WG1800HP2 stock -> OpenWrt (original) (raw)

WG1400HPからの差分のみなので、さっくりサポートを追加してテスト。

cwm_action_mac40to20: ht40 -> ht20

osif_vap_init_sub: IEEE80211_F_COEXT_DISABLE skip wlan_determine_cw()

mlme_create_infra_bss : Overriding HT40 channel with HT20 channel

cwm_action_mac40to20: ht40 -> ht20

osif_vap_init_sub: IEEE80211_F_COEXT_DISABLE skip wlan_determine_cw()

mlme_create_infra_bss : Overriding HT40 channel with HT20 channel

cwm_action_mac40to20: ht40 -> ht20

osif_vap_init_sub: IEEE80211_F_COEXT_DISABLE skip wlan_determine_cw()

mlme_create_infra_bss : Overriding HT40 channel with HT20 channel

cwm_action_mac40to20: ht40 -> ht20

osif_vap_init_sub: IEEE80211_F_COEXT_DISABLE skip wlan_determine_cw()

mlme_create_infra_bss : Overriding HT40 channel with HT20 channel

cwm_action_mac40to20: ht40 -> ht20

osif_vap_init_sub: IEEE80211_F_COEXT_DISABLE skip wlan_determine_cw()

mlme_create_infra_bss : Overriding HT40 channel with HT20 channel

cwm_action_mac40to20: ht40 -> ht20

osif_vap_init_sub: IEEE80211_F_COEXT_DISABLE skip wlan_determine_cw()

wmi_unified_vdev_stop_send for vap 0 (0xc02e9000) beacon buffer av_wbuf is NULL - Ignoring SWBA event STOPPED EVENT for vap 0 (0xc02e9000) OL vap_start + wmi_unified_vdev_start_send for vap 0 (0xc02e9000) OL vap_start - ol_vdev_start_resp_ev for vap 0 (0xc02e9000) ol_ath_vap_join: join operation is only for STA/IBSS mode ol_ath_wmm_update: ol_if_dfs_configure: called ol_if_dfs_configure: MKK4 domain ol_if_dfs_disable: called ol_ath_vap_set_param: VAP param is now supported param:11 value:3 wmi_unified_vdev_up_send for vap 0 (0xc02e9000) Notification to UMAC VAP layer wmi_unified_vdev_stop_send for vap 0 (0xc02e9000) STOPPED EVENT for vap 0 (0xc02e9000) OL vap_start + wmi_unified_vdev_start_send for vap 0 (0xc02e9000) OL vap_start - ol_vdev_start_resp_ev for vap 0 (0xc02e9000) ol_ath_vap_join: join operation is only for STA/IBSS mode ol_if_dfs_configure: called ol_if_dfs_configure: MKK4 domain ol_if_dfs_disable: called ol_ath_vap_set_param: VAP param is now supported param:11 value:3 wmi_unified_vdev_up_send for vap 0 (0xc02e9000) Notification to UMAC VAP layer wmi_unified_vdev_stop_send for vap 0 (0xc02e9000) STOPPED EVENT for vap 0 (0xc02e9000) OL vap_start + wmi_unified_vdev_start_send for vap 0 (0xc02e9000) OL vap_start - ol_vdev_start_resp_ev for vap 0 (0xc02e9000) ol_ath_vap_join: join operation is only for STA/IBSS mode ol_ath_wmm_update: ol_if_dfs_configure: called ol_if_dfs_configure: MKK4 domain ol_if_dfs_disable: called ol_ath_vap_set_param: VAP param is now supported param:11 value:3 wmi_unified_vdev_up_send for vap 0 (0xc02e9000) Notification to UMAC VAP layer wmi_unified_vdev_stop_send for vap 0 (0xc02e9000) STOPPED EVENT for vap 0 (0xc02e9000) OL vap_start + wmi_unified_vdev_start_send for vap 0 (0xc02e9000) OL vap_start - ol_vdev_start_resp_ev for vap 0 (0xc02e9000) ol_ath_vap_join: join operation is only for STA/IBSS mode ol_ath_wmm_update: ol_if_dfs_configure: called ol_if_dfs_configure: MKK4 domain ol_if_dfs_disable: called ol_ath_vap_set_param: VAP param is now supported param:11 value:3 wmi_unified_vdev_up_send for vap 0 (0xc02e9000) Notification to UMAC VAP layer vap_down 0 vap_down 0 FWLOG: [247547] WAL_DBGID_SECURITY_MCAST_KEY_SET ( 0x1 ) mlme_create_infra_bss : Overriding HT40 channel with HT20 channel

