Preparation and Characterization of Electrospun Polyurethane Nanofibrous Microfiltration Membrane (original) (raw)
Related papers
International Journal of Biological Macromolecules, 2019
Poly(L-lactic acid-co-succinic acid-co-1,4-butane diol) (PLASB) was synthesized by direct condensation copolymerization of L-lactic acid (LA), succinic acid (SA), and 1,4-butanediol (BD) in the bulk using titanium(IV) butoxide as a catalyst. The weight-average molecular weight of PLASB was 2.1Ý 10 5 when the contents of SA and BD were each 0.5 mol/100 mol of LA. Electrospinning was used to fabricate porous membranes from this newly synthesized bioabsorbable PLASB dissolved in mixed solvents of methylene chloride and dimethylformamide. Scanning electron microscopy (SEM) images indicated that the fiber diameters and nanostructured morphologies of the electrospun membranes depended on the processing parameters, such as the solvent ratio and the polymer concentration. By adjusting both the solvent mixture ratio and the polymer concentration, we could fabricate uniform nanofiber non-woven membranes. Cell proliferation on the electrospun porous PLASB membranes was evaluated using mouse fibroblast cells; we compare these results with those of the cell responses on bulk PLASB films.
Biocompatibility studies of electrospun nanofibrous membrane of PLLA-PVA blend
Journal of Applied Polymer Science, 2013
Electrospinning, self-assembly, and phase separation are some of the techniques available for the synthesis of nanofibers. Of these techniques, electrospinning is a simple and versatile method for generating ultrafine fibers from a wide variety of polymers and polymer blends. Poly L-lactide (PLLA) and Poly (vinyl alcohol) (PVA) are biodegradable and biocompatible polymers which are mainly used for biomedical applications. Nanofibrous membranes with 1:9 ratio of PLLA to PVA (8 to 10 wt % and 10 wt %) were fabricated by electrospinning. The percentage porosity and contact angle of PVA in the PLLA-PVA nanofibrous mat increased from 80 to 83% and from 39 6 3 to 55 6 3 , respectively. The water uptake percentage of PVA nanofibers decreased from 190 to 125% on the addition of PLLA to PVA in the PLLA-PVA nanofibrous mat. The nanofiber morphology, structure and crystallinity were studied by Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), and X-ray diffraction (XRD), respectively. The thermal properties were studied by thermogravimetric analysis (TGA) and differential scanning calorimetery (DSC). The biocompatibility studies of PLLA-PVA blend were performed using fibroblast cells (NIH 3T3
Structure and process relationship of electrospun bioabsorbable nanofiber membranes
Polymer, 2002
An electrospinning method was used to fabricate bioabsorbable amorphous poly(D,L-lactic acid) (PDLA) and semi-crystalline poly(L-lactic acid) (PLLA) nanofiber non-woven membranes for biomedical applications. The structure and morphology of electrospun membranes were investigated by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and synchrotron wide-angle X-ray diffraction/small angle X-ray scattering. SEM images showed that the fiber diameter and the nanostructured morphology depended on processing parameters such as solution viscosity (e.g. concentration and polymer molecular weight), applied electric field strength, solution feeding rate and ionic salt addition. The combination of different materials and processing parameters could be used to fabricate bead-free nanofiber non-woven membranes. Concentration and salt addition were found to have relatively larger effects on the fiber diameter than the other parameters. DSC and X-ray results indicated that the electrospun PLLA nanofibers were completely non-crystalline but had highly oriented chains and a lower glass transition temperature than the cast film.
Journal of Nanoscience and Nanotechnology, 2012
Biodegradable poly(L-lactide acid) (PLLA) nanofiber membranes were prepared by electrospinning of PLLA and poly(ethylene oxide) (PEO). The selective removal of PEO by water allows to obtain smaller fiber diameters and to increase the porosity of the membranes in comparison to PLLA membranes obtained under the same electrospinning conditions. After removal of PEO membranes with fiber sizes of 260 nm and average porosity close to 80% are obtained. Thermal and infrared results confirm the poor miscibility of PLLA and PEO, with the PEO randomly distributed along the PLLA fibers. On the other, PLLA and PEO mixing strongly affect their respective degradation temperatures. The influence of the PEO in the electrospinning process is discussed and the results are correlated to the evolution of the PLLA fiber diameter.
Preparation and Characterization of Electrospun TiO2Nanofibers via Electrospinning
Integrated Ferroelectrics, 2015
Poly(L-lactic acid-co-succinic acid-co-1,4-butane diol) (PLASB) was synthesized by direct condensation copolymerization of L-lactic acid (LA), succinic acid (SA), and 1,4-butanediol (BD) in the bulk using titanium(IV) butoxide as a catalyst. The weight-average molecular weight of PLASB was 2.1Ý 10 5 when the contents of SA and BD were each 0.5 mol/100 mol of LA. Electrospinning was used to fabricate porous membranes from this newly synthesized bioabsorbable PLASB dissolved in mixed solvents of methylene chloride and dimethylformamide. Scanning electron microscopy (SEM) images indicated that the fiber diameters and nanostructured morphologies of the electrospun membranes depended on the processing parameters, such as the solvent ratio and the polymer concentration. By adjusting both the solvent mixture ratio and the polymer concentration, we could fabricate uniform nanofiber non-woven membranes. Cell proliferation on the electrospun porous PLASB membranes was evaluated using mouse fibroblast cells; we compare these results with those of the cell responses on bulk PLASB films.
