Experiencing circular design: Stories of agri-food waste transformed into new materials for architecture (original) (raw)
Related papers
Circular economy and design for change within the built environment: preparing the transition
2017
The built environment is considered as a key sector in which circular economy can be implemented. Within the H2020 project “Building as Material Banks” (BAMB), two innovative solutions are being forward to support this transition: i.e. Materials Passports and Reversible Building Design Protocols. Based on desk research and interviews with frontrunners, key opportunities and barriers have been identified related to the implementation of both innovative solutions within policy, commercial, societal and R&D realms. In order to better understand these opportunities and barriers five emerging trends putting the current socio-technical system under pressure are explained. In addition, value chain and value network analyses of business-as-usual and stateof- the-art practices have been examined over major building phases: conceptualisation & design, construction, usage/operation, demolition/deconstruction & repurposing. We observed that that it is unlikely that an actor will be involved wit...
IOP Conference Series: Earth and Environmental Science, 2019
The paper presents a part of research focused on the definition of circular economy models in the regeneration of existing building stock in the Italian context, identifying policies improvements, strategic partnership and environmental and economic life cycle assessment tools for supporting decision. Through direct-interviews to operators (investors, designers, manufacturers, etc.), the paper analyses the typical relationships and dynamics among them in the Italian building regeneration process. The operators' opinions and requests towards circular strategies (reuse/recycling at building and material levels) are pointed out, in order to highlight the obstacles and levers of circular economy application. The paper shows the strengths and the weaknesses for the regeneration of building stock by the application of circular economy, the opportunities and the threats for circular economy by its application in the regeneration of building stock. In order to achieve circular requalification processes, avoiding waste and enabling practices of reuse and recycling, the change of relationships, policies and business models are defined. Moreover, the paper discusses on the importance of environmental evaluation of circular practices, identifying the decision steps and operators which, with the support of environmental and economic life cycle assessment tools, can select circular strategies towards sustainable requalification process.
Architecture, Waste, and the Circular Economy
Enquiry The ARCC Journal for Architectural Research
Waste is a modern global crisis. The world is drowning in an unprecedented amount of waste due to an increasing linear economy model that drive societies to consume more every day. It was reported that the average American citizen consume nearly 32 times more that the average Indian citizen. Companies, businesses, and corporates are continuously racing to deplete the planet’s natural resources in an astonishing rate. The design and construction sector alone is responsible for 30-40% of total solid waste worldwide, yet as architects, designers, and planners the waste problem is almost absent from the current discourse, both in practice and academia. Beyond sustainability, and if ideas such as the Dutch “CircularCity” become more appealing to architects, designers, and clients, the architectural education must adopt a transformational shift in the design thinking process to prepare a more responsible future architect. A shift from goal-oriented design to means-oriented design requires...
Circular Economy for Food Policy: The Case of the RePoPP Project in The City of Turin (Italy)
Sustainability
Circular economy for food (CE) and food policies (FP) are two emerging but already prominent research areas, particularly when talking about the cities of the future. This paper analyzes the dynamics between these two fields of research, starting from review articles and the analysis of a case study, underlying the fundaments that FP and CE share. In particular, this paper focuses on using circular economy (CE) indicators and strategies to shape urban food policies (FP) to create a new business and political model towards sustainability. It introduces four converging perspectives, emerging from the literature, and analyzes how they have been integrated in the case study RePoPP (Re-design Project of Organic waste in Porta Palazzo market), a circular project born from the FP of the City of Turin (Italy). RePoPP is indeed a multi-actor project of urban circular food policies against food waste, which demonstrates how a circular approach can be the turning point in the creation of new f...
Application of Circular Economy Principles to Architectural Design: A Case Study of Serbia
Buildings, 2023
The circular economy (CE), as an antidote to the ubiquitous and dominant global economic concept characterized by the uncontrolled exploitation of natural resources and the flow of materials from producers to users to landfills, has become inevitable. The application of circular business models is especially needed in the building sector, as one of the main consumers of natural resources and energy, considerable polluters, and substantial producers of waste. Since architects are important participants in the process of designing and building structures, it is clear that circular principles should be incorporated into architectural design (AD) as well. This paper deals with the analysis of the degree of application of circular principles in AD in Serbia and the challenges and difficulties that architects face in this endeavor. The methods used in the research included an unstructured interview on the basic principles of CE, a case study of selected housing renovation projects in Niš, Serbia (as an illustration of the principles that deal with extending the life of buildings in the domestic environment), and a survey on the degree and importance of the application of the CE principles in AD among architects in Serbia. The case study results and survey results led to the outline of guidelines for future AD in accordance with CE principles and recommendations for creating a working environment for the architects that is more circular oriented.