cwm_action_mac40to20: ht40 -> ht20

osif_vap_init_sub: IEEE80211_F_COEXT_DISABLE skip wlan_determine_cw()

vap_down 0 wmi_unified_vdev_stop_send for vap 0 (0xc02e9000) beacon buffer av_wbuf is NULL - Ignoring SWBA event STOPPED EVENT for vap 0 (0xc02e9000) vap_down 1

NetBSD/scorpimips (Amnesiac) (console)

login: s/w clock, h/w clock diff s/w real_time 1420038217 sec h/w RTC 1420038221 sec

IPL:SOFT-RESET memory test ... ok flinstall OK

boot version: 1.0.0

PKG "3x3LIGHTNING" CPU "Atheros/QCA9558" Revision 113.0 CLOCK 720.0 MHz HEAP MEMORY 262144 bytes Boot:InitFilesystem RGMII calibration GE0 ... ETH_CFG: 00028001 ETH_XMII: 96000000 phy0.0: "Atheros/AR8327(phy)" phy0.1: "Atheros/AR8327(SW)" active ch:1 now booting Firmware ... loaded Firmware NEC Aterm series (QCA9558)

Calibrating SGMII SGMII cal value = 0xe

Configuring SGMII force mode SGMII_CONFIG : 0x000000a2 MR_AN_CONTROL: 0x00008140 MR_AN_CONTROL: 0x00000140

OpenWrt kernel loader for AR7XXX/AR9XXX Copyright (C) 2011 Gabor Juhos juhosg@openwrt.org Decompressing kernel... done! Starting kernel at 80060000...

