Improving students’ conceptual knowledge on optical device materials with computer simulations (original) (raw)
Related papers
Research in Physics Education
This study aims to examine the increase in students’ understanding of the optical geometry concept after being given treatment using the discovery learning model assisted by PhET simulation media and to test the effectiveness of this learning model to improve understanding of the optical geometry concepts. The method used in this research is quasi-experimental and uses the research design The Static Group Pretest-Post-test Design. The sampling technique in this study was taken using purposive sampling, namely where the control and experimental classes were selected based on the suitability of the student’s character with the researcher’s goals. Each experimental and control group consisted of 35 participants. The experimental class used the discovery learning model assisted by PhET simulation media and the control class uses the conventional learning model. The instrument in this study was using a multiple-choice test of 20 questions. Based on the test results of the Independent Sam...
International Journal of Emerging Technologies in Learning (iJET)
Misconceptions take place in a variety of Physics lesson subjects including the Light and Optics. This study aimed at determining the students’ misconceptions and the effectiveness of Active Learning of Optics and Photonics (ALOP) approach assisted by computer simulation to reduce misconceptions among students on the material of optical instruments. The mixed method was employed in this study using embedded mixed method design. The study was conducted to students of grade XI in one senior high school in Bandung. The participants were divided into two groups: control group and experimental group in which each group consisted of 23 students. A conventional learning was applied in the con-trol group while the experimental class implemented ALOP computer-aided simulation learning. The instrument used to identify students’ misconceptions were Four-Tier Optics and Photonics Test (FTOPT), consisted of 18 items, which was given during the pre-test and post-test. The results showed that misc...
The Development of Virtual Laboratory Learning Media for The Physical Optics Subject
Jurnal Ilmiah Pendidikan Fisika Al-Biruni
This study aims to produce virtual laboratory interactive learning media that is effective and practical for the subject of physical optics. It uses the Research and Development (R & D) method. The material in the learning media includes dispersion, diffraction, interference, and polarization. Users of this product can be directly involved in observing, measuring and taking practical data. Product development has been validated by material expert, media expert, and practitioners (teachers). This product has also been tested in one-to-one, small groups, and field trial. Based on the results of the assessment by material expert, media expert, teachers, and field trial, this learning media software is categorized as “excellent” with a value of 4.63 for validity, “medium” with an n-gain value of 0.37 for effectiveness, and “excellent” with a value of 4.49 for practicality.
The purpose of this study was to get an idea of the effect of the use of assessment instruments in the form of animation to test understanding of the concept of refraction of light. The method used is a quasi-experiment with design posttest only nonequivalent control group design. As a control group used items were in the form of paper and pencil tests. Study was conducted on a class X student of SMA Tanjungpinang in Provinsi Kepulauan Riau of academic year 2013/2014. Samples were selected two classes of seventh grade classes were randomly parallel, as a control group and experiment group. Sum of sample of 85 people with 42 people for a percentage of the control class and 43 people for classroom experiments. Data collected after the experimental class and control class equally get learning the refraction of light. Gain control class test in the form of paper and pencil test which amounts to about 20 numbers, and the experimental class to get the test in the form of the same animation and the number 20, numbers matter. The research instrument used was a questionnaire about the pretest and posttest design. Data analysis was conducted using inferential statistics using SPSS 17. Based on the results the average score of the experimental class 74% with a standard deviation of 14 and an average score of 31% control class with a standard deviation of 12. It can be concluded that the test results of students' understanding of the concept of refraction of light that gets items were significantly different in animated form compared to students who obtain items were in the form of paper and pencil test. Understanding students' test results in sub concepts Snell's law, a concave lens and a convex lens using items were in the form of animation is higher than the students who use the items were in the form of paper and pencil tests. Students agree with the use of items were in the form of animation on comprehension tests concept of refraction of light. Students stated that the items were animated very interesting, a better understanding of the issue in question, to understand the purpose and content of questions, and a description of the problem becomes clearer. The use of items was suggested in the form of animation to be developed on other concepts in physics learning
Optics Visualization Web-Based as A Physics Learning Media in Senior High School
Journal of Educational Sciences, 2022
The laboratory has an important role in the learning of physics. The experimental characteristics and abstract concepts of physics that cause difficulties in the physics learning process. Tools and materials are limited often used as an problem in the practicum activities. This study aims to develop a learning media of optics visualization based website as an alternative the limited of laboratory tools. This research includes research and development with ADDIE model (Analysis, Design, Development, Implementation and Evaluate). To collect the data, instrument are used to analyze such as a validation questionnaire. The data analysis were used the Aiken,s V formula. Based on the results of the validity test by experts, the optics visualization learning media web-based was declared valid with an average rating of 0.87 on the design aspect, 0.89 on the pedagogic aspect, 0.88 on the content aspect and 0.84 on the technical aspect. Thus the optics visualization learning media web-based d...
