Quantification of Antibiotic in Biofilm-Inhibiting Multilayers by 7.87 eV Laser Desorption Postionization MS Imaging (original) (raw)

Laser desorption 7.87 eV postionization mass spectrometry of antibiotics in Staphylococcus epidermidis bacterial biofilms

Proteomics, 2008

This paper describes the development of laser desorption 7.87 eV vacuum ultraviolet postionization mass spectrometry (LDPI-MS) to detect antibiotics within intact bacterial colony biofilms. As >99% of the molecules ejected by laser desorption are neutrals, vacuum ultraviolet (VUV) photoionization of these neutrals can provide significantly increased signal compared to detection of directly emitted ions. Postionization with VUV radiation from the molecular fluorine laser single photon ionizes laser desorbed neutrals with ionization potentials below the 7.87 eV photon energy. Antibiotics with structures indicative of sub-7.87 eV ionization potentials were examined for their ability to be detected by 7.87 eV LDPI-MS. Tetracycline, sulfadiazine, and novobiocin were successfully detected neat as dried films physisorbed on porous silicon oxide substrates. Tetracycline and sulfadiazine were then detected within intact Staphylococcus epidermidis colony biofilms, the former with LOD in the micromolar concentration range.

Laser Desorption Postionization Mass Spectrometry of Antibiotic-Treated Bacterial Biofilms Using Tunable Vacuum Ultraviolet Radiation

Analytical Chemistry, 2010

Laser desorption postionization mass spectrometry (LDPI-MS) with 8.0-12.5 eV vacuum ultraviolet synchrotron radiation is used to single photon ionize antibiotics and extracellular neutrals that are laser desorbed both neat and from intact bacterial biofilms. Neat antibiotics are optimally detected using 10.5 eV LDPI-MS, but can be ionized using 8.0 eV radiation, in agreement with prior work using 7.87 eV LDPI-MS. Tunable vacuum ultraviolet radiation also postionizes laser desorbed neutrals of antibiotics and extracellular material from within intact bacterial biofilms. Different extracellular material is observed by LDPI-MS in response to rifampicin or trimethoprim antibiotic treatment. Once again, 10.5 eV LDPI-MS displays the optimum trade-off between improved sensitivity and minimum fragmentation. Higher energy photons at 12.5 eV produce significant parent ion signal, but fragment intensity and other low mass ions are also enhanced. No matrix is added to enhance desorption, which is performed at peak power densities insufficient to directly produce ions, thus allowing observation of true VUV postionization mass spectra of antibiotic treated biofilms.

Determination of the ability of matrix-assisted laser desorption ionization time-of-flight mass spectrometry to identify high-biofilm-producing strains

Frontiers in Microbiology

BackgroundThe traditional method for assessing the capacity of a microorganism to produce biofilm is generally a static in vitro model in a multi-well plate using the crystal violet (CV) binding assay, which takes 96 h. Furthermore, while the method is simple to perform, its reproducibility is poor.ObjectiveWe evaluated whether matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) could make it possible to differentiate between high-and low-biofilm-producing microorganisms on 24-h cultures of Staphylococcus aureus and Candida albicans.MethodsWe included 157 strains of S. aureus and 91 strains of C. albicans obtained from the blood cultures of patients with bacteremia/candidemia. We tested biofilm production using the CV binding assay as the gold standard to classify strains as low or high biofilm producers. We then applied MALDI-TOF MS to create a machine learning–based predictive model using 40 strains of S. aureus and C. albicans, each with ex...

Chemical Imaging of Pharmaceuticals in Biofilms for Wastewater Treatment Using Secondary Ion Mass Spectrometry

Environmental Science & Technology, 2023

The occurrence of pharmaceuticals in the aquatic environment is a global water quality challenge for several reasons, such as deleterious effects on ecological and human health, antibiotic resistance development, and endocrine-disrupting effects on aquatic organisms. To optimize their removal from the water cycle, understanding the processes during biological wastewater treatment is crucial. Time-of-flight secondary ion mass spectrometry imaging was successfully applied to investigate and analyze the distribution of pharmaceuticals as well as endogenous molecules in the complex biological matrix of biofilms for wastewater treatment. Several compounds and their localization were identified in the biofilm section, including citalopram, ketoconazole, ketoconazole transformation products, and sertraline. The images revealed the pharmaceuticals gathered in distinct sites of the biofilm matrix. While citalopram penetrated the biofilm deeply, sertraline remained confined in its outer layer. Both pharmaceuticals seemed to mainly colocalize with phosphocholine lipids. Ketoconazole concentrated in small areas with high signal intensity. The approach outlined here presents a powerful strategy for visualizing the chemical composition of biofilms for wastewater treatment and demonstrates its promising utility for elucidating the mechanisms behind pharmaceutical and antimicrobial removal in biological wastewater treatment.