Preparation and characterization of electrospun PLA/nanocrystalline cellulose-based composites
Journal of Applied Polymer Science, 2013
Poly(L-lactic acid-co-succinic acid-co-1,4-butane diol) (PLASB) was synthesized by direct condensation copolymerization of L-lactic acid (LA), succinic acid (SA), and 1,4-butanediol (BD) in the bulk using titanium(IV) butoxide as a catalyst. The weight-average molecular weight of PLASB was 2.1Ý 10 5 when the contents of SA and BD were each 0.5 mol/100 mol of LA. Electrospinning was used to fabricate porous membranes from this newly synthesized bioabsorbable PLASB dissolved in mixed solvents of methylene chloride and dimethylformamide. Scanning electron microscopy (SEM) images indicated that the fiber diameters and nanostructured morphologies of the electrospun membranes depended on the processing parameters, such as the solvent ratio and the polymer concentration. By adjusting both the solvent mixture ratio and the polymer concentration, we could fabricate uniform nanofiber non-woven membranes. Cell proliferation on the electrospun porous PLASB membranes was evaluated using mouse fibroblast cells; we compare these results with those of the cell responses on bulk PLASB films.
Novel biodegradable electrospun membrane: scaffold for tissue engineering
Biomaterials, 2004
Nonwoven fibrous matrixes have been widely used as scaffolds in tissue engineering, and modification of microstructure of these matrices is needed to organize cells in three-dimensional space with spatially balanced proliferation and differentiation required for functional tissue development. The objective of this study was fabrication of nanofibrous matrix from novel biodegradable poly(p-dioxanone-co-l-lactide)-block-poly(ethylene glycol) (PPDO/PLLA-b-PEG) copolymer, and to examine cell proliferation, morphology of cell-matrix interaction with the electrospun nanofibrous matrix. The electrospun structure composed of PPDO/ PLLA-b-PEG fibers with an average diameters of 380 nm, median pore size 8 mm, porosity more than 80% and mechanical strength 1.4 MPa, is favorable for cell-matrix interaction and supports the active biocompatibility of the structure. NIH 3T3 fibroblast cell seeded on the structure tend to maintain phenotypic shape and guided growth according to nanofiber orientation. Good capability of the nanofibrous structure for supporting the cell attachment and proliferation are observed. This novel biodegradable scaffold will be applicable for tissue engineering based upon its unique architecture, which acts to support and guide cell growth. r
International Journal of Electrochemical Science, 2013
Poly(L-lactic acid-co-succinic acid-co-1,4-butane diol) (PLASB) was synthesized by direct condensation copolymerization of L-lactic acid (LA), succinic acid (SA), and 1,4-butanediol (BD) in the bulk using titanium(IV) butoxide as a catalyst. The weight-average molecular weight of PLASB was 2.1Ý 10 5 when the contents of SA and BD were each 0.5 mol/100 mol of LA. Electrospinning was used to fabricate porous membranes from this newly synthesized bioabsorbable PLASB dissolved in mixed solvents of methylene chloride and dimethylformamide. Scanning electron microscopy (SEM) images indicated that the fiber diameters and nanostructured morphologies of the electrospun membranes depended on the processing parameters, such as the solvent ratio and the polymer concentration. By adjusting both the solvent mixture ratio and the polymer concentration, we could fabricate uniform nanofiber non-woven membranes. Cell proliferation on the electrospun porous PLASB membranes was evaluated using mouse fibroblast cells; we compare these results with those of the cell responses on bulk PLASB films.
Poly(lactic acid)-Based Electrospun Fibrous Structures for Biomedical Applications
Applied Sciences, 2022
Poly(lactic acid)(PLA) is an aliphatic polyester that can be derived from natural and renewable resources. Owing to favorable features, such as biocompatibility, biodegradability, good thermal and mechanical performance, and processability, PLA has been considered as one of the most promising biopolymers for biomedical applications. Particularly, electrospun PLA nanofibers with distinguishing characteristics, such as similarity to the extracellular matrix, large specific surface area and high porosity with small pore size and tunable mechanical properties for diverse applications, have recently given rise to advanced spillovers in the medical area. A variety of PLA-based nanofibrous structures have been explored for biomedical purposes, such as wound dressing, drug delivery systems, and tissue engineering scaffolds. This review highlights the recent advances in electrospinning of PLA-based structures for biomedical applications. It also gives a comprehensive discussion about the pro...
Polymers & Polymer Composites, 2022
Poly(L-lactic acid-co-succinic acid-co-1,4-butane diol) (PLASB) was synthesized by direct condensation copolymerization of L-lactic acid (LA), succinic acid (SA), and 1,4-butanediol (BD) in the bulk using titanium(IV) butoxide as a catalyst. The weight-average molecular weight of PLASB was 2.1Ý 10 5 when the contents of SA and BD were each 0.5 mol/100 mol of LA. Electrospinning was used to fabricate porous membranes from this newly synthesized bioabsorbable PLASB dissolved in mixed solvents of methylene chloride and dimethylformamide. Scanning electron microscopy (SEM) images indicated that the fiber diameters and nanostructured morphologies of the electrospun membranes depended on the processing parameters, such as the solvent ratio and the polymer concentration. By adjusting both the solvent mixture ratio and the polymer concentration, we could fabricate uniform nanofiber non-woven membranes. Cell proliferation on the electrospun porous PLASB membranes was evaluated using mouse fibroblast cells; we compare these results with those of the cell responses on bulk PLASB films.