Ca-P) film on NiTi alloy in concentrated simula... more Electrochemical depositions of calcium phosphate (Ca-P) film on NiTi alloy in concentrated simulated body flood (SBF×5) were carried out by cathodic polarization. The Ca-P layer was successfully deposited on Ni-Ti alloy substrate under 10mA/cm2 current density for 2 hours at room temperature. Then, in order to investigate the bioactivity of the pre-calcified samples, they were immersed in SBF for 1 and 3 days. The microstructure, composition and bioactivity of the coatings were evaluated by using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) techniques. Results showed that the activation of the surface of the NiTi alloy by electrochemical process can significantly enhance the biomimetic deposition during time. On the other hand, by increasing immersion time of pre-calcified samples in SBF from 1 to 3 days, the biomimetic coating uniformly covered the surface of the sample. The rati...

Research paper thumbnail of Anesthesia management in a patient with bladder perforation during TURP with 980 nm diode laser: A case report

Research paper thumbnail of Surface Activation of NiTi Alloy by Using Electrochemical Process for Biomimetic Deposition of Hydroxyapatite Coating (TECHNICAL NOTE)

International Journal of Engineering, 2014

Electrochemical depositions of calcium phosphate (Ca-P) film on NiTi alloy in concentrated simula... more Electrochemical depositions of calcium phosphate (Ca-P) film on NiTi alloy in concentrated simulated body flood (SBF×5) were carried out by cathodic polarization. The Ca-P layer was successfully deposited on Ni-Ti alloy substrate under 10mA/cm2 current density for 2 hours at room temperature. Then, in order to investigate the bioactivity of the pre-calcified samples, they were immersed in SBF for 1 and 3 days. The microstructure, composition and bioactivity of the coatings were evaluated by using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) techniques. Results showed that the activation of the surface of the NiTi alloy by electrochemical process can significantly enhance the biomimetic deposition during time. On the other hand, by increasing immersion time of pre-calcified samples in SBF from 1 to 3 days, the biomimetic coating uniformly covered the surface of the sample. The rati...

Log In