William Walter - Academia.edu (original) (raw)

Papers by William Walter

The Journal of Arthroplasty, 2020

The COVID-19 pandemic has caused us all to stop our normal activities and consider how we can saf... more The COVID-19 pandemic has caused us all to stop our normal activities and consider how we can safely return to caring for our patients. There are many common practices (such as an increased use of personal protective equipment) which we are all familiar with that can be easily incorporated into our daily routines. Other actions, such as cleaning more surfaces with solutions such as dilute povidone iodine or changing the air filtration systems used within operating room theaters, may require more extensive efforts on our behalf. In this article, we have attempted to highlight some of the changes that arthroplasty surgeons may need to instigate when we are able to resume elective joint arthroplasty procedures in an effort to disrupt the chain of pathogen transfer.

World Journal of Orthopedics, 2015

Squeaking is a well-recognized complication for hardon-hard bearings. The nature of squeaking is ... more Squeaking is a well-recognized complication for hardon-hard bearings. The nature of squeaking is not yet completely understood however it is considered a multifactorial phenomenon. Patient, implant, and surgical factors play a role in squeaking. It is believed that mechanisms damaging the fluid film lubrication in which these bearings function optimally have a critical role. Such mechanisms include edge loading, stripe wear, impingement, third body particles and ceramic fracture. The resonance of metallic parts can produce noise in the human audible range hence the implant metallurgic composition and design may play a role. Implant positioning can facilitate impingement and edge loading enhancing the occurrence of squeaking. The recent introduction of large heads (> 36 mm) 4 th generation ceramic-on-ceramic bearing may accentuate the conditions facilitating noise formation; however the current literature is insufficient. Clinically, squeaking may manifest in extreme hip positions or during normal gait cycle however it is rarely associated with pain. Evaluations of patients with squeaking include clinical and radiographic assessments. Computer tomography is recommended as it can better reveal ceramic breakage and implant malposition. The treatments for most squeaking patients include reassurance and activity modification. However for some, noise can be a problem, requiring further surgical intervention. In the occurrence of ceramic fracture, implant failure, extreme components malposition, instability and impingement, surgery should be advised. This review will aim to discuss the current literature regarding squeaking.

The Journal of Bone and Joint Surgery. British volume, 2012

This systematic review of the literature summarises the clinical experience with ceramic-on-ceram... more This systematic review of the literature summarises the clinical experience with ceramic-on-ceramic hip bearings over the past 40 years and discusses the concerns that exist in relation to the bearing combination. Loosening, fracture, liner chipping on insertion, liner canting and dissociation, edge-loading and squeaking have all been reported, and the relationship between these issues and implant design and surgical technique is investigated. New design concepts are introduced and analysed with respect to previous clinical experience.

Surgical technology international, 2002

Articles in the literature about hydroxyapatite-coated hip prostheses show both the clinical and ... more Articles in the literature about hydroxyapatite-coated hip prostheses show both the clinical and radiological results are extremely satisfactory in the short and medium term. They bear out the reliability, constancy, and durability of bio-active fixation. As in the case of cemented prostheses, results are tempered by the emergence of complications linked with the particles produced by polyethylene wear, a particular cause of osteolysis in the femur or acetabulum. The ABG II HA hip prosthesis was designed with the aim of reducing this type of complication while maintaining the principle of bio-active fixation. Implantation of the system is subject to certain requirements; in particular, a preoperative radiologic assessment is required and the surgical technique must be strictly followed to optimize the biomechanical functioning of the implanted hip.

Cureus, 2017

The accuracy of cup position in total hip arthroplasty is essential for a satisfactory result as ... more The accuracy of cup position in total hip arthroplasty is essential for a satisfactory result as malpositioning increases the risk of complications including dislocation, high wear rate, loosening, squeaking, edge loading, impingement and ultimately failure. We studied 166 patients in a single-surgeon-series of matched cohorts of patients who underwent total hip arthroplasties. Four separate groups were identified comprising of the posterior approach +/-navigation and the direct anterior approach +/-navigation. We found a significant difference between the direct anterior navigated group and the posterior non-navigated group for both anteversions (P < 0.05, confidence interval (CI)-3.86 to-1.73) and inclination (P < 0.05, CI-3.08 to-1.08). Almost, 72% of anterior navigated patients fell within 5 o of the navigation software set target cup position of 45 o inclination and 20 o anteversion and 100% were within 10 o. Only 30% of posterior non-navigated were within 5 o of both anteversion and inclination and 73% were within 10 o. There was also a significant difference between the direct anterior navigated and nonnavigated group with respect to anteversion only (p < 0.05, CI 1.50 to 1.30). There were no other significant differences between approaches +/-navigation. The direct anterior approach allows ease of access to both anterior-superior iliac spines for navigation and a supine patient allows anteversion and inclination to be measured in the frontal plane. We conclude that the direct anterior approach with navigation improves the accuracy of cup position compared to the conventional posterior approach without navigation.