[ 0.000000] Linux version 6.6.35 (musashino205@TAIHA.NET) (mips-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r26434+140-0a861a0c0f) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 Sat Jun 29 13:33:01 2024 [ 0.000000] printk: bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc) [ 0.000000] MIPS: machine is NEC Aterm WG1800HP2 [ 0.000000] SoC: Qualcomm Atheros QCA9558 ver 1 rev 0 [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Kernel command line: rootfstype=squashfs,jffs2 [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 104372K/131072K available (6152K kernel code, 597K rwdata, 1424K rodata, 16968K init, 204K bss, 26700K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 51 [ 0.000000] CPU clock: 720.000 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5309056796 ns [ 0.000001] sched_clock: 32 bits at 360MHz, resolution 2ns, wraps every 5965232126ns [ 0.092768] Calibrating delay loop... 358.80 BogoMIPS (lpj=1794048) [ 0.227751] pid_max: default: 32768 minimum: 301 [ 0.292871] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.380340] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.481388] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.576615] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.694228] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.778076] pinctrl core: initialized pinctrl subsystem [ 0.842738] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.931435] clocksource: Switched to clocksource MIPS [ 1.002728] NET: Registered PF_INET protocol family [ 1.061265] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 1.148455] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 1.249506] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.342139] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 1.433759] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 1.518138] TCP: Hash tables configured (established 1024 bind 1024) [ 1.594264] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.672379] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.756358] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.824139] PCI: CLS 0 bytes, default 32 [ 1.901602] workingset: timestamp_bits=14 max_order=15 bucket_order=1 [ 1.980300] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.050077] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 2.380951] pinctrl-single 1804002c.pinmux: 544 pins, size 68 [ 2.450649] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 2.558123] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 2.635130] printk: console [ttyS0] disabled [ 2.686797] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A [ 2.790904] printk: console [ttyS0] enabled [ 2.790904] printk: console [ttyS0] enabled [ 2.890888] printk: bootconsole [early0] disabled [ 2.890888] printk: bootconsole [early0] disabled [ 3.022765] spi-nor spi0.0: mx25l12805d (16384 Kbytes) [ 3.084391] 4 fixed-partitions partitions found on MTD device spi0.0 [ 3.160399] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions [ 3.239516] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions [ 3.318894] Creating 4 MTD partitions on "spi0.0": [ 3.376191] 0x000000000000-0x000000020000 : "bootloader" [ 3.442842] 0x000000020000-0x000000030000 : "config" [ 3.504204] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions [ 3.583712] 0x000000030000-0x000000040000 : "art" [ 3.642351] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions [ 3.721848] 0x000000040000-0x000001000000 : "firmware" [ 4.166812] switch0: Atheros AR8327 rev. 4 switch registered on mdio.0 [ 4.890916] ag71xx 19000000.eth: connected to PHY at mdio.