PROCEEDING OF THE 1ST INTERNATIONAL CONFERENCE ON STANDARDIZATION AND METROLOGY (ICONSTAM) 2021
Practicum is an activity that is very important in the physics learning process. In this era of information and technology, many physics simulations can be used in the learning process. These simulations are applications on Android that can be accessed quickly and downloaded for free in the google play store. This opportunity can be used to improve the existing learning process in schools. But how to use this simulation in the learning process is not widely known. We need a study to develop an experimental module using this simulation. The main objective of this study is to create a practical module using a virtual physics laboratory on optical material for junior high schools. The stages of development are needed analysis, preliminary design, validation by experts (learning technology experts and subject matter experts), and product trials by users or student's responses. The virtual laboratory-based learning module that has been developed is classified as very feasible. This shows that these products can be used to support the learning process of grade VIII students. The result is supported by the average respondents' assessment of 82% in the "very good" category. This assessment was obtained from the results of the learning material expert's evaluation of 83% in the "very good" category, 70% of media experts in the "good" category, 85% of colleagues in the "very appropriate" category, User of 81% in the "very good" category, and student responses of 82% in the "very good" category. It is concluded that the physics learning module using the Physics Virtual Lab application is suitable for use as a learning module for junior high school students.
The effort for identifying and overcoming misconceptions of pre-service physics teachers’ on geometric optics should be done continuously. Various kinds of misconceptions diagnostic tests were commonly applied by the lectures still in the form of written tests. The weakness of those kinds of tests are the time needed to check the results that quite long so that students cannot know the test results directly. Remedial that commonly applied were still classical and unable to accommodate the differences on students’ misconceptions. This research aims to develop diagnostic and remedial program-based interactive multimedia in geometric optics called D&R geometric optics. The study also describes the feasibility of the…
Development of Optics Learning Model to Build Mental Models and Problem Solving Ability
Proceedings of the 2016 International Conference on Mathematics and Science Education, 2017
One of the goals of physics instruction should be to enable the students to solve problems in a flexibly way. This requires the students to consider and to use multirepresentations as a natural part of the way they solve problems. This paper presents the results of our research on the development of optics learning model that was designed for the purpose of building mental models and problem solving ability, especially in the topic of light refraction. The learning model is called "ExPRession" model, developed based on one model of PBL namely the Illinois Mathematics and Science Academy (IMSA) model. Furthermore, we integrated the Polya's and Heller & Heller problem solving strategies to IMSA PBL. We implemented our model in a limited test that conducted to 16 students of the 5th semester in physics education at Lampung University who were enrolled in an optics course. The learning model was implemented in three topics such as rectilinear propagation of light, refraction of light on a flat surface, and refraction of light on a curved surface. The results showed that "ExPRression" learning models could be categorized as "valid in contents" and as "valid in constructions", categorized as "practical", and categorized as "effective". The developed learning tools can be classified as a valid and could be used to support the implementation of the "Expression" learning model. The results in limited test showed that "ExPRression" learning model was effective in building mental model and improving aspects of problem solving ability.
Flash Interactive Media to Improve the Mastery of Light Properties Concept
Journal of Primary Education
The purpose of this study is to analyze the effect of flash interactive media in improving students' understanding of concepts in elementary schools. This type of research was mixed methods with an embedded experimental model design. Quantitative data analysis techniques on the variable understanding of the concept, namely the results of the analysis of the students' pretest and posttest questions by using paired sample t-test. The results of the analysis are then triangulated with the qualitative Focus Group Discussion (FGD) data and the results of the interviews. This study involved 54 students who were selected by using the nonprobability sampling technique: purposive sampling. The population consists of 31 public schools and 13 private schools. The results of this study show a significant increase in the concept of understanding in the form of an increase in the average score understanding of concepts by 17.82%. According to questionnaire data that has been distributed, ...
Development and Evaluation of Learning Resource Package in Optics for Grade 10 Science
International Journal of Multidisciplinary: Applied Business and Education Research
Learning complicated topics in Physics is one of the most challenging tasks students experi-ence in the classroom. Physics teachers use supplementary materials and laboratory exercises to help students visualize and imagine what they are studying in order to better understand the topics. These learning aids, however, are sometimes not sufficient. Students would still struggle to learn due to lack of effective teaching materials. Without effective teaching materials, it is impossible to master Physics concepts. The study focused on developing and evaluating a learning resource package in Optics for Grade 10 Science. The results showed that the resource package will provide an effective and alternative method for students to be exposed to the scientific method and to explore and observe what the beauty of physics does in our lives. These are very helpful for teachers when teaching Physics concepts. Furthermore, because the learning resource package is already complete, the teacher m...