Arman Zarei | University of Malaya, Malaysia (original) (raw)

Papers by Arman Zarei

Laser Physics Letters, 2014

We present new red optical spectra of V592 Cas aimed at exploring the properties of the outflow o... more We present new red optical spectra of V592 Cas aimed at exploring the properties of the outflow of this system in a spectral region where the underlying white dwarf and the accretion disk do not contribute significantly to the observed absorption components of the Hα and He i line profiles. We use the Hα emission line to study the wind, which appears as pronounced blueshifted P Cygni absorption troughs whose low velocity end contaminates the blue side of the emission line profile. The wind appears to be episodic in nature, with multiple events reaching velocities of 5000 km s −1 in Hα. Similar (but weaker) wind signatures appear in the He i 5876 Å line but are absent in He i 6678 Å. Our data suggest that during wind episodes the wind is phase dependent and is visible for half of the orbit of the system. Considering that V592 Cas is viewed almost faceon, the symmetry axis of the outflow cannot be orthogonal to the disk and/or the outflow must have some other inherent asymmetry in outflow geometry. A possible origin of the wind is in a disk hotspot, either at the initial impact point of the accretion stream on the disk edge or as a result of disk overflow (similar to SW Sextantis stars). Simultaneous optical photometry during one night of our spectroscopic observations indicate that there is no clear relationship between the optical brightness variations and the strength of the outflow in this system.

A new approach for filtering an optical band-pass in optical amplifier is proposed using a macro ... more A new approach for filtering an optical band-pass in optical amplifier is proposed using a macro bending. The proposed filter leverages the bending loss of higher order modes at shorter wavelengths. At longer wavelengths, the filter increases fiber's bending loss as the fundamental mode 'tail' is leak out from the cladding. The combination of wavelength dependent loss at longer and shorter wavelength gives rise to the optical band-pass filter characteristic inside the fiber. The simulated spectral response of the filter is found to be in good agreement with the experimental results. Subsequently, the proposed optical band-pass filter is applied in Thulium-doped fiber amplifiers (TDFA) system for gain and noise figure enhancements. The filter functions to suppress both the amplified spontaneous emission (ASE) at 800 nm and 1800 nm wavelength regions and thus improves both gain and noise figure performances in S-band region. By bending of the gain medium, gain and noise figure of the TDFA are improved by about 2 dB and 0.5 dB respectively, within a wavelength region from 1440 and 1500 nm when the 1050 nm pump power is fixed at 250 mW.

Journal of Optical Communications and Networking, 2013

A return-to-zero differential quadrature phase-shift keying (DQPSK) modulation scheme is proposed... more A return-to-zero differential quadrature phase-shift keying (DQPSK) modulation scheme is proposed for all-optical orthogonal frequency-division multiplexing transmission systems. The system uses coupler-based inverse fast Fourier transform/fast Fourier transform to support a 700 km single-mode fiber link and a transmission rate of 40 Gb∕s without any nonlinear compensation. The performance of the proposed system is evaluated using simulation and four performance measures are obtained, namely, the eye diagram, the eyeopening penalty (EOP), the power spectral broadening, and the bit error rate (BER). The effect of self-phase modulation is taken into account in the performance evaluation. In addition, the performance of the proposed system is compared to that of a traditional one adopting a non-return-to-zero DQPSK scheme. Our results reveal that the proposed system outperforms the traditional one in all four aforementioned performance measures, yet the spectral efficiency is almost preserved. Specifically, for an input average power of 12 dBm, a reduction in both the required optical-signal-to-noise ratio of about 4 dB (to achieve a BER of 10 −6 ) and the EOP of about 5 dB are reported when adopting the proposed system, as compared to the traditional one.