The Journal of bone and joint surgery. British volume, 2012

We report a case of a male patient presenting with bilateral painful but apparently well-position... more We report a case of a male patient presenting with bilateral painful but apparently well-positioned and -fixed large-diameter metal-on-metal hip replacements four years post-operatively. Multiple imaging modes revealed a thick-walled, cystic expansile mass in communication with the hip joint (a pseudotumour). Implant retrieval analysis and tissue culture eliminated high bearing wear or infection as causes for the soft-tissue reaction, but noted marked corrosion of the modular neck taper adaptor and corrosion products in the tissues. Therefore, we believe corrosion products from the taper caused by mismatch of the implant components led to pseudotumour formation requiring revision.

The Bone & Joint Journal, 2014

We report on 397 consecutive revision total hip replacements in 371 patients with a mean clinical... more We report on 397 consecutive revision total hip replacements in 371 patients with a mean clinical and radiological follow-up of 12.9 years (10 to 17.7). The mean age at surgery was 69 years (37 to 93). A total of 28 patients (8%) underwent further revision, including 16 (4%) femoral components. In all 223 patients (56%, 233 hips) died without further revision and 20 patients (5%, 20 hips) were lost to follow-up. Of the remaining patients, 209 (221 hips) were available for clinical assessment and 194 (205 hips) for radiological review at mean follow-up of 12.9 years (10 to 17.7). The mean Harris Hip Score improved from 58.7 (11 to 92) points to 80.7 (21 to 100) (p < 0.001) and the mean Merle d’Aubigné and Postel hip scores at final follow-up were 4.9 (2 to 6), 4.5 (2 to 6) and 4.3 (2 to 6), respectively for pain, mobility and function. Radiographs showed no lucencies around 186 (90.7%) femoral stems with stable bony ingrowth seen in 199 stems (97%). The survival of the S-ROM femo...

Seminars in Arthroplasty, 2013

In Australia, one quarter of our population is obese, and over half is overweight, with the upwar... more In Australia, one quarter of our population is obese, and over half is overweight, with the upward trend predicted to continue to increase for the next 20 years or so. This summary paper looks at the influence of obesity on the outcome of total joint arthroplasty, including our own experience in particular with 535 consecutive primary cementless total knee replacements. We found obesity makes the surgery more difficult and patients get poorer range of flexion. They do however get good pain relief, and in the medium term, results are similar to non-obese patients.

The bone & joint journal, 2014

We describe the clinical and radiological results of cementless primary total hip replacement (TH... more We describe the clinical and radiological results of cementless primary total hip replacement (THR) in 25 patients (18 women and seven men; 30 THRs) with severe developmental dysplasia of the hip (DDH). Their mean age at surgery was 47 years (23 to 89). In all, 21 hips had Crowe type III dysplasia and nine had Crowe type IV. Cementless acetabular components with standard polyethylene liners were introduced as close to the level of the true acetabulum as possible. The modular cementless S-ROM femoral component was used with a low resection of the femoral neck. A total of 21 patients (25 THRs) were available for review at a mean follow-up of 18.7 years (15.8 to 21.8). The mean modified Harris hip score improved from 46 points pre-operatively to 90 at final follow up (p < 0.001). A total of 15 patients (17 THRs; 57%) underwent revision of the acetabular component at a mean of 14.6 years (7 to 20.8), all for osteolysis. Two patients (two THRs) had symptomatic loosening. No patient un...

HSS Journal ®, 2012

Background: The incidence of hip replacements in the younger patient is ever increasing. With thi... more Background: The incidence of hip replacements in the younger patient is ever increasing. With this in mind, improving the longevity of hip arthroplasties is paramount. Alumina ceramic is a promising bearing surface due to its low wear rate and biological inertness. Purpose: This study aims to review our experience with ceramic-on-ceramic total hip arthroplasty, reporting on the need for revision as well as the cause of failure. Our secondary purpose is to review our experience with the phenomenon of squeaking analysing and its effect on clinical outcome with specific emphasis on component positioning. Also reported are the results of our retrieval analysis of explanted components documenting the wear rate and our analysis of strip wear. Methods: A consecutive series of 301 primary cementless alumina-on-alumina total hip arthroplasties at a minimum of 10 years follow-up was reviewed. These arthroplasties all had third-generation ceramic-on-ceramic bearings performed through a posterior approach with repair of capsule and external rotators to bone. We analysed hips both clinically and radiographically. Analysis of wear in 62 ceramic bearings was performed using a Roundtest RA300 machine (Mitutoyo; Andover, UK), which has an accuracy of 0.01 μm. Results: Overall, the survival rate of the implants was 98% at 10 years. No ceramic fractures were encountered in this study. Seventy-four patients reported squeaking hips, and two cases were revised due to squeaking (0.6%). No failures were related to bearing wear. Conclusions: We believe that ceramic-on-ceramic is a safe bearing coupling with excellent survivorship at 10 years.

