Control of Microalgae Growth in Artificially Lighted Photobioreactors Using Metaheuristic-Based Predictions (original) (raw)
Related papers
Model Based Optimal Control of the Photosynthetic Growth of Microalgae in a Batch Photobioreactor
Energies
The present paper investigates the optimal control of the photosynthetic growth process in an artificial light photobioreactor operated in batch mode, the objective being to find an optimal incident light intensity for which the consumption of light energy, for any amount of newly formed biomass, is minimal. By using a simple and reliable model for the photosynthetic growth of microalgae of microalgae, predictions can be made on the quantity of produced biomass and on the amount of light consumed, whose ratio gives the biomass yield on light energy. This variable is unimodal on the allowed range of incident light intensities and has been used as objective function. An improved objective function is proposed by using the specific growth rate and a weighing factor that allows obtaining the desired amount of biomass while the light energy consumption is optimal. A closed-loop control structure has been designed based on the developed optimization algorithm. The optimal controller has b...
2016 24th Mediterranean Conference on Control and Automation (MED), 2016
Controlling microalgae cultivation, i.e., a crucial industrial topic today, is a challenging task since the corresponding modeling is complex, highly uncertain and timevarying. A model-free control setting is therefore introduced in order to ensure a high growth of microalgae in a continuous closed photobioreactor. Computer simulations are displayed in order to compare this design to an input-output feedback linearizing control strategy, which is widely used in the academic literature on photobioreactors. They assess the superiority of the model-free standpoint both in terms of performances and implementation simplicity.
Feedback Linearizing Control of Light-To-Microalgae Ratio in Artificially Lighted Photobioreactors
12th IFAC Symposium on Computer Applications in Biotechnology (2013), 2013
The present paper describes the design and the validation of a lumostatic controller for artificially lighted photobioreactors operated in discontinuous mode. The ratio between the incident light intensity and the biomass concentration, termed light-to-microalgae ratio, was selected as output variable, while its control was provided by manipulating the power supply of a light source and consequently the incident light intensity. The biomass yield on light energy was introduced in order to properly compare the batches operated under constant light intensities with the lumostatic batches. The results obtained in simulation show that a lumostatic batch can yield at least 10% more biomass per mole of supplied photons. The nonlinear controller, synthesized on the feedback linearizing technique, was implemented and validated on a laboratory torus photobioreactor inoculated with Chlamydomonas reinhardtii cells.
Hybrid PSO - Bacterial Foraging Based Intelligent PI Controller Tuning for pH Process
The control of pH process is a difficult problem due to its inherent nonlinearity and time-varying characteristics. For the pH process, Proportional Integral (PI) control has been successfully used for many years. Tuning of the PI controller is necessary for the satisfactory operation of the system. This paper proposes a hybrid approach involving Bacterial Foraging Optimization (BFO) Algorithm and Particle Swarm Optimization (PSO) algorithm for determining the optimal proportional-Integral (PI) controller parameters for control of a pH Process. The BFO algorithm depends on random search directions which may lead to delay in reaching the global solution. The PSO may lead to possible entrapment in local minimum solutions. The proposed hybrid approach has stable convergence characteristic and good computational efficiency. Simulation results clearly illustrate that the proposed approach is very efficient in improving the step response characteristics such as, reducing the Mean Square Error (MSE), rise time and settling in control of a pH process.
Toward Optimal Control of Flat Plate Photobioreactors: the Greenhouse Analogy?
