PyTorch Quantization — Model Optimizer 0.27.1 (original) (raw)

Key advantages offered by ModelOpt’s PyTorch quantization:

1. Support advanced quantization formats, e.g., Block-wise Int4 and FP8.
2. Native support for LLM models in Hugging Face and NeMo.
3. Advanced Quantization algorithms, e.g., SmoothQuant, AWQ.
4. Deployment support to ONNX and NVIDIA TensorRT.

Note

ModelOpt quantization is fake quantization, which means it only simulates the low-precision computation in PyTorch. Real speedup and memory saving should be achieved by exporting the model to deployment frameworks.

Tip

This guide covers the usage of ModelOpt quantization. For details on the quantization formats and recommended use cases, please refer to Quantization Formats.

Apply Post Training Quantization (PTQ)

PTQ can be achieved with simple calibration on a small set of training or evaluation data (typically 128-512 samples) after converting a regular PyTorch model to a quantized model. The simplest way to quantize a model using ModelOpt is to use mtq.quantize().

mtq.quantize() takes a model, a quantization config and a forward loop callable as input. The quantization config specifies the layers to quantize, their quantization formats as well as the algorithm to use for calibration. Please refer to Quantization Configs for the list of quantization configs supported by default. You may also define your own quantization config as described in customizing quantizer config.

ModelOpt supports algorithms such as AWQ, SmoothQuant, SVDQuant or max for calibration. Please refer to mtq.calibratefor more details.

The forward loop is used to pass data through the model in-order to collect statistics for calibration. It should wrap around the calibration dataloader and the model.

Here is an example of performing PTQ using ModelOpt:

import modelopt.torch.quantization as mtq

Setup the model

model = get_model()

Select quantization config

config = mtq.INT8_SMOOTHQUANT_CFG

Quantization need calibration data. Setup calibration data loader

An example of creating a calibration data loader looks like the following:

data_loader = get_dataloader(num_samples=calib_size)

Define forward_loop. Please wrap the data loader in the forward_loop

def forward_loop(model): for batch in data_loader: model(batch)

Quantize the model and perform calibration (PTQ)

model = mtq.quantize(model, config, forward_loop)

To verify that the quantizer nodes are placed correctly in the model, let’s print the quantized model summary as show below:

Print quantization summary after successfully quantizing the model with mtq.quantize

This will show the quantizers inserted in the model and their configurations

mtq.print_quant_summary(model)

After PTQ, the model can be exported to ONNX with the normal PyTorch ONNX export flow.

torch.onnx.export(model, sample_input, onnx_file)

ModelOpt also supports direct export of Huggingface or Nemo LLM models to TensorRT-LLM for deployment. Please see TensorRT-LLM Deployment for more details.

Compressing model weights after quantization

ModelOpt provides a API mtq.compress() to compress the model weights after quantization. This API can be used to reduce the memory footprint of the quantized model for future evaluation or fine-tuning such as QLoRA. Note that this API only supports selected quantization formats.

After PTQ, the model can be compressed with the following code:

Compress the model

mtq.compress(model)

Quantization-aware Training (QAT)

QAT is the technique of fine-tuning a quantized model to recover model quality degradation due to quantization. While QAT requires much more compute resources than PTQ, it is highly effective in recovering model quality.

A model quantized using mtq.quantize() could be directly fine-tuned with QAT. Typically during QAT, the quantizer states are frozen and the model weights are fine-tuned.

Here is an example of performing QAT:

import modelopt.torch.quantization as mtq

Select quantization config

config = mtq.INT8_DEFAULT_CFG

Define forward loop for calibration

def forward_loop(model): for data in calib_set: model(data)

QAT after replacement of regular modules to quantized modules

model = mtq.quantize(model, config, forward_loop)

Fine-tune with original training pipeline

Adjust learning rate and training duration

train(model, train_loader, optimizer, scheduler, ...)

Tip

We recommend QAT for 10% of the original training epochs. For LLMs, we find that QAT fine-tuning for even less than 1% of the original pre-training duration is often sufficient to recover the model quality.

Storing and restoring quantized model

The model weights and quantizer states need to saved for future use or to resume training. Please see saving and restoring of ModelOpt-modified models to learn how to save and restore the quantized model.

Optimal Partial Quantization using AutoQuantize(auto_quantize)

auto_quantize or AutoQuantize is a PTQ algorithm from ModelOpt which quantizes a model by searching for the best quantization format per-layer while meeting the performance constraint specified by the user. AutoQuantize enables to trade-off model accuracy for performance. Please see auto_quantize for more details on the API usage.

Currently AutoQuantize supports only effective_bits as the performance constraint (for both weight-only quantization and weight & activation quantization). effective_bits constraint specifies the effective number of bits for the quantized model.

You may specify a effective_bits constraint such as 8.8 for partial quantization with FP8_DEFAULT_CFG.AutoQuantize will skip quantizing the most quantization sensitive layers so that the final partially quantized model’s effective bits is 8.8. This model will have a better accuracy than the model quantized with default configuration since quantization was skipped for some layers which are highly sensitive to quantization.

