Chitosan–ZnO nanocomposite from a circular economy perspective: in situ cotton-used fabric recycling and the nanocomposite recovering (original) (raw)
Related papers
ZnO nanoparticles-chitosan composite as antibacterial finish for textiles
The antibacterial performance of sol-gel-derived inorganic-organic hybrid polymers filled with ZnO nanoparticles-chitosan against a gram-negative bacterium Escherichia coli and a gram-positive Micrococcus luteus has been investigated. Three different molecular weights (MW) of chitosan (CTS) 1.36 · 10 5 , 2.2 · 10 5 , and 3.0 · 10 5 Da with equal degree of deacetylation (DD, 85%) (coded as S 85-60, He 85-250, and He 85-500) with equal degree of deacetylation (DD, 85%) were examined. ZnO was prepared by the base hydrolysis of zinc acetate in isopropanol using lithium hydroxide (LiOH · H 2 O) to hydrolyze the precursor. Sol-gel-based inorganic-organic hybrid polymers were modified with these oxides and were applied to cellulosic cotton (100%) and cotton/polyester (65/35%) fabrics. Inorganic-organic hybrids polymers were based on 3-glycidyloxypropyltrimethoxysilane (GPTMS). Bacteriological tests were performed in nutrient agar media on solid agar plates and in liquid broth systems using ZnO nanoparticles with average particle size of (40 nm). Our study showed the enhanced antibacterial activity of ZnO nanoparticles chitosan (different MW) of against a gram-negative bacterium Escherichia coli DSMZ 498 and a gram-positive Micrococcus luteus ATCC 9341 in repeated experiments. The antibacterial activity of textile treated with ZnO nanoparticles chitosan increases with decreasing the molecular weight of chitosan.
Synthesis of chitosan/ZnO nanoparticles was performed using different concentrations of ZnO at different temperatures. Nanoparticles of ZnO/chitosan were prepared in rod form with average length 60 nm and average width 5-15 nm. Thus, obtained nanoparticles of ZnO/chitosan were characterized using UV spectrophotometer, FTIR, TEM, X-ray, and SEM. Size and shape of chitosan/ZnO nanoparticles relied on conditions of their synthesis. Notably, chitosan/ZnO in rod form with average length of 60 nm and average width 5-15 nm could be achieved. Application of chitosan/ZnO nanoparticles to cotton fabric conferred on the latter antibacterial and UV protection properties. Cotton fabric was characterized using SEM, ultraviolet protection factor (UPF) rating, and antibacterial (gram-positive and gram-negative) characteristics. Finished cotton fabric exhibited good antibacterial properties against gram-positive and gram-negative bacteria. The UV testes indicated a significant improvement in UV protection of finished cotton fabric which is increasing by increasing the concentration of nanoparticles of ZnO/chitosan.
Polymer Bulletin
A green sustainable strategy for biosynthesis of ZnONPs and chitosan nanoparticles (ZnONPs: 20–25 nm and CSNPs: 70–90 nm) has been developed, their potential applications in multifunctional finishing of cotton and viscose fabrics to impart anti-crease, anti-UV and antibacterial functions using citric acid/Na-hypophosphite CA (15 g/L)/SHP (15 g/L), as CH2O-free ester-crosslinking system and the pad-dry-cure method. The obtained results signify that the extent of improvement in the imparted functional properties is governed by type of cellulosic substrate, kind and concentration of nano-additive as well as type of bio-functional additive, namely, L-ascorbic acid or vanillin (20 g/L each). Moreover, the best results show that using CSNPs (2.5 g/L)/ZnONPs (15 g/L), as an eco-friendly two component mixture, brought about an enhancement in both chemical and functional properties of treated substrates which can be ranked as follows: nitrogen content (N%): viscose (1.818) > cotton (1.592...
RSC Advances, 2015
ZnO and Ag:ZnO nanoparticles were prepared by hydrolysis of zinc acetate in the presence of lithium hydroxide (LiOH). In combination with binders based on hybrid polymer sols, these metal oxide materials were applied for textile treatment. Hybrid coatings based on ZnO, Ag:ZnO/CS, Chitosan (CS), 3-glycidyloxypropyltrimethoxysilane (GPTMS) and tetraethoxysilane (TEOS) prepared by sol-gel method were applied on cotton 100% and cotton/polyester (50/50%) textiles using "pad-dry-cure" technique. The obtained nanoparticles incorporated within chitosan matrix were characterised by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), UV/Vis spectroscopy and field emission scanning electron microscopy (FE-SEM). The antimicrobial activity of Ag/CS, ZnO/CS and Ag:ZnO/CS composite coatings was investigated in comparison to that of the pure chitosan using the paper disc method on Mueller-Hinton agar, against the Gram-negative E. coli and the Gram-positive S. aureus bacteria. For the same composite coatings applied on textile, the antimicrobial activity was investigated by UV /Vis absorption spectroscopy using TTC method, against the bacteria E. coli and M. luteus. The investigated nanocomposite materials showed good antimicrobial activity and are promising materials for use as medical applications.