The Journal of Bone and Joint Surgery. British volume, 2011

This multicentre study analysed 12 alumina ceramic-on-ceramic components retrieved from squeaking... more This multicentre study analysed 12 alumina ceramic-on-ceramic components retrieved from squeaking total hip replacements after a mean of 23 months in situ (11 to 61). The rates and patterns of wear seen in these squeaking hips were compared with those seen in matched controls using retrieval data from 33 ‘silent’ hip replacements with similar ceramic bearings. All 12 bearings showed evidence characteristic of edge-loading wear. The median rate of volumetric wear was 3.4 mm3/year for the acetabular component, 2.9 mm3/year on the femoral heads and 6.3 mm3/year for head and insert combined. This was up to 45 times greater than that of previously reported silent ceramic-on-ceramic retrievals. The rate of wear seen in ceramic components revised for squeaking hips appears to be much greater than in that seen in retrievals from ‘silent’ hips.

The Bone & Joint Journal, 2013

We report the clinical and radiological outcomes of a series of contemporary cementless ceramic-o... more We report the clinical and radiological outcomes of a series of contemporary cementless ceramic-on-ceramic total hip replacements (THRs) at ten years in patients aged ≤ 55 years of age. Pre- and post-operative activity levels are described. A total of 120 consecutive ceramic cementless THRs were performed at a single centre in 110 patients from 1997 to 1999. The mean age of the patients at operation was 45 years (20 to 55). At ten years, four patients had died and six were lost to follow-up, comprising ten hips. The mean post-operative Harris hip score was 94.7 (55 to 100). Radiological analysis was undertaken in 90 available THRs of the surviving 106 hips at final review: all had evidence of stable bony ingrowth, with no cases of osteolysis. Wear was undetectable. There were four revisions. The survival for both components with revision for any cause as an endpoint was 96.5% (95% confidence interval 94.5 to 98.7). The mean modified University of California, Los Angeles activity lev...

We investigated factors that were thought to be associated with an increased incidence of squeaki... more We investigated factors that were thought to be associated with an increased incidence of squeaking of ceramic-on-ceramic total hip replacements. Between June 1997 and December 2008 the three senior authors implanted 2406 primary total hip replacements with a ceramic-on-ceramic bearing surface. The mean follow-up was 10.6 years.The diagnosis was primary osteoarthritis in each case, and no patient had undergone previous surgery to the hip. We identified 74 squeaking hips (73 patients) giving an incidence of 3.1% at a mean follow-up of 9.5 years (4.1 to 13.3). Taller, heavier and younger patients were significantly more likely to have hips that squeaked. Squeaking hips had a significantly higher range of post-operative internal (p = 0.001) and external rotation (p = 0.003) compared with silent hips. Patients with squeaking hips had significantly higher activity levels (p = 0.009). A squeaking hip was not associated with a significant difference in patient satisfaction (p = 0.24) or Harris hip score (p = 0.34). Four implant position factors enabled good prediction of squeaking. These were high acetabular component inclination, high femoral offset, lateralisation of the hip centre and either high or low acetabular component anteversion. This is the largest study to date to examine patient factors and implant position factors that predispose to squeaking of a ceramic-on-ceramic hip. The results suggest that factors which increase the mechanical forces across the hip joint and factors which increase the risk of neck-to-rim impingement, and therefore edge-loading, are those that predispose to squeaking.

The practice of removing a well-fixed cementless femoral component is associated with high morbid... more The practice of removing a well-fixed cementless femoral component is associated with high morbidity. Ceramic bearing couples are low wearing and their use minimises the risk of subsequent further revision due to the production of wear debris. A total of 165 revision hip replacements were performed, in which a polyethylene-lined acetabular component was revised to a new acetabular component with a ceramic liner, while retaining the well-fixed femoral component. A titanium sleeve was placed over the used femoral trunnion, to which a ceramic head was added. There were 100 alumina and 65 Delta bearing couples inserted. The mean Harris hip score improved significantly from 71.3 (9.0 to 100.0) pre-operatively to 91.0 (41.0 to 100.0) at a mean follow up of 4.8 years (2.1 to 12.5) (p < 0.001). No patients reported squeaking of the hip. There were two fractures of the ceramic head, both in alumina bearings. No liners were seen to fracture. No fractures were observed in components made of Delta ceramic. At 8.3 years post-operatively the survival with any cause of failure as the endpoint was 96.6% (95% confidence interval (CI) 85.7 to 99.3) for the acetabular component and 94.0% (95% CI 82.1 to 98.4) for the femoral component. The technique of revising the acetabular component in the presence of a well-fixed femoral component with a ceramic head placed on a titanium sleeve over the used trunnion is a useful adjunct in revision hip practice. The use of Delta ceramic is recommended.