Here is how to perform AutoQuantize:

import modelopt.torch.quantization as mtq import modelopt.torch.opt as mto

Define the model & calibration dataloader

model = ... calib_dataloader = ...

Define forward_step function.

forward_step should take the model and data as input and return the output

def forward_step(model, data): output = model(data) return output

Define loss function which takes the model output and data as input and returns the loss

def loss_func(output, data): loss = ... return loss

Perform AutoQuantize

model, search_state_dict = mtq.auto_quantize( model, constraints = {"effective_bits": 4.8}, # supported quantization formats are listed in modelopt.torch.quantization.config.choices quantization_formats = ["NVFP4_DEFAULT_CFG", "FP8_DEFAULT_CFG", None] data_loader = calib_dataloader, forward_step=forward_step, loss_func=loss_func, ... )

Save the searched model for future use

mto.save(model, "auto_quantize_model.pt")

Advanced Topics

TensorQuantizer

Under the hood, ModelOpt mtq.quantize() insertsTensorQuantizer(quantizer modules) into the model layers like linear layer, conv layer etc. and patches their forward method to perform quantization.

The quantization parameters are as described in QuantizerAttributeConfig. They can be set at initialization by passing QuantizerAttributeConfigor later by calling TensorQuantizer.set_from_attribute_config(). If the quantization parameters are not set explicitly, the quantizer will use the default values.

Here is an example of creating a quantizer module:

from modelopt.torch.quantization.config import QuantizerAttributeConfig from modelopt.torch.quantization.nn import TensorQuantizer

Create quantizer module with default quantization parameters

quantizer = TensorQuantizer()

quant_x = quantizer(x) # Quantize input x

Create quantizer module with custom quantization parameters

Example setting for INT4 block-wise quantization

quantizer_custom = TensorQuantizer(QuantizerAttributeConfig(num_bits=4, block_sizes={-1: 128}))

Quantize input with custom quantization parameters

quant_x = quantizer_custom(x) # Quantize input x

Customize quantizer config

ModelOpt inserts input quantizer, weight quantizer and output quantizer into common layers, but by default disables the output quantizer. Expert users who want to customize the default quantizer configuration can update the config dictionary provided to mtq.quantize using wildcard or filter function match.

Here is an example of specifying a custom quantizer configuration to mtq.quantize:

Select quantization config

config = mtq.INT8_DEFAULT_CFG.copy() config["quant_cfg"]["*.bmm.output_quantizer"] = { "enable": True } # Enable output quantizer for bmm layer

Perform PTQ/QAT;

model = mtq.quantize(model, config, forward_loop)

Custom quantized module and quantizer placement

modelopt.torch.quantization has a default set of quantized modules (see modelopt.torch.quantization.nn.modules for a detailed list) and quantizer placement rules (input, output and weight quantizers). However, there might be cases where you want to define a custom quantized module and/or customize the quantizer placement.

ModelOpt provides a way to define custom quantized modules and register them with the quantization framework. This allows you to:

1. Handle unsupported modules, e.g., a subclassed Linear layer that require quantization.
2. Customize the quantizer placement, e.g., placing the quantizer in special places like the KV Cache of an Attention layer.

Here is an example of defining a custom quantized LayerNorm module:

from modelopt.torch.quantization.nn import TensorQuantizer

class QuantLayerNorm(nn.LayerNorm): def init(self, normalized_shape): super().init(normalized_shape) self._setup()

def _setup(self):
    # Method to setup the quantizers
    self.input_quantizer = TensorQuantizer()
    self.weight_quantizer = TensorQuantizer()

def forward(self, input):
    # You can customize the quantizer placement anywhere in the forward method
    input = self.input_quantizer(input)
    weight = self.weight_quantizer(self.weight)
    return F.layer_norm(input, self.normalized_shape, weight, self.bias, self.eps)

After defining the custom quantized module, you need to register this module so mtq.quantize API will automatically replace the original module with the quantized version. Note that the custom QuantLayerNorm must have a _setup method which instantiates the quantizer attributes that are called in the forward method. Here is the code to register the custom quantized module:

import modelopt.torch.quantization as mtq

Register the custom quantized module

mtq.register(original_cls=nn.LayerNorm, quantized_cls=QuantLayerNorm)

Perform PTQ

nn.LayerNorm modules in the model will be replaced with the QuantLayerNorm module

model = mtq.quantize(model, config, forward_loop)

The quantization config might need to be customized if you define a custom quantized module. Please seecustomizing quantizer config for more details.

Fast evaluation

Weight folding avoids repeated quantization of weights during each inference forward pass and speedup evaluation. This can be done with the following code:

Fold quantizer together with weight tensor

mtq.fold_weight(quantized_model)

Run model evaluation

user_evaluate_func(quantized_model)

Note

After weight folding, the model can no longer be exported to ONNX or fine-tuned with QAT.

Migrate from pytorch_quantization

ModelOpt PyTorch quantization is refactored from and extends uponpytorch_quantization.

Previous users of pytorch_quantization can simply migrate to modelopt.torch.quantization by replacing the import statements.