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316] [ 5.015422] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii [ 5.442155] ag71xx 1a000000.eth: connected to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY] [ 5.550065] eth1: Atheros AG71xx at 0xba000000, irq 5, mode: sgmii [ 5.624385] i2c_dev: i2c /dev entries driver [ 5.677726] NET: Registered PF_INET6 protocol family [ 5.744258] Segment Routing with IPv6 [ 5.788152] In-situ OAM (IOAM) with IPv6 [ 5.835257] NET: Registered PF_PACKET protocol family [ 5.895730] 8021q: 802.1Q VLAN Support v1.8 [ 5.961557] PCI host bridge to bus 0000:00 [ 6.010503] pci_bus 0000:00: root bus resource [mem 0x10000000-0x11ffffff] [ 6.092744] pci_bus 0000:00: root bus resource [io 0x0000] [ 6.159410] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 6.254212] pci 0000:00:00.0: [168c:003c] type 00 class 0x028000 [ 6.326061] pci 0000:00:00.0: reg 0x10: [mem 0x10000000-0x101fffff 64bit] [ 6.407311] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 6.487600] pci 0000:00:00.0: supports D1 [ 6.535576] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 6.605694] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 6.684855] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x101fffff 64bit] [ 6.772311] pci 0000:00:00.0: BAR 6: assigned [mem 0x10200000-0x1020ffff pref] [ 6.859849] pca953x 0-0020: supply vcc not found, using dummy regulator [ 6.939282] pca953x 0-0020: using no AI [ 6.988346] i2c-gpio i2c: using lines 20 (SDA) and 19 (SCL) [ 7.095903] clk: Disabling unused clocks [ 7.205482] Freeing unusedrnel image (mem) memory: 68K [ 7.266915] This architect does not haernel memory tection. [ 7.332214] Run /init as process [ 8.055375] init: Console alive [ 8.093294] init: - watchd- [ 8.387249] usbcore: regied new deviceiver usbusbfs[ 8.332126] usbcore: regied new interf driver hubc/les-boot.d/* [ 8.445601] gpio_button_houg: loading of-tree modulaints kernel[ 8.523431] ehci-platform 00000.usb: EHost Controll [ 8.580800] ehci-platform 00000.usb: neSB bus regisd, assigned bnumber 1 [ 8.659239] ehci-platform00000.usb: ir4, io mem 0x0000 [ 8.751454] ehci-platform 00000.usb: U.0 started, E 1.00 [ 8.816389] hub 1-0:1.0: Uhub found [ 8.856299] hub 1-0:1.0: rt detected [ 8.901752] kmodloader: doloading kernodules from //modules-boo* [ 8.984301] init: - preini [ 9.231536] usb 1-1: new h-speed USB de number 2 us ehci-platfo[ 9.501952] hub 1-1:1.0: Uhub found [ 9.560999] hub 1-1:1.0: 4rts detected[ 10.851469] random: crng i done [ 12.520174] eth1: link up 00Mbps/Full ex) Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 14.732912] eth1: link dow[ 14.780307] procd: - early [ 14.812006] procd: - watch - [ 14.846768] procd: Watchdoas previouslset the syste[ 15.465544] procd: - watch - [ 15.500278] procd: Watchdoas previouslset the syste[ 15.553777] procd: - ubus[ 15.638257] procd: - init Please press Enter to activate this console. [ 16.465642] kmodloader: long kernel mos from /etc/mles.d/* [ 17.581463] Loading moduleackported frinux version 6.15-0-g51f3515c4 [ 17.657457] Backport generd by backporit 193becf2 [ 18.184591] PPP generic drr version 2. [ 18.332865] NET: RegistereF_PPPOX proto family [ 18.462467] urngd: v1.0.2 rted. [ 18.551860] ath10k 6.7 dri, optimized CT firmware, bing pci dev 0x3c. [ 18.734450] ath10k_pci 0000:00.0: pci legacy oper_imode 1 irq_m0 reset_mode [ 22.915158] ath10k_pci 0000:00.0: qca9hw2.0 target 100016c chip0x043202ff su000:0000 [ 23.006567] ath10k_pci 000:00.0: kconfdebug 0 debu1 tracing 0 d1 testmode 0[ 23.088758] ath10k_pci 0000:00.0: firm ver 10.1-ct-__fW-022-eca8 api 2 featu wmi-10.x,hai-mgmt-tx,mfpstatus-noack-10.x-CT,ratek-CT,txrate-et-temp-CT,tx-CT,cust-staT,retry-gt2-Cxrate2-CT,be-cb-CT,wmi-bl-ack-CT crc34cf97f [ 24.024759] ath10k_pci 0000:00.0: boarle api 1 bmi_N/A crc32 be08 [ 25.051821] ath10k_pci 0000:00.0: 10.1 init: vdevs: peers: 127d: 256 [ 25.138099] ath10k_pci 0000:00.0: wmi t 'P 128 V 8 10' [ 25.199774] ath10k_pci 0000:00.0: wmi t 'msdu-desc:24 sw-crypt0ct-sta: 0' [ 25.278114] ath10k_pci 000:00.0: wmi pt 'alloc rem984 iram: 386 [ 25.395987] ath10k_pci 0000:00.0: htt-2.1 wmi-op 2 -op 2 cal nvmax-sta 128 r0 hwcrypto 1[ 25.487798] ath10k_pci 000:00.0: NOTE:irmware DBGLutput disablen debug_mask10000000 [ 25.826208] ieee80211 phy1theros AR955v:0 mem=0x884fa, irq=16 [ 25.931843] kmodloader: doloading kernodules from //modules.d/*[ 87.665347] eth1: link up 00Mbps/Full ex) [ 87.770407] br-lan: port h1.1) enteredsabled state[ 87.825608] eth1.1: enterllmulticast m [ 87.874198] ag71xx 1a00000th eth1: ent allmulticastde [ 87.934879] eth1.1: entereromiscuous mo [ 87.979666] ag71xx 1a00000th eth1: ent promiscuous e [ 88.141128] br-lan: port h1.1) enteredrwarding sta[ 88.316582] Atheros AR82168236/AR8316 .0:00: Port 1 up [ 88.378373] Atheros AR82168236/AR8316 .0:00: Port 3 up [ 88.441511] eth0: link up 00Mbps/Full ex)