Chinese Physics Letters, 2014

ABSTRACT A simple mode-locked erbium-doped fiber laser (EDFL) with three switchable operation sta... more ABSTRACT A simple mode-locked erbium-doped fiber laser (EDFL) with three switchable operation states is proposed and demonstrated based on nonlinear polarization rotation. The EDFL generates a stable square pulse at a third harmonic pulse repetition rate of 87 kHz as the 1480 nm pump power increases from the threshold of 17.5 mW to 34.3 mW. The square pulse duration increases from 105 ns to 245 ns as the pump power increases within this region. The pulse operation switches to the second operation state as the pump power is varied from 48.2 mW to 116.7 mW. The laser operates at a fundamental repetition rate of 29 kHz with a fixed pulse width of 8.5 μs within the pump power region. At a pump power of 116.7 mW, the average output power is 3.84 mW, which corresponds to the pulse energy of 131.5 nJ. When the pump power continues to increase, the pulse train experiences unstable oscillation before it reaches the third stable operation state within a pump power region of 138.9 mW to 145.0 mW. Within this region, the EDFL produces a fixed pulse width of 2.8 μs and a harmonic pulse repetition rate of 58 kHz.

Journal of Modern Optics, 2014

ABSTRACT A simple multi-wavelength passively Q-switched Erbium-doped fiber laser (EDFL) is demons... more ABSTRACT A simple multi-wavelength passively Q-switched Erbium-doped fiber laser (EDFL) is demonstrated using low-cost multi-walled carbon nanotubes (MWCNTs)-based saturable absorber, which is prepared using polyvinyl alcohol as a host polymer. The multi-wavelength operation is achieved based on non-linear polarization rotation effect by incorporating 50 m long photonic crystal fiber in the ring cavity. The EDFL produces a stable multi-wavelength comb spectrum for more than 14 lines with a fixed spacing of 0.48 nm. The laser also demonstrates a stable pulse train with the repetition rate increasing from 14.9 to 25.4 kHz as the pump power increases from the threshold power of 69.0 mW to the maximum pump power of 133.8 mW. The minimum pulse width of 4.4 μs was obtained at the maximum pump power of 133.8 mW while the highest energy of 0.74 nJ was obtained at the pump power of 69.0 mW.

Chinese Physics Letters, 2014

IET Optoelectronics, 2015

ABSTRACT A Q-switched Brillouin fibre laser (BFL) is successfully demonstrated using multi-walled... more ABSTRACT A Q-switched Brillouin fibre laser (BFL) is successfully demonstrated using multi-walled carbon nanotubes (MWCNTs) embedded in polyvinyl alcohol (PVA) film as a passive saturable absorber (SA) for the first time. The SA is obtained by sandwiching the developed MWCNTs-PVA film between two FC/PC fibre connectors after depositing index-matching gel onto the fibre ends. The proposed Q-switched BFL incorporates a 5 km long dispersion shifted fibre in a ring cavity structure to generate Stokes shifted by 0.08 nm from the Brillouin pump wavelength. The BFL starts to generate a Q-switching pulse train at threshold pump power of 5 dBm. As the BP power is varied from 5.0 to 6.0 dBm, the repetition rate of the Q-switched BFL exhibits an increasing trend from 27.75 to 30.21 kHz, whereas the pulse width exhibits a decreasing trend from 3.25 mu s to 1.11 mu s. The maximum pulse energy of 0.13 nJ is obtained at maximum BP power of 6.0 dBm. Dear readers, If you like to have the full paper, please send an email request to pejtdr_fkej@um.edu.my. We will email the paper to you. Thank You.

Selected Topics on Optical Amplifiers in Present Scenario, 2012

IEEE Journal of Quantum Electronics, 2012

Due to the tremendous growth in applications for fiber laser in medical science, sensor solution,... more Due to the tremendous growth in applications for fiber laser in medical science, sensor solution, and light detection and ranging system at 1.8 to 2-μm region, more research efforts have been directed toward developing highly efficient broadband fiber amplifiers in this range. In order to amplify this region, Thulium-Bismuth-doped fiber amplifier (TBDFA) is proposed in conjunction with 800-nm pumping. Optimal Thulium ion concentration of 4.17 × 1026 ion/m3 and Bismuth ion concentration of 2.08 × 1026 ion/m3 together with low phonon energy of germanate glass lead to the highest energy transfer rates. Effective energy transfer mechanism from Bismuth to Thulium in addition to the cross relaxation process between Thulium ions results in higher amplification, efficiency, and super broadband amplification in TBDFA. We analytically solve the rate equations of TBDFA including the effect of energy transfer in order to calculate the broadband amplifier gain.

