Sewing Machine Repair Tips For Hardware Problems - SewGuide (original) (raw)

A Sewing machine is just that – a machine, with lots of hardware parts and sometimes software. It can develop all kinds of hardware problems in the course of its use and disuse (and misuse). So, what to do, as soon as you see something is wrong with the sewing machine?

Related post : Sewing machine parts – Names

What is wrong with your sewing machine hardware ?

When the machine stops working it can be two scenarios – either it signals the end of your sewing machine or it is all about a very simple solvable problem.

Check if the machine and the pedal are humming?.

If the pedal is not working, exchange with a foot pedal that works and see if it solves your problem.

If all else fails deduce that maybe something is wrong with the hardware inside the machine.

First 5 steps of sewing machine hardware repair

1.Evaluate the specific problem

You can first of all check out this post – What to check if sewing machine is not stitching – the basic scenarios for trouble shooting sewing machine problems are dealt with specific instructions you should follow for solving them.

Machine is working, foot pedal is working, but you just do not get stitches on your fabric. Do the necessary cleaning, bobbin area checking etc. See that the thread is correctly set in the bobbin with the thread passing through the necessary slots.

If the bobbin area is working, the hook area is turning properly, bobbin case is alright, and still if the problem persists, this usually indicates that there is a problem with the timing of your machine or that something is shattered inside somewhere or that something is stuck inside.

The timing of a sewing machine has to be fixed by a sewing machine mechanic.

2.Do a thorough Sewing machine cleaning

Clean up gunk and lint out of the bobbin assembly area

Some problems will go away as soon as you do a simple sewing machine maintenance. You can clean up lint and dust from the parts you can access inside and outside.

You can take out the top thread and bobbin, remove the plastic bobbin cover and the bobbin, the needle plate, take out the bobbin case if you can and brush all the lint and dust build up there, thoroughly, properly. If the bobbin hook has unseen thread tangles you can remove them with tweezers. If the hook has small cuts polish with the finest of sand paper. You can learn more in detail about Sewing Machine Care Guide here.

All sewing machines ought to be taken to a repair shop for deep cleaning every 2 years or so.

3.Ensure that basics are taken care

Usually most minor sewing machine complaints need no repair as such. Some simple actions, other than the above mentioned cleaning, will deal with them.

4.Evaluate whether the machine is worth repairing

Some of the problems you encounter can be self evaluated. Most modern sewing machines are hopeless for DIY repair as they cannot be opened or they may be too fragile for clumsy repair.

Some machines are not worth it to take to a sewing machine mechanic. The repair cost may be more than or just about what it would cost you to get a similar machine. Ask beforehand how much it would cost to repair the particular problem.

Ask if it would cost anything to bring it there for evaluation. Some places charge for even that and give you a bill for service charge. Your problem may still be there, when you get back home.

A machine with metal parts like a metal bobbin case and the oscillating hook is any day more worth repairing than one with a plastic drop-in bobbin case and other plastic parts. The plastic inside parts of the modern machines is usually too flimsy for repair and revival.

A tailor or a seamstress who sews for a living needs a working machine in tip top condition, at all times. And it is heart breaking when the sewing machine decides to go on a lockdown due to hardware problems.

What to do if sewing machine hardware is smashed inside ?

Did the sewing machine fall down? Or you accidentally smashed it with something? Highly unlikely scenarios, but still probable.

If your machine, god forbid, falls down, immediately check whether your needle bar wiggles or not. If it does, the timing of your sewing machine may be off, or something may be shattered inside or the tension dial may have stuck or the bobbin case displaced.

If there is anything smashed inside the machine, it would not run smoothly at all –

You will have skipped stitches, fragmented stitches and all such problems.

If this happens on a modern home sewing machine, you may find it difficult to repair the hardware parts yourself – you will have to take it to the repair shop.

Some parts may be costly and some may even be unavailable. You will be better off buying a new machine, depending on the hardware repair costs.

The cost for hardware repair depends on your repair shop and how much they would charge you for replacing smashed parts, and availability of replacement parts.

On old metal machines, you can replace the parts after opening them up. Those machines can be opened and taken down to their bare frame and then replace most of the parts – if you are a reasonably good sewing machine mechanic.

What to do if – sewing machine hand wheel is not turning

Maybe something is shattered inside or something is stuck under the needle plate. If you have cleaned the whole machine and still this is persisting you may have to take the machine to repair shop. The smashed things inside needs to be taken care of.

Also, ensure that you avoid turning the hand wheel backwards to avoid any future problems with the machine. It should only be turned to the front (towards you)

Final word

My husband drives his car so carefully that we sometimes see cycles passing by – we joke that one day we may even see runners pass by. But this is not me. When I sit behind the wheels of my car, I somehow become Charlize Theron (of the movie The Italian Job). Some reckless current passes through my brain and I start to drive in much the same way that she does, but with a lot less expertise.

Due to some miracle, I am still alive despite of close encounters of the horrifying kind with two trucks, one bus and many many cars. This recklessness is there in me when I use other machines as well, including my sewing machine. So everything that can go wrong, does.

And when it does, I bring out my repair ninja – small scale version.

This post shows you how to maintain, repair, adjust only the simplest of parts, nothing complicated. But let me tell you, I only know this much.

Plug off the machine before doing any repair.

Disclaimer: This is just what I did when I had to, and what I would if I had to – as a nonexpert in sewing machines I take no responsibility for whatever you do to your sewing machines after reading this. But no use not trying to repair a bad sewing machine, right?

Some machines never take DIY repairs very well – Some high end computerized sewing/embroidery machines have too many complications inside that you should never open it up for repair. Give it for repair to a person who knows how to repair, replace and adjust complicated elements in a sewing machine repair.

What to do if your needles get broken? ; What to do if stiches are skipping; What to do if thread bunches under the fabric; What to do when fabric puckers while sewing