BusyBox v1.36.1 (2024-06-29 13:33:01 UTC) built-in shell (ash)

| |.-----.-----.-----.| | | |.----.| |_ | - || _ | -| || | | || || | |__|| |||||_||| |_| |__| W I R E L E S S F R E E D O M

OpenWrt SNAPSHOT, r26812+25-75081235b8

=== WARNING! ===================================== There is no root password defined on this device! Use the "passwd" command to set up a new password in order to prevent unauthorized SSH logins.

root@OpenWrt:/# ls -al /tmp/ drwxrwxrwt 16 root root 460 Jun 30 06:28 . drwxr-xr-x 1 root root 0 Jan 1 1970 .. drwx------ 2 root root 40 Jun 29 13:34 .uci ---------- 1 root root 0 Jun 30 06:25 .ujailnoafile -rw-r--r-- 1 root root 4 Jun 29 13:35 TZ -rw-r--r-- 1 root root 926 Jan 1 1970 board.json -rw-r--r-- 1 root root 0 Jun 29 13:35 dhcp.leases drwxr-xr-x 2 root root 40 Jun 29 13:35 dnsmasq.d drwxr-xr-x 3 root root 80 Jun 30 06:25 etc drwxr-xr-x 2 root root 60 Jun 30 06:25 hosts drwxr-xr-x 3 root root 60 Jun 29 13:35 lib drwxrwxrwt 2 root root 380 Jun 29 13:35 lock drwxr-xr-x 2 root root 80 Jun 29 13:34 log -rw-r--r-- 1 root root 6816547 Jun 30 06:28 openwrt-ath79-generic-nec_wg1800hp2-squashfs-sysupgrade.bin drwxr-xr-x 2 root root 40 Jan 1 1970 overlay -rw-r--r-- 1 root root 47 Jun 30 06:25 resolv.conf drwxr-xr-x 2 root root 60 Jun 29 13:35 resolv.conf.d drwxr-xr-x 7 root root 260 Jun 30 06:27 run drwxrwxrwt 2 root root 40 Jun 29 13:35 shm drwxr-xr-x 2 root root 80 Jun 30 06:26 state drwxr-xr-x 2 root root 80 Jan 1 1970 sysinfo drwxr-xr-x 2 root root 40 Jun 29 13:34 tmp -rw-r--r-- 1 root root 129776 Jun 30 06:28 u-boot.bin root@OpenWrt:/# mtd write /tmp/u-boot.bin bootloader Unlocking bootloader ...

Writing from /tmp/u-boot.bin to bootloader ...
root@OpenWrt:/# sysupgrade /tmp/openwrt-ath79-generic-nec_wg1800hp2-squashfs-sys upgrade.bin Cannot save config while running from ramdisk. Sun Jun 30 06:19:08 UTC 2024 upgrade: Commencing upgrade. Closing all shell sessions. Command failed: Connection faileWatchdog handover: fd=3

Unlocking firmware ...

Writing from to firmware ... Appending jffs2 data from /tmp/sysupgrade.tgz to firmware.. .File /tmp/sysupgrade.tgz does not exist
Sun Jun 30 06:20:25 UTC 2024 upgrade: Upgrade completed **:&+?3 30 06:20:26 UTC 2024 upg[ 344.295117] eboot: Restag system '3 <--- U-Boot, シリアルコンソールのbaudrateが9600bpsから115200bpsに切り替わる

          <--- 以下115200に切り替えた場合

U-Boot 2024.07-rc5+ (Jun 29 2024 - 22:35:55 +0900)

DRAM: 128 MiB Core: 5 devices, 4 uclasses, devicetree: separate Loading Environment from ... OK In: uart@18020000 Out: uart@18020000 Err: uart@18020000 Hit any key to stop autoboot: 0

Booting kernel from Legacy Image at 9f040000 ...

Image Name: MIPS OpenWrt Linux-6.6.35 Image Type: MIPS Linux Kernel Image (uncompressed) Data Size: 2543189 Bytes = 2.4 MiB Load Address: 80060000 Entry Point: 80060000 Verifying Checksum ... OK Loading Kernel Image to 80060000 NEC Aterm series (QCA9558)

Calibrating SGMII SGMII cal value = 0xe

Configuring SGMII force mode SGMII_CONFIG : 0x000000a2 MR_AN_CONTROL: 0x00008140 MR_AN_CONTROL: 0x00000140

OpenWrt kernel loader for AR7XXX/AR9XXX Copyright (C) 2011 Gabor Juhos juhosg@openwrt.org Decompressing kernel... done! Starting kernel at 80060000...

