Reliability estimation of pressurized API 5L X70 pipeline steel under longitudinal elliptical corrosion defect (original) (raw)

Reliability and failure pressure prediction of various grades of pipeline steel

The reliability assessment of various grades of pipeline steel with corrosion defects was conducted through a finite element analysis (FEA) model. The failure pressure of pipelines was also evaluated by three industry models for comparison. Results demonstrate that the failure pressure of pipelines is reduced by the increasing corrosion depth and the decrease of the steel grade. Predictions by ASME B31G and the modified B31G models tend to be higher than FEA results for low grade steels, while the DNV model shows the close result to FEA. The predictive reliability by ASME B31G and the modified B31G decreases with the increases in corrosion depth and the steel grade. The geometry of corrosion defects affects remarkably the local stress and strain distributions, and plays a critical role in the failure pressure prediction. The applied strain in the longitudinal direction simulating the soil strain, regardless of tensile or compressive, would reduce the failure pressure of pipelines.

Study of the reliability of corroded pipeline by the ASME B31G method

Modelling, Measurement and Control B

This work concerns the study of the reliability of 5LX60 steel pipes for the transport of gas under the effect of corrosion failures, particularly corrosion peaks. The objective is to determine the life time of the pipes by estimating the probability of failure based on a parametric approach where the variables are considered. Initially, an ASME B31G-based calculation model is used to calculate the operating safety pressures in the corroded pipes. This method is usually deterministic. The application of a probabilistic method implies the knowledge of the variables and the dimensions, and which give us the reliability of the models used to calculate the pressures.

Failure Probability Assessment for Pipelines under the Corrosion Effect

American Journal of Mechanical Engineering, 2014

In this work, a numerical method was developed, by a reliability mechanical coupling, in order to define the reliability index and probability of failure evolutions for pipelines under corrosion effect. The chosen model, takes into account uniform and localized corrosion. Thus, the hardness and tensile tests were worked out to characterize the mechanical properties of pipelines material. Once the model was defined, a simulation was carried out by the software Phemica. The importance factors were also estimated. A methodology has been presented for the reliability analysis of pipelines subjected to localized corrosion. The variables influencing the reliability are treated as random variables and represented by suitable statistical distributions. An approximate limit state function was developed. Advanced first-order second moment reliability theory was employed for the estimation of the probability of pipeline failure by Phimeca software logiciel. From a numerical investigation, it was found that both defect depth and fluid pressure have significant influences on pipeline reliability.

Reliability of pipelines with corrosion defects

International Journal of Pressure Vessels and Piping, 2008

This paper aims at assessing the reliability of pipelines with corrosion defects subjected to internal pressure using the first-order reliability method (FORM). The limit-state function is defined based on the results of a series of small-scale experiments and threedimensional non-linear finite element analysis of the burst pressure of intact and corroded pipelines. A sensitivity analysis is performed for different levels of corrosion damage to identify the influence of the various parameters in the probability of burst collapse of corroded and intact pipes. The Monte Carlo simulation method is used to assess the uncertainty of the estimates of the burst pressure of corroded pipelines. The results of the reliability, sensitivity and uncertainty analysis are compared with results obtained from codes currently used in practice. r

A probabilistic approach to estimate the remaining life and reliability of corroded pipelines

Journal of Natural Gas Science and Engineering, 2022

Considering corrosion rate during the remaining life assessment of aging pipelines is fundamental to calculate the interval between two consecutive inspections. A total of 798 internal and external corrosion defects have been detected, using the Magnetic Flux Leakage intelligent inspection tool, over 48 km of a pipeline length located in the west region of Algeria. The statistical analysis has shown that there is a strong correlation between the corrosion defect length and the corrosion defect circumferential width, with a significant correlation coefficient equal to 82.87%. A probabilistic methodology is presented for the assessment of the remaining life of a corroded pipeline transporting gas, and a finite element method (FEM) was used to assess the pipeline failure pressure. The numerical FEM modeling results were compared with the commonly used codes-models for calculating limit pressure to establish a more realistic and accurate engineering model. The reliability analysis of an API 5L X60 steel made Algerian natural gas pipeline, in service for thirty years, and exposed to active corrosion attack, is presented. The sensitivity analysis of the basic random variables within the nonlinear limit state function was carried out to bring out the relative contribution of each variable affecting the remaining life of corroded pipelines. The reliability analysis is carried out by using Breitung's formula, based on the second-order reliability method (SORM). The reliability assessment of the corroded pipeline is based on the usage of the notched failure assessment diagram (NFAD), different codes for the calculation of the failure pressure, and the numerical results using the finite element analyses (FEA) software ANSYS.

