Towards Industrial Energy Efficiency Index (original) (raw)
Related papers
Importance of Energy Efficiency in Manufacturing Industries for Climate and Competitiveness
Environmental and Climate Technologies
The manufacturing industry in Europe is currently enfacing one of its greatest challenges due to the emission reductions needed to reach carbon neutrality by the middle of this century. The European Union’s Energy Efficiency Directive and Green Deal will force manufacturing industries to significantly reduce their present energy consumption, but at the same time sustain their competitiveness globally. Here we use the Latvian manufacturing industry as a case to analyse how different macro-level factors have affected its energy use and how the industrial energy efficiency has progressed during the last decade. We apply the Log-Mean Divisia index decomposition method to decompose the energy use in the manufacturing subsectors over the period of the past ten years from 2010 to 2019. The findings unravel the key driving factors of industrial energy consumption, which could serve as a valuable basis for effective energy efficiency policymaking in the future. The results show that energy c...
The Impact of Industrial Energy Efficiency on Economic and Social Indicators
Social Science Research Network, 2020
Inclusive and sustainable industrial development implies environmental friendly industrial growth with positive implications for social targets such as employment generation. One of the most important options available to policymakers for reducing CO2 emissions is industrial energy efficiency, which is particularly relevant for the discussion on green industrialization. Despite this intuitive concept, the economics measurement toolkit still lacks a methodological framework to analyse the extent to which energy efficiency interventions can generate simultaneous economic, environmental and employment-related improvements to boost inclusive and sustainable industrial development. This study fills this gap by introducing an original approach based on input-output tables to estimate the impact of improvements in industrial energy efficiency on value added, employment and energy savings among industries in the Republic of North Macedonia. The results show that triple dividends are possible in terms of inclusive and sustainable industrial development. Whereas a positive impact on employment is found in every scenario, a positive outcome in terms of value added essentially depends on the country's capacity to produce goods that accommodate firms' increasing demand from their use of energy cost savings.
Industrial Energy Efficiency Towards Green Deal Transition. Case of Latvia
Environmental and Climate Technologies, 2021
Energy efficiency policy has been one of the European Union top priorities for decades and will continue to play a vital role in the next 10 years with the introduction of The Clean energy for all Europeans. Likewise, in Latvia energy efficiency has been given high priority; however, the energy efficiency targets for industry has lacked ambitions. This research focuses on evaluating the Latvian industrial energy efficiency policy using top-down approach and benchmarking energy intensity of Latvian industry to the average of the European Union's. Results confirm that on average Latvian industry consumes 2.6 times more energy to produce the same amount of value added compared to the average in the European Union; however, every saved energy unit in Latvia would save twice less CO2 emissions considering already largely decarbonized energy mix. In the spotlights of the Green Deal proposed by the European Commission, much higher contribution in terms of CO2 reduction and energy efficiency will be expected from the industry. Nevertheless, energy efficiency targets for Latvian industry should be sector-specific, separately addressing CO2 intensive sectors, and non-intensive CO2 sectors with low added value.
Energy, 2009
A bottom-up methodological framework was developed and applied for the period 1985-2002, to selected manufacturing sub-sectors in Greece namely, food, beverages and tobacco, iron and steel, nonferrous metals, non-metallic minerals and paper. Disaggregate physical data were aggregated according to their specific energy consumption (SEC) values and physical energy efficiency indicators were estimated. The Logarithmic Mean Divisia index method was also used and the effects of the production, structure and energy efficiency to changes in sub-sectoral manufacturing energy use were further assessed. Primary physical energy efficiency improved by 28% for the iron and steel and by 9% for the nonmetallic minerals industries, compared to the base year 1990. For the food, beverages and tobacco and the paper sub-sectors, primary efficiency deteriorated by 20% and by 15%, respectively; finally electricity efficiency deteriorated by 7% for the non-ferrous metals. Sub-sectoral energy use is mainly driven by production output and energy efficiency changes. Sensitivity analysis showed that alternative SEC values do not influence the results whereas the selected base year is more critical for this analysis. Significant efficiency improvements refer to ''heavy'' industry; ''light'' industry needs further attention by energy policy to modernize its production plants and improve its efficiency.