[ 0.000000] Linux version 6.6.35 (musashino205@TAIHA.NET) (mips-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r26434+140-0a861a0c0f) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 Sat Jun 29 13:33:01 2024 [ 0.000000] printk: bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc) [ 0.000000] MIPS: machine is NEC Aterm WG1800HP2 [ 0.000000] SoC: Qualcomm Atheros QCA9558 ver 1 rev 0 [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=132768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2 [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 120116K/131072K available (6152K kernel code, 597K rwdata, 1424K rodata, 1224K init, 204K bss, 10956K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 51 [ 0.000000] CPU clock: 720.000 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5309056796 ns [ 0.000001] sched_clock: 32 bits at 360MHz, resolution 2ns, wraps every 5965232126ns [ 0.008743] Calibrating delay loop... 358.80 BogoMIPS (lpj=1794048) [ 0.075720] pid_max: default: 32768 minimum: 301 [ 0.090737] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.098914] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.115885] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.128924] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.139938] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.150172] pinctrl core: initialized pinctrl subsystem [ 0.158171] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.182432] clocksource: Switched to clocksource MIPS [ 0.198894] NET: Registered PF_INET protocol family [ 0.204610] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.213485] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.222968] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.231614] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.240178] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.248078] TCP: Hash tables configured (established 1024 bind 1024) [ 0.255308] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.262659] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.271141] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.277534] PCI: CLS 0 bytes, default 32 [ 0.286286] workingset: timestamp_bits=14 max_order=15 bucket_order=1 [ 0.295019] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.301531] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.319134] pinctrl-single 1804002c.pinmux: 544 pins, size 68 [ 0.326462] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.337610] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.345717] printk: console [ttyS0] disabled [ 0.350986] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A [ 0.360774] printk: console [ttyS0] enabled [ 0.369684] printk: bootconsole [early0] disabled [ 0.398823] spi-nor spi0.0: mx25l12805d (16384 Kbytes) [ 0.404178] 4 fixed-partitions partitions found on MTD device spi0.0 [ 0.410659] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions [ 0.417415] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions [ 0.424399] Creating 4 MTD partitions on "spi0.0": [ 0.429276] 0x000000000000-0x000000020000 : "bootloader" [ 0.437620] 0x000000020000-0x000000030000 : "config" [ 0.444639] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions [ 0.451703] 0x000000030000-0x000000040000 : "art" [ 0.458744] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions [ 0.465792] 0x000000040000-0x000001000000 : "firmware" [ 0.473360] 2 uimage-fw partitions found on MTD device firmware [ 0.479390] Creating 2 MTD partitions on "firmware": [ 0.484471] 0x000000000000-0x000000270000 : "kernel" [ 0.491270] 0x000000270000-0x000000fc0000 : "rootfs" [ 0.498033] mtd: setting mtd5 (rootfs) as root device [ 0.503279] 1 squashfs-split partitions found on MTD device rootfs [ 0.509596] 0x000000680000-0x000000fc0000 : "rootfs_data" [ 0.868634] switch0: Atheros AR8327 rev. 4 switch registered on mdio.0 [ 1.521777] ag71xx 19000000.eth: connected to PHY at mdio.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316] [ 1.532980] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii [ 1.874552] ag71xx 1a000000.eth: connected to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY] [ 1.884373] eth1: Atheros AG71xx at 0xba000000, irq 5, mode: sgmii [ 1.890999] i2c_dev: i2c /dev entries driver [ 1.895547] ath79-wdt 18060008.wdt: timeout value must be 0 < timeout < 14, using 14 [ 1.905536] NET: Registered PF_INET6 protocol family [ 1.917491] Segment Routing with IPv6 [ 1.921298] In-situ OAM (IOAM) with IPv6 [ 1.925503] NET: Registered PF_PACKET protocol family [ 1.930682] 8021q: 802.1Q VLAN Support v1.8 [ 1.960960] PCI host bridge to bus 0000:00 [ 1.965160] pci_bus 0000:00: root bus resource [mem 0x10000000-0x11ffffff] [ 1.972139] pci_bus 0000:00: root bus resource [io 0x0000] [ 1.977811] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 1.985901] pci 0000:00:00.0: [168c:003c] type 00 class 0x028000 [ 1.992030] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 1.998980] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 2.005865] pci 0000:00:00.0: supports D1 [ 2.009936] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 2.017170] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 2.023956] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x101fffff 