This review aims to update the reader with current thinking and research related to the well docu... more This review aims to update the reader with current thinking and research related to the well documented phenomenon of squeaking hip arthroplasties. The etiology of squeaking is multifactorial and still not well understood. We aim to share our own experience and views on the combination of factors we believe increases the likelihood of squeaking, along with mechanisms by which the sound may be generated. Recent published findings from other groups are summarized along with an appropriate management algorithm we recommend for this cohort of patients.

We present a technique of a longitudinal posterior femorotomy that does not extend to the greater... more We present a technique of a longitudinal posterior femorotomy that does not extend to the greater trochanter leaving the abductors intact. This technique allows safe, effective removal of well-fixed proximally coated cementless femoral stems with minimal bone loss and allows revision to metaphyseal fitting stems. We present results of this technique in 18 patients with a minimum 6-year follow-up. Harris hip scores increased from 68.2 to 92.4, all stems had evidence of good bony ingrowth, no evidence of migration, all femorotomies healed and there is no evidence of stress shielding or osteolysis. None required re-revision of femoral prosthesis.

Journal of the Mechanical Behavior of Biomedical Materials, 2014

The objective of this article is to provide an up-to-date overview of zirconia-toughened alumina ... more The objective of this article is to provide an up-to-date overview of zirconia-toughened alumina (ZTA) components used in total hip arthroplasties. The structure, mechanical properties, and available data regarding the clinical performance of ZTA are summarized. The advancements that have been made in understanding the in vivo performance of ZTA are investigated. This article concludes with a discussion of gaps in the literature related to ceramic biomaterials and avenues for future research.

The Journal of Bone and Joint Surgery. British volume, 2009

Dislocation is a common reason for revision following total hip replacement. This study investiga... more Dislocation is a common reason for revision following total hip replacement. This study investigated the relationship between the bearing surface and the risk of revision due to dislocation. It was based on 110 239 primary total hip replacements with a diagnosis of osteoarthritis collected by the Australian Orthopaedic Association National Joint Replacement Registry between September 1999 and December 2007. A total of 862 (0.78%) were revised because of dislocation. Ceramic-on-ceramic bearing surfaces had a lower risk of requiring revision due to dislocation than did metal-on-polyethylene and ceramic-on-polyethylene surfaces, with a follow-up of up to seven years. However, ceramic-on-ceramic implants were more likely to have larger prosthetic heads and to have been implanted in younger patients. The size of the head of the femoral component and age are known to be independent predictors of dislocation. Therefore, the outcomes were stratified by the size of the head and age. There is...

The Journal of Bone and Joint Surgery. British volume, 2007

We studied 33 third generation, alumina ceramic-on-ceramic bearings retrieved from cementless tot... more We studied 33 third generation, alumina ceramic-on-ceramic bearings retrieved from cementless total hip replacements after more than six months in situ. Wear volume was measured with a Roundtest machine, and acetabular orientation from the anteroposterior pelvic radiograph. The overall median early wear rate was 0.1 mm3/yr for the femoral heads, and 0.04 mm3/yr for the acetabular liners. We then excluded hips where the components had migrated. In this stable subgroup of 22 bearings, those with an acetabular anteversion of < 15° (seven femoral heads) had a median femoral head wear rate of 1.2 mm3/yr, compared with 0 mm3/yr for those with an anteversion of ≥15° (15 femoral heads, p < 0.001). Even under edge loading, wear volumes with ceramic-on-ceramic bearings are small in comparison to other bearing materials. Low acetabular anteversion is associated with greater wear.

The Journal of Bone and Joint Surgery. British volume, 2009

The outcome of total hip replacement (THR) is potentially affected by the body mass index (BMI) o... more The outcome of total hip replacement (THR) is potentially affected by the body mass index (BMI) of the patient. We studied the outcome of 2026 consecutive primary cementless THRs performed for osteoarthritis. The mean follow-up was 6.3 years (0 to 11.71) and no patient was lost to follow-up for survival analysis. The patients were divided into two groups according to their BMI as follows: non-obese (BMI < 30 kg/m2) and obese (BMI ≥ 30 kg/m2). The obese patient undergoing surgery was found to be significantly younger (p < 0.001). The log-rank test for equality of survival showed no difference in the mid-term survival (p = 0.552) with an estimated survival at 11 years of 95.2% (95% CI 92.5 to 98.0) in the non-obese and 96.7% (95% CI 94.9 to 98.5) in the obese groups. The clinical and radiological outcome was determined in a case-matched study performed on 134 obese individuals closely matched with 134 non-obese controls. The non-obese group was found to have a significantly high...