Laser Physics Letters, 2014

We present new red optical spectra of V592 Cas aimed at exploring the properties of the outflow o... more We present new red optical spectra of V592 Cas aimed at exploring the properties of the outflow of this system in a spectral region where the underlying white dwarf and the accretion disk do not contribute significantly to the observed absorption components of the Hα and He i line profiles. We use the Hα emission line to study the wind, which appears as pronounced blueshifted P Cygni absorption troughs whose low velocity end contaminates the blue side of the emission line profile. The wind appears to be episodic in nature, with multiple events reaching velocities of 5000 km s −1 in Hα. Similar (but weaker) wind signatures appear in the He i 5876 Å line but are absent in He i 6678 Å. Our data suggest that during wind episodes the wind is phase dependent and is visible for half of the orbit of the system. Considering that V592 Cas is viewed almost faceon, the symmetry axis of the outflow cannot be orthogonal to the disk and/or the outflow must have some other inherent asymmetry in outflow geometry. A possible origin of the wind is in a disk hotspot, either at the initial impact point of the accretion stream on the disk edge or as a result of disk overflow (similar to SW Sextantis stars). Simultaneous optical photometry during one night of our spectroscopic observations indicate that there is no clear relationship between the optical brightness variations and the strength of the outflow in this system.

A new approach for filtering an optical band-pass in optical amplifier is proposed using a macro ... more A new approach for filtering an optical band-pass in optical amplifier is proposed using a macro bending. The proposed filter leverages the bending loss of higher order modes at shorter wavelengths. At longer wavelengths, the filter increases fiber's bending loss as the fundamental mode 'tail' is leak out from the cladding. The combination of wavelength dependent loss at longer and shorter wavelength gives rise to the optical band-pass filter characteristic inside the fiber. The simulated spectral response of the filter is found to be in good agreement with the experimental results. Subsequently, the proposed optical band-pass filter is applied in Thulium-doped fiber amplifiers (TDFA) system for gain and noise figure enhancements. The filter functions to suppress both the amplified spontaneous emission (ASE) at 800 nm and 1800 nm wavelength regions and thus improves both gain and noise figure performances in S-band region. By bending of the gain medium, gain and noise figure of the TDFA are improved by about 2 dB and 0.5 dB respectively, within a wavelength region from 1440 and 1500 nm when the 1050 nm pump power is fixed at 250 mW.

Journal of Optical Communications and Networking, 2013

A return-to-zero differential quadrature phase-shift keying (DQPSK) modulation scheme is proposed... more A return-to-zero differential quadrature phase-shift keying (DQPSK) modulation scheme is proposed for all-optical orthogonal frequency-division multiplexing transmission systems. The system uses coupler-based inverse fast Fourier transform/fast Fourier transform to support a 700 km single-mode fiber link and a transmission rate of 40 Gb∕s without any nonlinear compensation. The performance of the proposed system is evaluated using simulation and four performance measures are obtained, namely, the eye diagram, the eyeopening penalty (EOP), the power spectral broadening, and the bit error rate (BER). The effect of self-phase modulation is taken into account in the performance evaluation. In addition, the performance of the proposed system is compared to that of a traditional one adopting a non-return-to-zero DQPSK scheme. Our results reveal that the proposed system outperforms the traditional one in all four aforementioned performance measures, yet the spectral efficiency is almost preserved. Specifically, for an input average power of 12 dBm, a reduction in both the required optical-signal-to-noise ratio of about 4 dB (to achieve a BER of 10 −6 ) and the EOP of about 5 dB are reported when adopting the proposed system, as compared to the traditional one.