64bit] [ 2.031400] pci 0000:00:00.0: BAR 6: assigned [mem 0x10200000-0x1020ffff pref] [ 2.039848] pca953x 0-0020: supply vcc not found, using dummy regulator [ 2.046870] pca953x 0-0020: using no AI [ 2.053930] i2c-gpio i2c: using lines 20 (SDA) and 19 (SCL) [ 2.099224] clk: Disabling unused clocks [ 2.112751] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. [ 2.124225] Freeing unused kernel image (initmem) memory: 1224K [ 2.130241] This architecture does not have kernel memory protection. [ 2.136803] Run /sbin/init as init process [ 2.140957] with arguments: [ 2.140962] /sbin/init [ 2.140968] with environment: [ 2.140972] HOME=/ [ 2.140977] TERM=linux [ 2.904291] init: Console is alive [ 2.908085] init: - watchdog - [ 4.436633] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 4.524874] usbcore: registered new interface driver usbfs [ 4.530543] usbcore: registered new interface driver hub [ 4.536066] usbcore: registered new device driver usb [ 4.545238] gpio_button_hotplug: loading out-of-tree module taints kernel. [ 4.564978] ehci-platform 1b000000.usb: EHCI Host Controller [ 4.570755] ehci-platform 1b000000.usb: new USB bus registered, assigned bus number 1 [ 4.578899] ehci-platform 1b000000.usb: irq 14, io mem 0x1b000000 [ 4.612452] ehci-platform 1b000000.usb: USB 2.0 started, EHCI 1.00 [ 4.619991] hub 1-0:1.0: USB hub found [ 4.624413] hub 1-0:1.0: 1 port detected [ 4.633525] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 4.651599] init: - preinit - [ 5.000669] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 5.422515] hub 1-1:1.0: USB hub found [ 5.490899] hub 1-1:1.0: 4 ports detected [ 7.812468] random: crng init done [ 9.900022] eth1: link up (1000Mbps/Full duplex) [ 12.151168] mount_root: jffs2 not ready yet, using temporary tmpfs overlay [ 12.162052] urandom-seed: Seed file not found (/etc/urandom.seed) [ 12.229471] eth1: link down [ 12.257819] procd: - early - [ 12.261028] procd: - watchdog - [ 12.968598] procd: - watchdog - [ 12.972703] procd: - ubus - [ 13.137559] procd: - init - [ 14.773041] kmodloader: loading kernel modules from /etc/modules.d/* [ 15.813285] Loading modules backported from Linux version v6.6.15-0-g51f354b815c4 [ 15.820894] Backport generated by backports.git 193becf2 [ 16.716568] urngd: v1.0.2 started. [ 16.773120] PPP generic driver version 2.4.2 [ 16.783556] NET: Registered PF_PPPOX protocol family [ 16.889176] ath10k 6.7 driver, optimized for CT firmware, probing pci device: 0x3c. [ 16.943270] ath10k_pci 0000:00:00.0: enabling device (0000 -> 0002) [ 16.949821] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0 [ 21.123700] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000 [ 21.133111] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0 [ 21.145101] ath10k_pci 0000:00:00.0: firmware ver 10.1-ct-8x-__fW-022-ecad3248 api 2 features wmi-10.x,has-wmi-mgmt-tx,mfp,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT crc32 3e4cf97f [ 22.037550] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08 [ 22.999824] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256 [ 23.016637] ath10k_pci 0000:00:00.0: wmi print 'P 128 V 8 T 410' [ 23.022977] ath10k_pci 0000:00:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0' [ 23.031106] ath10k_pci 0000:00:00.0: wmi print 'alloc rem: 24984 iram: 38672' [ 23.095005] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 2 htt-op 2 cal nvmem max-sta 128 raw 0 hwcrypto 1 [ 23.105197] ath10k_pci 0000:00:00.0: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000 [ 23.246365] ath: EEPROM regdomain: 0x88 [ 23.246388] ath: EEPROM indicates we should expect a direct regpair map [ 23.246401] ath: Country alpha2 being used: JP [ 23.246408] ath: Regpair used: 0x88 [ 23.340831] ath: EEPROM regdomain: 0x88 [ 23.340855] ath: EEPROM indicates we should expect a direct regpair map [ 23.340869] ath: Country alpha2 being used: JP [ 23.340877] ath: Regpair used: 0x88 [ 23.357742] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' [ 23.358595] ieee80211 phy1: Atheros AR9550 Rev:0 mem=0x7c543c70, irq=16 [ 23.398829] kmodloader: done loading kernel modules from /etc/modules.d/ [ 56.420719] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0 [ 56.452524] jffs2_build_filesystem(): unlocking the mtd device... [ 56.452568] done. [ 56.460785] jffs2_build_filesystem(): erasing all blocks after the end marker... [ 57.696283] eth1: link up (1000Mbps/Full duplex) [ 57.735472] br-lan: port 1(eth1.1) entered blocking state [ 57.740978] br-lan: port 1(eth1.1) entered disabled state [ 57.746535] eth1.1: entered allmulticast mode [ 57.750968] ag71xx 1a000000.eth eth1: entered allmulticast mode [ 57.757230] eth1.1: entered promiscuous mode [ 57.761581] ag71xx 1a000000.eth eth1: entered promiscuous mode [ 57.815052] br-lan: port 1(eth1.1) entered blocking state [ 57.820557] br-lan: port 1(eth1.1) entered forwarding state [ 58.023808] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 1 is up [ 58.030203] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 3 is up [ 58.037967] eth0: link up (1000Mbps/Full duplex) [ 127.213251] done. [ 127.215237] jffs2: notice: (2275) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 127.430860] overlayfs: upper fs does not support tmpfile.