Reliability based integrity assessment of steel pipelines under corrosion

Corrosion Engineering Science and Technology

Currently, the assessment of mechanical integrity of pipelines damaged by corrosion is performed through deterministic procedures and, in special cases, by using random variables. Rigorously, the calculations require the use of probabilistic methods because they provide the proper framework to include explicitly the uncertainties involved. Some recent treatments consider the corrosion events to be independent, which may lead to errors in estimating the failure probability of the pipeline. In this paper, pipeline integrity is assessed in terms of failure probability and recent models are utilised that estimate the resistance to failure using improved representations of the corrosion defect. Also, a simplified way to consider the space correlation between different segments of a corroding steel pipeline is introduced and the procedure is applied to the specific case where the defect geometry is modelled to be of parabolic shape. The geometrical and mechanical pipeline properties are considered to be random variables; their mean values are taken from experimental results and the interdependence between them is characterised using the model's correlation matrix.

Reliability of the High Strength Pipeline Steel under Corrosion Defect

Acta Physica Polonica A, 2017

The demand of energy based on hydrocarbons, such as gas and oil, requires construction of more and more new pipelines. Therefore, the assessment of the remaining life of these pipeline structures became increasingly important to ensure the continuity of production and distribution operations. The reliability of these industrial facilities is largely conditioned by specific characteristics of each system, by its conditions of use and its environment. Generally, the causes of deterioration of hydrocarbon transportation pipelines are related to the presence of apparent defects (pinholes, cracks, corrosion, etc). This study is aimed to estimate the reliability of pipeline structures. The B31G mechanical model of degradation was used to assess the probability of failure through dimensions of defects.

Pipelines Reliability Analysis Under Corrosion Effect and Residual Stress

2015

This work focuses on a development of a finite element model that simulates corrosion phenomenon and its influence on structure rupture (pipelines). Subsequently, the pitting effect on reliability and pipelines lifetime is studied. In this paper, the investigated structure material is characterized experimentally, in order to determine the maximum strength and stress resistance. Therefore, a numerical model was developed under ANSYS code to simulate different loads to obtain the stress concentration factor as the stresses could surpass the yielding limit in the corrosion impact, and to determine the Von Mises stress. A corrosion model and residual stresses used in the literature are coupled with the probabilistic model to find the limit state function. Thus, failure probability and structure reliability index under the effect of pitting corrosion phenomena are calculated and the obtained results are discussed and analyzed.

Reliability Assessment of Underground Pipelines Under Active Corrosion Defects

Reliability assessment of underground pipeline steel structures for hydrocarbon transmission and distribution systems under active corrosion defects has been investigated. The aim of this work is to obtain a decision-making tool for risk-based inspection and maintenance program. The basic idea consists in statistical analysis of corrosion defect measurements in a buried pipeline as to sort out the corresponding depths and lengths after several years of service. As a result steady corrosion rate model is proposed to estimate the growth in the dimensions of corrosion defects. Then, a degradation model based on ASME modified B31G standard is used as a mechanical model in order to assess the failure probability or the reliability index through defect dimensions and associated uncertainties. Meanwhile, the main assumption of the probabilistic analyses for corroded pipelines is the randomness of load and resistance parameters determining the limit state functions. The statistical distribution of the uncertainties in the parameters involved in the limit state functions is modeled using normal and lognormal distributions. The reliability software PHIMECA is used to compute the reliability index β and the probability of failure Pf, when increasing dimensions of the defect within the respective measured values of depth and length during inspection and maintenance operations. The reliability calculation allows carrying out the sensitivity of the variables according to their importance, their mean value and their coefficient of variation. The probability of failure and reliability index are obtained assuming in one hand constant depth of defect with increasing length and in the other hand a relationship between the depth to length corrosion defect ratio is given as a function of reliability index β. The latter can be used as a parameter for risk-based inspection and maintenance operations.

Numerical model for estimating time-dependent reliability of a corroding pipeline over its lifetime

International Journal of Advanced Structural Engineering

This work aims to evaluate time-dependent reliability of a pipeline under corrosion impact over its lifetime. A finite element corrosion model was proposed, and an empirical power low model is also used and coupled with a probabilistic model for evaluating reliability index about a limit state function. The failure probability of structure was determinate for deferent corrosion rate (low, moderate and high rates), considering corrosion depth. Form method and Monte Carlo simulation are used for evaluating the structure reliability. The impact of applying both effect of corrosion and residual stress is shown which is appears a significant failure probability of the studied pipeline. The found results are analyzed and discussed.