RS-232 and other serial ports and interfaces pinouts diagrams @ pinoutguide.com (original) (raw)
Apple Thunderbolt The Thunderbolt is the propriteary interface allows the connection of external peripherals to a computer. It combines PCI Express and DisplayPort into one serial signal alongside a DC connection for electric power, transmitted over one cable.
EIA/TIA-562 serial interface TIA/EIA-562 is a very similar to TIA/EIA-232-F with data rates up to 64 kbps supported.
EIA/TIA-694 serial interface This is an electrical standard, similar to RS-232-F, but with data rates up to 512 kbps support.
ITU-TSS V.35 interface Basically, V.35 is a high-speed serial interface designed to support both higher data rates and connectivity between DTEs or DCEs over digital lines.
RS-232 (EIA-232) serial interface RS-232 is the standard serial communications interface found on many types of equipment such as computers, modems, printers, Microcontrollers, eprom programmers, and a host of other devices. RS232 pinout may be varied.
RS-232 DB9 This RS232C DE-9 (usually miscalled DB-9) port is available in some PCs and many other devices. An RS-232 serial port was once a standard feature of a personal computer, used for connections to modems, printers, mice, data storage, uninterruptible power supplies, and other peripheral devices.
RS-422 (EIA-422) serial interface RS422 is a balanced serial interface for the transmission of digital data. The advantage of a balanced signal is the greater immunity to noise. The EIA describes RS422 as a DTE to DCE interface for point-to-point connections.
RS-449 (EIA-449) interface The RS449 interface is a generic connector specification. It´s not an actual interface. The connector pinning was originally designed to support RS422 for balanced signals, and RS423 for the unbalanced signals. And should have been the succesor of RS232.
RS-530 (EIA530) interface EIA-530, or RS-530, is a balanced serial interface standard that generally uses a 25 pin connector. The RS530 isn't an actual interfaceis, but a generic connector specification. The connector pinning can be used to support RS422, RS423, V.36/V.37/V.10/V.11 (not V.35!) and X.21 to name the most popular ones.