BusyBox v1.36.1 (2024-06-29 13:33:01 UTC) built-in shell (ash)

| |.-----.-----.-----.| | | |.----.| |_ | - || _ | -| || | | || || | |__|| |||||_||| |_| |__| W I R E L E S S F R E E D O M

OpenWrt SNAPSHOT, r26812+25-75081235b8

=== WARNING! ===================================== There is no root password defined on this device! Use the "passwd" command to set up a new password in order to prevent unauthorized SSH logins.

root@OpenWrt:/# ubus call system board { "kernel": "6.6.35", "hostname": "OpenWrt", "system": "Qualcomm Atheros QCA9558 ver 1 rev 0", "model": "NEC Aterm WG1800HP2", "board_name": "nec,wg1800hp2", "rootfs_type": "squashfs", "release": { "distribution": "OpenWrt", "version": "SNAPSHOT", "revision": "r26812+25-75081235b8", "target": "ath79/generic", "description": "OpenWrt SNAPSHOT r26812+25-75081235b8" } } root@OpenWrt:/# ubus call system info { "localtime": 1719728573, "uptime": 140, "load": [ 85856, 41024, 15872 ], "memory": { "total": 124252160, "free": 78319616, "shared": 258048, "buffered": 0, "available": 65585152, "cached": 23216128 }, "root": { "total": 9472, "free": 9052, "used": 420, "avail": 9052 }, "tmp": { "total": 60668, "free": 60464, "used": 204, "avail": 60464 }, "swap": { "total": 0, "free": 0 } } root@OpenWrt:/# df -h Filesystem Size Used Available Use% Mounted on /dev/root 4.3M 4.3M 0 100% /rom tmpfs 59.2M 204.0K 59.0M 0% /tmp tmpfs 59.2M 48.0K 59.2M 0% /tmp/root tmpfs 512.0K 0 512.0K 0% /dev /dev/mtdblock6 9.3M 420.0K 8.8M 4% /overlay overlayfs:/overlay 9.3M 420.0K 8.8M 4% / root@OpenWrt:/#