The Journal of Arthroplasty, 2020

The COVID-19 pandemic has caused us all to stop our normal activities and consider how we can saf... more The COVID-19 pandemic has caused us all to stop our normal activities and consider how we can safely return to caring for our patients. There are many common practices (such as an increased use of personal protective equipment) which we are all familiar with that can be easily incorporated into our daily routines. Other actions, such as cleaning more surfaces with solutions such as dilute povidone iodine or changing the air filtration systems used within operating room theaters, may require more extensive efforts on our behalf. In this article, we have attempted to highlight some of the changes that arthroplasty surgeons may need to instigate when we are able to resume elective joint arthroplasty procedures in an effort to disrupt the chain of pathogen transfer.

World Journal of Orthopedics, 2015

Squeaking is a well-recognized complication for hardon-hard bearings. The nature of squeaking is ... more Squeaking is a well-recognized complication for hardon-hard bearings. The nature of squeaking is not yet completely understood however it is considered a multifactorial phenomenon. Patient, implant, and surgical factors play a role in squeaking. It is believed that mechanisms damaging the fluid film lubrication in which these bearings function optimally have a critical role. Such mechanisms include edge loading, stripe wear, impingement, third body particles and ceramic fracture. The resonance of metallic parts can produce noise in the human audible range hence the implant metallurgic composition and design may play a role. Implant positioning can facilitate impingement and edge loading enhancing the occurrence of squeaking. The recent introduction of large heads (> 36 mm) 4 th generation ceramic-on-ceramic bearing may accentuate the conditions facilitating noise formation; however the current literature is insufficient. Clinically, squeaking may manifest in extreme hip positions or during normal gait cycle however it is rarely associated with pain. Evaluations of patients with squeaking include clinical and radiographic assessments. Computer tomography is recommended as it can better reveal ceramic breakage and implant malposition. The treatments for most squeaking patients include reassurance and activity modification. However for some, noise can be a problem, requiring further surgical intervention. In the occurrence of ceramic fracture, implant failure, extreme components malposition, instability and impingement, surgery should be advised. This review will aim to discuss the current literature regarding squeaking.

The Journal of Bone and Joint Surgery. British volume, 2012

This systematic review of the literature summarises the clinical experience with ceramic-on-ceram... more This systematic review of the literature summarises the clinical experience with ceramic-on-ceramic hip bearings over the past 40 years and discusses the concerns that exist in relation to the bearing combination. Loosening, fracture, liner chipping on insertion, liner canting and dissociation, edge-loading and squeaking have all been reported, and the relationship between these issues and implant design and surgical technique is investigated. New design concepts are introduced and analysed with respect to previous clinical experience.

Surgical technology international, 2002

Articles in the literature about hydroxyapatite-coated hip prostheses show both the clinical and ... more Articles in the literature about hydroxyapatite-coated hip prostheses show both the clinical and radiological results are extremely satisfactory in the short and medium term. They bear out the reliability, constancy, and durability of bio-active fixation. As in the case of cemented prostheses, results are tempered by the emergence of complications linked with the particles produced by polyethylene wear, a particular cause of osteolysis in the femur or acetabulum. The ABG II HA hip prosthesis was designed with the aim of reducing this type of complication while maintaining the principle of bio-active fixation. Implantation of the system is subject to certain requirements; in particular, a preoperative radiologic assessment is required and the surgical technique must be strictly followed to optimize the biomechanical functioning of the implanted hip.

Cureus, 2017

The accuracy of cup position in total hip arthroplasty is essential for a satisfactory result as ... more The accuracy of cup position in total hip arthroplasty is essential for a satisfactory result as malpositioning increases the risk of complications including dislocation, high wear rate, loosening, squeaking, edge loading, impingement and ultimately failure. We studied 166 patients in a single-surgeon-series of matched cohorts of patients who underwent total hip arthroplasties. Four separate groups were identified comprising of the posterior approach +/-navigation and the direct anterior approach +/-navigation. We found a significant difference between the direct anterior navigated group and the posterior non-navigated group for both anteversions (P < 0.05, confidence interval (CI)-3.86 to-1.73) and inclination (P < 0.05, CI-3.08 to-1.08). Almost, 72% of anterior navigated patients fell within 5 o of the navigation software set target cup position of 45 o inclination and 20 o anteversion and 100% were within 10 o. Only 30% of posterior non-navigated were within 5 o of both anteversion and inclination and 73% were within 10 o. There was also a significant difference between the direct anterior navigated and nonnavigated group with respect to anteversion only (p < 0.05, CI 1.50 to 1.30). There were no other significant differences between approaches +/-navigation. The direct anterior approach allows ease of access to both anterior-superior iliac spines for navigation and a supine patient allows anteversion and inclination to be measured in the frontal plane. We conclude that the direct anterior approach with navigation improves the accuracy of cup position compared to the conventional posterior approach without navigation.