International comparisons of energy efficiency-Methodologies for the manufacturing industry
Energy Policy, 1997
Industrial energy efficiency is of paramount importance both for conserving energy resources and reducing CO 2 emissions. In this paper, we compare specific energy consumption among countries in fossil power generation, steel, and cement sectors. The evaluations were conducted using common system boundaries, allocation, and calculation methods. In addition, we disaggregate within sectors, such as with blast furnace-basic oxygen furnace (BF-BOF) steel and scrap-based electric arc furnace (Scrap-EAF) steel. The results reveal that characteristics vary by sub-sector. Regional differences in specific energy consumption are relatively large in the power, BF-BOF steel, and cement sectors. For coal power generation and BF-BOF steel production, continual maintenance and rehabilitation are of key importance. We confirm these key factors identified in the previous work on our estimated numerical values. In BF-BOF steel production, corrections for hot metal ratios (pig iron production per unit of BOF crude steel production) and quality of raw materials have a large effect on the apparent specific energy consumption. Available data is not yet sufficient for straightforward evaluation of the steel and cement sectors.
Economic, Environmental and Productive Practices Influence on the Industrial Energetic Efficiency
Revista Gestão & Sustentabilidade Ambiental, 2020
The industrial energetic efficiency (EE) is recognized as one of the main factors for the reduction of gas emissions that cause the greenhouse effect and for the improvement of the industrial competiveness. Within this context, many papers of the international literature have proposed different indicators of industrial, economic and environmental behavior, so as to promote the EE inside the industries. However, such proposals do not generally check the result of the joint work for more than one indicator in the organizations, making more global analysis more difficult related to EE. This paper aims to check which environmental, economic and industrial practices indicators influence the EE of the industries. The data have been collected from the framework developed by Trianni et al. (2014), that analysed the main energetic efficiency measures for the technologies: motors, lighting, compressed air and HVAC systems (heating, ventilation and air conditioning). A logistic regression mod...
Index Approach to Assessing the Energy Efficiency at a Regional Level
2020
The authors propose the Summary Energy Efficiency Index to characterize the efficiency of energy use and energy consumption. The suggested index consists of four pillars: Energy Use, Energy Savings in Public Sector, Smart Consumption, Ecological Footprint. This index enables a comprehensive assessment of energy efficiency mainly on official statistics. Taking into account the structure of end-use electricity consumption in Russia we suggest subdividing regions into four clusters and assessing efficiency of energy use within each cluster. In terms of energy productivity regions with a large share of industry in GRP are rather effective. The level of development of digital technologies in a region is a substantial part of assessing smart energy consumption. However, we should also consider the efficiency of electricity use in the public sector, the development of smart energy and environmental impact, which is essential for sustainable development.
A combined sustainability index for energy efficiency measures
One of the most substantial tools that serve decision makers in their efforts to reduce greenhouse gas emissions includes energy efficiency measures that in most cases benefit from governmental assistance for achieving electricity consumption reduction goals. This paper examines five energy efficiency measures, defining a combined sustainability index. A multi-criteria analysis of five predefined indices was developed (economic, environmental, Technology, social and political), providing a combined index for each measure and a tool for identifying the preferred measure within a specific situation, based on its total sustainability score. In this research, a case study was conducted and the preferred measure was found to be municipal street lighting systems, based on its high political and social scores, and its relatively high installation potential. The second choice would be replacement of chillers in the industrial sector, and the least favorable measure is the replacement of water pumps in the water sector. The methodology described brings into account the technological specifications of the measure implemented, and the specific national conditions under which it is implemented.
The Design of Support Program for Energy Efficiency Improvement in Latvian Industry
"Environmental and Climate Technologies 2013" Conference Proceedings, 2013
The aim of this paper is to assess the voluntary agreement for increasing energy efficiency in industry of Latvia and provide recommendations for more effective implementation in the future. Energy efficiency in Latvian industry and data monitoring of the CCFI (Climate Change Financial Instrument) subprogram "Complex solutions to reduce greenhouse gas emissions in production facilities" is analyzed. An evaluation of the voluntary agreement is given and outlines suggestions for more effective implementation of the Latvian program to achieve the defined energy reduction targets for industry.
Study of Energy Saving Analysis for Different Industries
Journal of Energy Resources Technology, 2020
This study analyzes the energy consumption and saving performance in the industries in the U.S.A. All energy assessments implemented were for facilities whose annual energy consumptions were less than 9,000,000 kWh (small- and medium-sized industries) that belong to the manufacturing industries with Standard Industrial Classification (SIC) codes ranging from 2000 to 3999 in addition to SIC codes starting with 49. In this study, assessments are classified based on the SIC codes with recommendations analysis for each classification to get a better idea of what recommendations were suggested in each major industrial sector, knowing that 68 assessments were made, and their SIC ranged from 14 to 49. In addition, this study could be considered as a guide for energy engineers and other personnel involved in the energy assessment process. The information investigated can give a better prediction for composing better energy-demanding industries and minimizing energy consumption. More than 61...