Design Strategies for Circular Economy
A Circular Economy (CE) values material, technical or biological, as nutrient. CE thinking seeks to accelerate the conversion of technical nutrient cycles along the lines of biological nutrient cycles by redesigning systems till the scale of the economy. Though the notion of products being technical nutrient exists, its situation as an outcome of design intent is not contextually made. One objective of this article is to situate design and nutrient cycles of the earth system as and within natural cycles. This situation emphasizes the mechanism by which design affects nutrient availability to vital earth systems and draws attention to the functions that nutrients afford and serve by default before being embodied in products by human intent. The first principle of CE seeks to eliminate waste and re-purpose nutrients with minimal energy. Towards this, the historic trend of perceiving waste is drawn and Gestalts identified to arrive at the concept of tenancy and inform design. Tenancy is defined as the duration for which the nutrient embodied serves some purpose. Identifying the 6R scenarios as nutrient re-purposing functions, corresponding design strategies are stated.
Building Strategies for Circular Economy: New Visions and Knowledge Production for European Research
2020
This chapter linked the technological strategies fuelling the transition to the circular economy in building sector with the new visions and trajectories of European research. The aim is to highlight possible opportunities to further explore the issues addressed in the previous chapters for the benefit of our readers and the advancement of the discipline. Three topics were identified, which brought together the main theoretical and applicative aspects that were addressed. The first highlights the impact of disruptive technologies that sprawl within the building sector, driven by the overall sustainability target (Sect. 5.1). The second connects the Low-Tech approach in building design to the strategies for remanufacturing that are applied to the whole production processes, aimed at increasing their reversibility (Sect. 5.2), while the third topic focuses on the new requirements of the circular buildings (Sect. 5.3), making them particularly suitable in feeding an innovation dynamic within the sector centred on Low-Tech options.
The paper deals with the results of a research whose aim is to propose some strategies for the achievement of cross-sectorial exchanges of pre-consumer waste/scraps according to a vision of circular economy. Focusing on the building sector, the research starts from the the awareness of the increasingly importance of the issue of scraps/waste, coming from manufacturing activities, within the context of the European environmental policies dealing with eco-innovation, circular economy and industrial ecology. The reasearch has been carried out in accordance with the lines drawn by the Directive 2008/98/CE on waste. The recent Commission Communication COM (2014)398 "Towards a circular economy: a zero waste program for Europe", clearly expresses the approach of the European Union and tries to frame the issue of waste in a broader scenario of policies and strategies for the environment, closely related to the objectives of economic and social growth and innovation of production processes and consumption models. The presented research is centered on the role of information, starting from the assumption that the economic-productive circular model, mentioned by COM (2014)398, implies the rethinking of production and consumption processes according to a model of interconnected phases, in which materials, products and waste can be used in a waterfall approach, with cross-sectorial exchanges from one phase to another. The assumed hypothesis is that the development of databases, common to several sectors, concerning the part of scraps/wastes, that can be considered as a secondary raw material for other sectors, is the initial condition for the implementation of systematic and integrated innovations of production, market and consumption models. According to these assumptions, the paper proposes an information platform structure, able to collect data on scraps and waste flowing from different sectors, in a context of defined geographical areas. In particular, the outcome are: the identification of the most productive sectors (in terms of quantity and quality of production scraps) whose waste are potential secondary raw materials and by-products to be used for the construction sector, and the definition of those data, useful for carrying out LCA evaluations, to be collected from the territory and georeferenced through the use of GIS.
DIY Materials and Circular Economy: A Case Study, Educating Industrial Designers for Sustainability
2018
The article presents an experience based on the design of DIY materials (Do-It-Yourself) as a phenomenon that contributes to the circular economy, making use of household waste and organic binders. The development context is the southernmost Industrial Design School in Latin America, where students are educated through the transfer of knowledge emphasized on the experimentation and territory assessment. Methodology corresponds to the traditional industrial design process, inserting DIY design of materials in the strategic stage. Objective and subjective variables are determined applied in the definition of new materials, being able to determine a range of proposals based on household waste. Citrus × Sinensis, Peperomia caperata (Piperaceae), Radiata pine veneers, among them, which are conceived by students to be self-produced at the user level. The results are materials elaborated based on household waste, exemplified with three types based on organic husks. Beyond findings associat...
Design and circular economy. Architectures that regenerate the built fabric
AGATHÓN - International Journal of Architecture, Art and Design, 2021
Although the circular economy has occupied a crucial place in the development agendas of industrialized countries in recent years, the construction sector still seems far from a mature understanding of the cultural dimensions related to the notion of circularity since, until now, its focus has been mainly on improving technological solutions. However, the circular economy opens up new operational frontiers beyond the scale of the construction detail. It embraces more complex social and cultural fields that ultimately question the changing relationship between man and inhabited space. The article assumes this perspective and examines the possible implications of circular logics’ spatial organizations at larger scales that have a great impact on settlement forms, proposing a critical comparison between two case studies characterized by two built fabrics with different densities. The first one is the regeneration of the Ilot de l’Arc de Triomphe district (high density and compactness), and the second one is the transformation of Contrada Bricconi (low density and rarefaction). The two design experiences ensure a second life to inhabited artifacts and soils.