IFAC Proceedings Volumes, 2010
The cultivation of algae in photo-bioreactors shows similarities to crop cultivation in greenhouses, especially when the reactors are driven by sun light. Advanced methodologies for dynamic optimization and optimal control for greenhouses are known from earlier research. The aim here is to extend these methodologies to microalgae cultivated in a flat plate photo-bioreactor. A one-state space model for the algal biomass in the reactor is presented. The growth rate vs. light curve is parameterized on the basis of experimental evidence. Spatial distribution of light and growth rate between the plates is also considered. The control variable is the dilution rate. Dynamic optimal control trajectories are presented for various choices of goal function and external solar irradiation trajectories over a horizon of 3 days. It was found that the algae present in the reactor at final time represent a value for the future. Numerical and theoretical results suggest that the control is bang-(singular-)bang, with a strong dependence on the weather. The optimal biomass also depends on the available light, and achieving it to reach a new optimal steady cycle after a prolonged change in weather may take several days. A preliminary theoretical analysis suggests a control law that maximizes the effective growth rate. The analysis shows that like in the greenhouse case, the co-state of the algal biomass plays a pivot role in developing on-line controllers.
Hierarchical control for microalgae biomass production in photobiorreactors
Control Engineering Practice, 2016
This paper addresses the development of a hierarchical control strategy for microalgal production in a tubular photobioreactor. The proposed control scheme is composed of two layers. On one hand, a lower layer is in charge of tracking a pH set-point by a PI controller plus feedforward compensator, which was used due to its recognized efficiency in industrial control processes. On the other hand, the upper layer calculates optimal pH set-points based on an economic model predictive control approach. The main aim of this control scheme is to maximize profits, computed as the difference between the incomes obtained from the final production sale and the associated production costs (including the environmental impact of the exhausted CO 2 losses). For this purpose, two types of models have been used depending on the requirements of each layer. Simulated and experimental results of the proposed hierarchical control architecture are presented, as well as a comparison with a single-layer architecture with constant reference implemented by the controller used in the lower layer of the hierarchical structure.
Modeling, Analysis, and Intelligent Controller Tuning for a Bioreactor: A Simulation Study
ISRN Chemical Engineering, 2012
In this paper, a novel modeling technique has been attempted to develop the mathematical model for a bioreactor functioning at multiple operating regions. The first principle mathematical equations of the reactor are used with the POLYMATH software to generate essential data for the model development. A relative analysis is also carried out with the existing models in the literature. An optimal PID controller is then designed using a multiobjective particle swarm optimization algorithm. The controller tuning procedure is individually discussed for both the stable and unstable steady state regions. The controller tuned for each region is scheduled using a set-point scheduler to achieve a complete control over the bioreactor. The effectiveness of the proposed scheme has been confirmed through a comparative study with the controller tuning methods proposed in the literature. The results show that, the proposed method provides enhanced performance in effective reference tracking and loa...
Particle Swarm Optimization based PI controller tuning for Fermentation Process
2005
The activities related to Fermentation process are uncertain and nonlinear in nature. It poses many challenging characteristics like multivariable interactions, unmeasured state variables, system and time varying parameters. Generally, PID controllers are used in these processes. Tuning of PID controller is necessary for the satisfactory operation of the system. The tuning of PID controllers depends upon how the process responds to the controllers' corrective effort. The conventional tuning methods like Z-N method and IMC method takes more time, reduces stability and are more sluggish. In this paper, the problem of identifying the PI controller parameters is considered as an optimization problem. An attempt has been made to optimize the values of the PI controller parameters employing Particle Swarm Optimization technique (PSO). From the simulation results it is observed that the PI controller designed with PSO yields better results when compared to the conventional methods.
Automated System for Continuous Microalgae Cultivation in Photobioreactors
Revista de Engenharia Térmica, 2018
The objective of this work was to design a automate system for microalgae cultivation on a continuous modes in laboratory scale and allow its remote monitoring and control. For this, a sensor were developed is able to measure biomass concentration. The concentration sensor used the principle of light scattering, that is, by measuring the turbidity of the culture medium by the use of a set of phototransistor and green led. It presented an mean absolute percentage error of 8.46% during the experiment. A pH, temperature and light sensor were also installed. The control of all the sensors was accomplished by means of an microcontroller. For remote control and monitoring of the controller, a database was designed and implemented on a Raspberry Pi connected to the network. The graphics and data collected are available on an HTML page that allows changes in the control mode of the photobioreactor, for example by changing the dilution rates. The controller was able to operate the photobiore...