Internal Fit and Marginal Gap Evaluation of Zirconia Copings Using Microcomputed Tomography: An In Vitro Analysis (original) (raw)
Evaluation of Marginal Gap and Internal Adaptation of All-Ceramic Coping Fabricated With CAD/CAM and Press-Laboratory Technique; an In Vitro Study
amjad alshanti
View PDFchevron_right
Marginal and internal fit of zirconia copings obtained using different digital scanning methods
sergio bernardes
Brazilian Oral Research, 2016
View PDFchevron_right
Marginal and internal fit of CAD/CAM and slip-cast made zirconia copings
Ahmad hasan ahangari
Journal of dental research, dental clinics, dental prospects, 2012
View PDFchevron_right
Multifactorial analysis of the impact of different manufacturing processes on the marginal fit of zirconia copings
Sven Rinke
Dental Materials Journal, 2012
View PDFchevron_right
Marginal Fit Comparison of Hot Isostatic Pressed and Non-Hot Isostatic Pressed Zirconia Copings with Three Different Marginal Finish Lines Fabricated with Two Different CAD-CAM Systems
Cumhur Sipahi
View PDFchevron_right
Evaluation of internal and marginal fit of two metal ceramic system - in vitro study
Febel Huda
Journal of clinical and diagnostic research : JCDR, 2014
View PDFchevron_right
Micro-Computed Tomography Analysis of Fit of Ceramic Inlays Produced with Different CAD Software Programs.
Mutlu Özcan
View PDFchevron_right
Evaluation of the adaptation of zirconia-based fixed partial dentures using micro-CT technology
Alvaro Della Bona
Brazilian oral research
View PDFchevron_right
Evaluation of the absolute marginal discrepancy of zirconia-based ceramic copings
Guillermo Pradíes
The Journal of Prosthetic Dentistry, 2011
View PDFchevron_right
Marginal Fit Evaluation Trough Micro-CT Technology of Pressed vs Milled Ceramic Inlays
Adrian Florea
Revista de Chimie
View PDFchevron_right
Micro-CT evaluation of the marginal fit of different In-Ceram alumina copings
Stavros Pelekanos
The European journal of esthetic dentistry : official journal of the European Academy of Esthetic Dentistry, 2009
View PDFchevron_right
A Comparative Evaluation of the Marginal and Internal Fit of Laboratory-fabricated Monolithic Zirconia Crowns using Direct and Indirect Methods of Scanning: An in vitro Study
Sabita M Ram
Journal of Contemporary Dentistry, 2017
View PDFchevron_right
Influence of preparation angle on marginal and internal fit of CAD/CAM-fabricated zirconia crown copings
Florian Beuer
Quintessence International, 2009
View PDFchevron_right
The effect of various veneering techniques on the marginal fit of zirconia copings
Rashin Giti
The journal of advanced prosthodontics, 2015
View PDFchevron_right
"Comparitive Study of Marginal Fit of Zirconia Copings Prepared With Model-Less And Model Technique-An In Vitro Study"
IOSR Journals
IOSR Journals , 2019
View PDFchevron_right
Comparison of marginal fit in zirconia-based all-ceramic frameworks (cercon) made by two approaches (Direct and Wax-up scanning)
Somayeh Zeighami
View PDFchevron_right
A micro-computed tomography analysis of internal and marginal fits of fixed partial dentures: Effect of preparation finish line designs on monolithic zirconia. and heat-pressed zirconia-reinforced lithium disilicate
Mutlu Özcan
View PDFchevron_right
Marginal adaptation of zirconium dioxide copings: Influence of the CAD/CAM system and the finish line design
RAUL EUAN
The Journal of Prosthetic Dentistry, 2014
View PDFchevron_right
Marginal and internal fit of pre-sintered Co-Cr and zirconia 3-unit fixed dental prostheses as measured using microcomputed tomography
Elie E Daou, Mutlu Özcan
View PDFchevron_right
Comparison of the marginal fit of different coping materials and designs produced by computer aided manufacturing systems
Ender Kazazoglu
Dental Materials Journal, 2011
View PDFchevron_right
Comparing of Marginal and internal fit of Monolithic Zircon crown Fabricated by 3D Printed Die versus Conventional
Amany Korsel
Egyptian Dental Journal, 2018
View PDFchevron_right
Effect of preparation angles on the precision of zirconia crown copings fabricated by CAD/CAM system
Florian Beuer
Dental Materials Journal, 2008
View PDFchevron_right
(In-Vitro Comparison between Closed Versus Open CAD/CAM Systems) Comparison between Closed and Open CAD/CAM Systems by Evaluating the Marginal Fit of Zirconia-Reinforced Lithium Silicate Ceramic Crowns
eran dolev
Applied Sciences, 2021
View PDFchevron_right
Effect Of Different Milling Devices On Marginal Fit Of CADCAM Zirconia Copings On Implant Stock Abutments
Ednaria Vasconcelos
The International journal of prosthodontics, 2021
View PDFchevron_right
Comparative Evaluation of Marginal Fit of Copings Fabricated By Two Different Techniques with Two Different Finish Lines-An Invitro Study
IOSR Journals
View PDFchevron_right
The Use of the FEM to Identify the Optimal Groove Dimensions Ensuring the Least Stressed Connection between a Zirconia Coping and Veneering Ceramic
Beata Śmielak
Materials, 2018
View PDFchevron_right
Evaluation of marginal and internal fit of ceramic crown copings
Alvaro Della Bona
Dental Materials, 2013
View PDFchevron_right
Evaluation of the marginal fit of full ceramic crowns by the microcomputed tomography (micro-CT) technique
Necla Demır
European journal of dentistry, 2014
View PDFchevron_right
Characterization of Non Uniform Veneer Layer Thickness Distribution on Curved Substrate Zirconia Ceramics using X-Ray Micro-Tomography
Masoud Allahkarami
View PDFchevron_right