The Journal of bone and joint surgery. British volume, 2012

We report a case of a male patient presenting with bilateral painful but apparently well-position... more We report a case of a male patient presenting with bilateral painful but apparently well-positioned and -fixed large-diameter metal-on-metal hip replacements four years post-operatively. Multiple imaging modes revealed a thick-walled, cystic expansile mass in communication with the hip joint (a pseudotumour). Implant retrieval analysis and tissue culture eliminated high bearing wear or infection as causes for the soft-tissue reaction, but noted marked corrosion of the modular neck taper adaptor and corrosion products in the tissues. Therefore, we believe corrosion products from the taper caused by mismatch of the implant components led to pseudotumour formation requiring revision.

The Bone & Joint Journal, 2014

We report on 397 consecutive revision total hip replacements in 371 patients with a mean clinical... more We report on 397 consecutive revision total hip replacements in 371 patients with a mean clinical and radiological follow-up of 12.9 years (10 to 17.7). The mean age at surgery was 69 years (37 to 93). A total of 28 patients (8%) underwent further revision, including 16 (4%) femoral components. In all 223 patients (56%, 233 hips) died without further revision and 20 patients (5%, 20 hips) were lost to follow-up. Of the remaining patients, 209 (221 hips) were available for clinical assessment and 194 (205 hips) for radiological review at mean follow-up of 12.9 years (10 to 17.7). The mean Harris Hip Score improved from 58.7 (11 to 92) points to 80.7 (21 to 100) (p < 0.001) and the mean Merle d’Aubigné and Postel hip scores at final follow-up were 4.9 (2 to 6), 4.5 (2 to 6) and 4.3 (2 to 6), respectively for pain, mobility and function. Radiographs showed no lucencies around 186 (90.7%) femoral stems with stable bony ingrowth seen in 199 stems (97%). The survival of the S-ROM femo...

Seminars in Arthroplasty, 2013

In Australia, one quarter of our population is obese, and over half is overweight, with the upwar... more In Australia, one quarter of our population is obese, and over half is overweight, with the upward trend predicted to continue to increase for the next 20 years or so. This summary paper looks at the influence of obesity on the outcome of total joint arthroplasty, including our own experience in particular with 535 consecutive primary cementless total knee replacements. We found obesity makes the surgery more difficult and patients get poorer range of flexion. They do however get good pain relief, and in the medium term, results are similar to non-obese patients.

The bone & joint journal, 2014

We describe the clinical and radiological results of cementless primary total hip replacement (TH... more We describe the clinical and radiological results of cementless primary total hip replacement (THR) in 25 patients (18 women and seven men; 30 THRs) with severe developmental dysplasia of the hip (DDH). Their mean age at surgery was 47 years (23 to 89). In all, 21 hips had Crowe type III dysplasia and nine had Crowe type IV. Cementless acetabular components with standard polyethylene liners were introduced as close to the level of the true acetabulum as possible. The modular cementless S-ROM femoral component was used with a low resection of the femoral neck. A total of 21 patients (25 THRs) were available for review at a mean follow-up of 18.7 years (15.8 to 21.8). The mean modified Harris hip score improved from 46 points pre-operatively to 90 at final follow up (p < 0.001). A total of 15 patients (17 THRs; 57%) underwent revision of the acetabular component at a mean of 14.6 years (7 to 20.8), all for osteolysis. Two patients (two THRs) had symptomatic loosening. No patient un...

HSS Journal ®, 2012

Background: The incidence of hip replacements in the younger patient is ever increasing. With thi... more Background: The incidence of hip replacements in the younger patient is ever increasing. With this in mind, improving the longevity of hip arthroplasties is paramount. Alumina ceramic is a promising bearing surface due to its low wear rate and biological inertness. Purpose: This study aims to review our experience with ceramic-on-ceramic total hip arthroplasty, reporting on the need for revision as well as the cause of failure. Our secondary purpose is to review our experience with the phenomenon of squeaking analysing and its effect on clinical outcome with specific emphasis on component positioning. Also reported are the results of our retrieval analysis of explanted components documenting the wear rate and our analysis of strip wear. Methods: A consecutive series of 301 primary cementless alumina-on-alumina total hip arthroplasties at a minimum of 10 years follow-up was reviewed. These arthroplasties all had third-generation ceramic-on-ceramic bearings performed through a posterior approach with repair of capsule and external rotators to bone. We analysed hips both clinically and radiographically. Analysis of wear in 62 ceramic bearings was performed using a Roundtest RA300 machine (Mitutoyo; Andover, UK), which has an accuracy of 0.01 μm. Results: Overall, the survival rate of the implants was 98% at 10 years. No ceramic fractures were encountered in this study. Seventy-four patients reported squeaking hips, and two cases were revised due to squeaking (0.6%). No failures were related to bearing wear. Conclusions: We believe that ceramic-on-ceramic is a safe bearing coupling with excellent survivorship at 10 years.