ZnO/carboxymethyl chitosan bionano-composite was prepared at different temperatures. ZnO/ carboxymethyl chitosan bionano-composite was characterized by UV spectroscopy, FTIR and transmission electron microscope (TEM). The results obtained confirmed the formation of the bionano-composite. The mean sizes of ZnO and carboxymethyl chitosan particles were ≈28 nm and ≈100 nm, respectively. The obtained bionano-composite was used as a finishing agent for cotton fabric to impart UV protection and antibacterial properties (multifunctional finishing) to cotton fabric. The finishing was carried out using pad-dry-cure method. Cotton fabric was characterized by measuring scanning electron microscope (SEM), X-ray diffraction (XRD), UPF ratting and antibacterial properties. Finished cotton fabric exhibits very good antibacterial properties against Gram positive and Gram negative bacteria which increased with increasing the composite concentration and also has a good UV protection which increased with increasing the temperature of curing.
Materials, 2021
This research proposed two pretreatments of viscose fabrics: oxidation with 2,2,6,6-tetramethylpiperidine-1-oxy radical (TEMPO) and coating with TEMPO-oxidized cellulose nanofibrils (TOCN), to introduce functional groups (COOH and CHO) suitable for irreversible binding of chitosan nanoparticles without and with embedded zinc (NCS and NCS + Zn, respectively) and consequently achieving washing durable antibacterial properties of the chitosan nanoparticles functionalized fabrics. The characterizations of pretreated and chitosan nanoparticles functionalized fabrics were performed by FTIR and XPS spectroscopy, elemental analysis, inductively coupled plasma optical emission spectrometry, zeta potential measurements, scanning electron microscopy, determination of COOH and CHO groups content, and antimicrobial activity under dynamic contact conditions. Influence of pretreatments on NCS and NCS + Zn adsorption, chemical, electrokinetic, and antibacterial properties as well as morphology, and...
Nanostructured chitosan (CS) and a chitosan-Zn based (Zn-CS) complex have been synthesized and simultaneously deposited on cotton fabrics using ultrasound. SEM measurements revealed that the coating consists of nanoparticles (NPs) of ca. 40 nm in diameter, homogeneously dispersed along the yarns. XANES studies pointed out that the complex consisted of a less than 2.1 nm ZnO core to which the chitosan was bonded. Additionally, FTIR measurements indicated the in situ formation of a Zn-CS complex which is the only deposited material on the cotton surface. The antibacterial properties of the CS and Zn-CS coated textiles were tested against Gram positive and Gram negative bacteria species.
Present study dealt with the fabrication of chitosan/zinc oxide nano-composites (CZNCs) using a facile preparation method. The structural features of nano-composites were investigated by using advanced analytical techniques. The developed nano-composites exhibited hexagonal structural pattern with an average particle size of about 51 nm. The developed CZNCs were dispersed in 2-propanol and applied on polyester by using the pad-dry-cure method. The treated fabric specimens were characterized for surface, functional and textile properties including antibacterial activity and (ultra violet) UV-blocking. The nano-composite treated polyester fabric exhibited durable antibacterial, UV-blocking and textile properties with fair whiteness index.
Egyptian Journal of Chemistry
A NTIBACTERIAL and easy care characteristics were imparted to cotton fabrics using multifinishing formulation comprising citric acid (CA) and chitosan nanoparticles (CNPs) as an eco-friendly finish. The latter of size around 60-100 nm were prepared through polymerization of meth acrylic acid (MAA) with chitosan using potassium permanganate as initiator and characterized using scanning electron microscope, transmittance electron microscope, Fourier transformer infrared spectroscopy, particle size analyzer, X-ray diffraction and thermo gravimetric analysis. Different factors affecting the degree of multifinishing treatment and their onset on fabric performance and antimicrobial activity were studied and optimized according to pad dry cure method. This was done to see the impact of chitosan nanoparticles to accomplish multifunction characteristics on cotton fabrics like reasonable strength loss, comparable wrinkle recovery angles, elongation at break, higher fabric stiffness and suitable durability in addition to antibacterial activity. It was seen from the attained results that; FTIR spectra and SEM micrograph showed the change in chemical structure and surface morphology of cotton fabric before and after finishing in absence and presence of chitosan nanoparticles. These fabrics parade antimicrobial activity against gram-positive and gram-negative bacteria tested even after 10 washing cycles. Mechanism of finishing of cotton fabric using citric acid and CNPs is identified.
A versatile chitosan/ZnO nanocomposite with enhanced antimicrobial properties
International journal of biological macromolecules, 2015
Porous chitosan membrane was fabricated by casting method using silica particles. Simultaneously nano ZnO was synthesized by green-synthesis method using tung ting oolong tea extract. Chitosan membrane was combined with nano ZnO in order to increase its antimicrobial activity. Through observations obtained from various techniques such as XRD, SEM, FT-IR, UV-visible and fluorescence emission analyses, chitosan was seen to be able to incorporate nano ZnO in the nanocomposite membrane. A blue shift (from 360 to 335nm) was observed in the UV-visible spectrum of nanocomposite and fluorescence emission intensity of nanocomposite was considerably lower than that of nano ZnO. Gram negative organism Klebsiella planticola (MTCC2727) and Gram positive organism Bacillus substilis (MTCC3053) were used to test the antibacterial and antifouling activities of newly synthesized nanocomposite chitosan/ZnO membrane. The nanocomposite chitosan/ZnO membrane promisingly inhibited the bacterial growth whe...