Chinese Physics Letters, 2014

ABSTRACT A simple mode-locked erbium-doped fiber laser (EDFL) with three switchable operation sta... more ABSTRACT A simple mode-locked erbium-doped fiber laser (EDFL) with three switchable operation states is proposed and demonstrated based on nonlinear polarization rotation. The EDFL generates a stable square pulse at a third harmonic pulse repetition rate of 87 kHz as the 1480 nm pump power increases from the threshold of 17.5 mW to 34.3 mW. The square pulse duration increases from 105 ns to 245 ns as the pump power increases within this region. The pulse operation switches to the second operation state as the pump power is varied from 48.2 mW to 116.7 mW. The laser operates at a fundamental repetition rate of 29 kHz with a fixed pulse width of 8.5 μs within the pump power region. At a pump power of 116.7 mW, the average output power is 3.84 mW, which corresponds to the pulse energy of 131.5 nJ. When the pump power continues to increase, the pulse train experiences unstable oscillation before it reaches the third stable operation state within a pump power region of 138.9 mW to 145.0 mW. Within this region, the EDFL produces a fixed pulse width of 2.8 μs and a harmonic pulse repetition rate of 58 kHz.

Journal of Modern Optics, 2014

ABSTRACT A simple multi-wavelength passively Q-switched Erbium-doped fiber laser (EDFL) is demons... more ABSTRACT A simple multi-wavelength passively Q-switched Erbium-doped fiber laser (EDFL) is demonstrated using low-cost multi-walled carbon nanotubes (MWCNTs)-based saturable absorber, which is prepared using polyvinyl alcohol as a host polymer. The multi-wavelength operation is achieved based on non-linear polarization rotation effect by incorporating 50 m long photonic crystal fiber in the ring cavity. The EDFL produces a stable multi-wavelength comb spectrum for more than 14 lines with a fixed spacing of 0.48 nm. The laser also demonstrates a stable pulse train with the repetition rate increasing from 14.9 to 25.4 kHz as the pump power increases from the threshold power of 69.0 mW to the maximum pump power of 133.8 mW. The minimum pulse width of 4.4 μs was obtained at the maximum pump power of 133.8 mW while the highest energy of 0.74 nJ was obtained at the pump power of 69.0 mW.

Chinese Physics Letters, 2014

IET Optoelectronics, 2015

ABSTRACT A Q-switched Brillouin fibre laser (BFL) is successfully demonstrated using multi-walled... more ABSTRACT A Q-switched Brillouin fibre laser (BFL) is successfully demonstrated using multi-walled carbon nanotubes (MWCNTs) embedded in polyvinyl alcohol (PVA) film as a passive saturable absorber (SA) for the first time. The SA is obtained by sandwiching the developed MWCNTs-PVA film between two FC/PC fibre connectors after depositing index-matching gel onto the fibre ends. The proposed Q-switched BFL incorporates a 5 km long dispersion shifted fibre in a ring cavity structure to generate Stokes shifted by 0.08 nm from the Brillouin pump wavelength. The BFL starts to generate a Q-switching pulse train at threshold pump power of 5 dBm. As the BP power is varied from 5.0 to 6.0 dBm, the repetition rate of the Q-switched BFL exhibits an increasing trend from 27.75 to 30.21 kHz, whereas the pulse width exhibits a decreasing trend from 3.25 mu s to 1.11 mu s. The maximum pulse energy of 0.13 nJ is obtained at maximum BP power of 6.0 dBm. Dear readers, If you like to have the full paper, please send an email request to pejtdr_fkej@um.edu.my. We will email the paper to you. Thank You.

Selected Topics on Optical Amplifiers in Present Scenario, 2012

IEEE Journal of Quantum Electronics, 2012

Due to the tremendous growth in applications for fiber laser in medical science, sensor solution,... more Due to the tremendous growth in applications for fiber laser in medical science, sensor solution, and light detection and ranging system at 1.8 to 2-μm region, more research efforts have been directed toward developing highly efficient broadband fiber amplifiers in this range. In order to amplify this region, Thulium-Bismuth-doped fiber amplifier (TBDFA) is proposed in conjunction with 800-nm pumping. Optimal Thulium ion concentration of 4.17 × 1026 ion/m3 and Bismuth ion concentration of 2.08 × 1026 ion/m3 together with low phonon energy of germanate glass lead to the highest energy transfer rates. Effective energy transfer mechanism from Bismuth to Thulium in addition to the cross relaxation process between Thulium ions results in higher amplification, efficiency, and super broadband amplification in TBDFA. We analytically solve the rate equations of TBDFA including the effect of energy transfer in order to calculate the broadband amplifier gain.