The Journal of Bone and Joint Surgery. British volume, 2011

This multicentre study analysed 12 alumina ceramic-on-ceramic components retrieved from squeaking... more This multicentre study analysed 12 alumina ceramic-on-ceramic components retrieved from squeaking total hip replacements after a mean of 23 months in situ (11 to 61). The rates and patterns of wear seen in these squeaking hips were compared with those seen in matched controls using retrieval data from 33 ‘silent’ hip replacements with similar ceramic bearings. All 12 bearings showed evidence characteristic of edge-loading wear. The median rate of volumetric wear was 3.4 mm3/year for the acetabular component, 2.9 mm3/year on the femoral heads and 6.3 mm3/year for head and insert combined. This was up to 45 times greater than that of previously reported silent ceramic-on-ceramic retrievals. The rate of wear seen in ceramic components revised for squeaking hips appears to be much greater than in that seen in retrievals from ‘silent’ hips.

The Bone & Joint Journal, 2013

We report the clinical and radiological outcomes of a series of contemporary cementless ceramic-o... more We report the clinical and radiological outcomes of a series of contemporary cementless ceramic-on-ceramic total hip replacements (THRs) at ten years in patients aged ≤ 55 years of age. Pre- and post-operative activity levels are described. A total of 120 consecutive ceramic cementless THRs were performed at a single centre in 110 patients from 1997 to 1999. The mean age of the patients at operation was 45 years (20 to 55). At ten years, four patients had died and six were lost to follow-up, comprising ten hips. The mean post-operative Harris hip score was 94.7 (55 to 100). Radiological analysis was undertaken in 90 available THRs of the surviving 106 hips at final review: all had evidence of stable bony ingrowth, with no cases of osteolysis. Wear was undetectable. There were four revisions. The survival for both components with revision for any cause as an endpoint was 96.5% (95% confidence interval 94.5 to 98.7). The mean modified University of California, Los Angeles activity lev...

We investigated factors that were thought to be associated with an increased incidence of squeaki... more We investigated factors that were thought to be associated with an increased incidence of squeaking of ceramic-on-ceramic total hip replacements. Between June 1997 and December 2008 the three senior authors implanted 2406 primary total hip replacements with a ceramic-on-ceramic bearing surface. The mean follow-up was 10.6 years.The diagnosis was primary osteoarthritis in each case, and no patient had undergone previous surgery to the hip. We identified 74 squeaking hips (73 patients) giving an incidence of 3.1% at a mean follow-up of 9.5 years (4.1 to 13.3). Taller, heavier and younger patients were significantly more likely to have hips that squeaked. Squeaking hips had a significantly higher range of post-operative internal (p = 0.001) and external rotation (p = 0.003) compared with silent hips. Patients with squeaking hips had significantly higher activity levels (p = 0.009). A squeaking hip was not associated with a significant difference in patient satisfaction (p = 0.24) or Harris hip score (p = 0.34). Four implant position factors enabled good prediction of squeaking. These were high acetabular component inclination, high femoral offset, lateralisation of the hip centre and either high or low acetabular component anteversion. This is the largest study to date to examine patient factors and implant position factors that predispose to squeaking of a ceramic-on-ceramic hip. The results suggest that factors which increase the mechanical forces across the hip joint and factors which increase the risk of neck-to-rim impingement, and therefore edge-loading, are those that predispose to squeaking.

The practice of removing a well-fixed cementless femoral component is associated with high morbid... more The practice of removing a well-fixed cementless femoral component is associated with high morbidity. Ceramic bearing couples are low wearing and their use minimises the risk of subsequent further revision due to the production of wear debris. A total of 165 revision hip replacements were performed, in which a polyethylene-lined acetabular component was revised to a new acetabular component with a ceramic liner, while retaining the well-fixed femoral component. A titanium sleeve was placed over the used femoral trunnion, to which a ceramic head was added. There were 100 alumina and 65 Delta bearing couples inserted. The mean Harris hip score improved significantly from 71.3 (9.0 to 100.0) pre-operatively to 91.0 (41.0 to 100.0) at a mean follow up of 4.8 years (2.1 to 12.5) (p < 0.001). No patients reported squeaking of the hip. There were two fractures of the ceramic head, both in alumina bearings. No liners were seen to fracture. No fractures were observed in components made of Delta ceramic. At 8.3 years post-operatively the survival with any cause of failure as the endpoint was 96.6% (95% confidence interval (CI) 85.7 to 99.3) for the acetabular component and 94.0% (95% CI 82.1 to 98.4) for the femoral component. The technique of revising the acetabular component in the presence of a well-fixed femoral component with a ceramic head placed on a titanium sleeve over the used trunnion is a useful adjunct in revision hip practice. The use of Delta ceramic is recommended.

This review aims to update the reader with current thinking and research related to the well docu... more This review aims to update the reader with current thinking and research related to the well documented phenomenon of squeaking hip arthroplasties. The etiology of squeaking is multifactorial and still not well understood. We aim to share our own experience and views on the combination of factors we believe increases the likelihood of squeaking, along with mechanisms by which the sound may be generated. Recent published findings from other groups are summarized along with an appropriate management algorithm we recommend for this cohort of patients.

We present a technique of a longitudinal posterior femorotomy that does not extend to the greater... more We present a technique of a longitudinal posterior femorotomy that does not extend to the greater trochanter leaving the abductors intact. This technique allows safe, effective removal of well-fixed proximally coated cementless femoral stems with minimal bone loss and allows revision to metaphyseal fitting stems. We present results of this technique in 18 patients with a minimum 6-year follow-up. Harris hip scores increased from 68.2 to 92.4, all stems had evidence of good bony ingrowth, no evidence of migration, all femorotomies healed and there is no evidence of stress shielding or osteolysis. None required re-revision of femoral prosthesis.

Journal of the Mechanical Behavior of Biomedical Materials, 2014

The objective of this article is to provide an up-to-date overview of zirconia-toughened alumina ... more The objective of this article is to provide an up-to-date overview of zirconia-toughened alumina (ZTA) components used in total hip arthroplasties. The structure, mechanical properties, and available data regarding the clinical performance of ZTA are summarized. The advancements that have been made in understanding the in vivo performance of ZTA are investigated. This article concludes with a discussion of gaps in the literature related to ceramic biomaterials and avenues for future research.

The Journal of Bone and Joint Surgery. British volume, 2009

Dislocation is a common reason for revision following total hip replacement. This study investiga... more Dislocation is a common reason for revision following total hip replacement. This study investigated the relationship between the bearing surface and the risk of revision due to dislocation. It was based on 110 239 primary total hip replacements with a diagnosis of osteoarthritis collected by the Australian Orthopaedic Association National Joint Replacement Registry between September 1999 and December 2007. A total of 862 (0.78%) were revised because of dislocation. Ceramic-on-ceramic bearing surfaces had a lower risk of requiring revision due to dislocation than did metal-on-polyethylene and ceramic-on-polyethylene surfaces, with a follow-up of up to seven years. However, ceramic-on-ceramic implants were more likely to have larger prosthetic heads and to have been implanted in younger patients. The size of the head of the femoral component and age are known to be independent predictors of dislocation. Therefore, the outcomes were stratified by the size of the head and age. There is...

The Journal of Bone and Joint Surgery. British volume, 2007

We studied 33 third generation, alumina ceramic-on-ceramic bearings retrieved from cementless tot... more We studied 33 third generation, alumina ceramic-on-ceramic bearings retrieved from cementless total hip replacements after more than six months in situ. Wear volume was measured with a Roundtest machine, and acetabular orientation from the anteroposterior pelvic radiograph. The overall median early wear rate was 0.1 mm3/yr for the femoral heads, and 0.04 mm3/yr for the acetabular liners. We then excluded hips where the components had migrated. In this stable subgroup of 22 bearings, those with an acetabular anteversion of < 15° (seven femoral heads) had a median femoral head wear rate of 1.2 mm3/yr, compared with 0 mm3/yr for those with an anteversion of ≥15° (15 femoral heads, p < 0.001). Even under edge loading, wear volumes with ceramic-on-ceramic bearings are small in comparison to other bearing materials. Low acetabular anteversion is associated with greater wear.

The Journal of Bone and Joint Surgery. British volume, 2009

The outcome of total hip replacement (THR) is potentially affected by the body mass index (BMI) o... more The outcome of total hip replacement (THR) is potentially affected by the body mass index (BMI) of the patient. We studied the outcome of 2026 consecutive primary cementless THRs performed for osteoarthritis. The mean follow-up was 6.3 years (0 to 11.71) and no patient was lost to follow-up for survival analysis. The patients were divided into two groups according to their BMI as follows: non-obese (BMI < 30 kg/m2) and obese (BMI ≥ 30 kg/m2). The obese patient undergoing surgery was found to be significantly younger (p < 0.001). The log-rank test for equality of survival showed no difference in the mid-term survival (p = 0.552) with an estimated survival at 11 years of 95.2% (95% CI 92.5 to 98.0) in the non-obese and 96.7% (95% CI 94.9 to 98.5) in the obese groups. The clinical and radiological outcome was determined in a case-matched study performed on 134 obese individuals closely matched with 134 non-obese controls. The non-obese group was found to have a significantly high...