MALDI-guided SIMS: Multiscale Imaging of Metabolites in Bacterial Biofilms

Analytical Chemistry, 2014

Mass spectrometry imaging (MSI) is a versatile tool for visualizing molecular distributions in complex biological specimens, but locating microscopic chemical features of interest can be challenging in samples that lack a well-defined anatomy. To address this issue, we developed a correlated imaging approach that begins with performing matrix-assisted laser desorption/ionization (MALDI) MSI to obtain low-resolution molecular maps of a sample. The resulting maps are then used to direct subsequent microscopic secondary ion mass spectrometry (SIMS) imaging and tandem mass spectrometry (MS/MS) experiments to examine selected chemical regions of interest. By employing MALDI undersampling, the sample surface is left mostly unperturbed and available for the SIMS analysis, while also generating an ablation array that can be used for navigation in SIMS. We validated this MALDI-guided SIMS approach using cultured biofilms of the opportunistic pathogen Pseudomonas aeruginosa; bioactive secondary metabolites, including rhamnolipids and quinolones, were detected and visualized on both macro-and microscopic size scales. MSI mass assignments were confirmed with in situ MALDI MS/MS and capillary electrophoresis−electrospray ionization MS/MS analysis of biofilm extracts. Two strains of P. aeruginosa were compared, wild type and a quorum sensing mutant, and differences in metabolite abundance and distribution were observed.

Evaluation of Surface Microtopography Engineered by Direct Laser Interference for Bacterial Anti-Biofouling

Macromolecular Bioscience, 2015

Biofilm formation by bacterial pathogens on the surface of medical and industrial settings is a 24 serious health problem. Modification of the biomaterial surface topography is a promising 25 strategy to prevent bacterial attachment and biofilm development. However, fabrication of functional biomaterials at large scale with periodic network-topology is still problematic. In this 27 study, we use direct laser interference (DLIP), an easily scalable process, to modify polystyrene 28 surface (PS) topography at sub-micrometer scale. The resulting structure surfaces were 29 interrogated for their capacity to prevent adhesion and biofilm formation of the major human 30 pathogen Staphylococcus aureus. The results revealed that three-dimensional micrometer 31 periodic structures on PS have a profound impact on bacterial adhesion capacity. Thus, line-32 and pillar-like topographical patterns enhanced S. aureus adhesion, whereas complex lamella 33 microtopography reduced S. aureus adhesion both in static and continuous flow culture 34 conditions. Interestingly, lamella-like textured surfaces retained the capacity to inhibit S. aureus 35 adhesion both when the surface is coated with human serum proteins in vitro and when the 36 material is implanted subcutaneously in a foreign-body associated infection model. Our results 37 establish that the DLIP technology can be used to functionalize polymeric surfaces for the 38 inhibition of bacterial adhesion to surfaces.

Detection of In Situ Derivatized Peptides in Microbial Biofilms by Laser Desorption 7.87 eV Postionizaton Mass Spectrometry

Analytical Chemistry, 2007

A novel analytical method based on laser desorption postionization mass spectrometry (LDPI-MS) was developed to investigate the competence and sporulation factorsa pentapeptide of amino acid sequence ERGMTs within intact Bacillus subtilis biofilms. Derivatization of the neat ERGMT peptide with quinoline-and anthracenebased tags was separately used to lower the peptide ionization potential and permit direct ionization by 7.87-eV vacuum ultraviolet radiation. The techniques of mass shifting and selective ionization of the derivatized peptide were combined here to permit detection of ERGMT peptide within intact biofilms by LDPI-MS, without any prior extraction or chromatographic separation. Finally, imaging MS specific to the derivatized peptide was demonstrated on an intact biofilm using LDPI-MS. The presence of ERGMT in the biofilms was verified by bulk extraction/LC-MS. However, MALDI imaging MS analyses were unable to detect ERGMT within intact biofilms.

Bacteriocin Detection from Whole Bacteria by Matrix-Assisted Laser Desorption Ionization-Time of Flight Mass Spectrometry

Applied and Environmental Microbiology, 2003

Class I bacteriocins (lantibiotics) and class II bacteriocins are antimicrobial peptides secreted by grampositive bacteria. Using two lantibiotics, lacticin 481 and nisin, and the class II bacteriocin coagulin, we showed that bacteriocins can be detected without any purification from whole producer bacteria grown on plates by matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF-MS). When we compared the results of MALDI-TOF-MS performed with samples of whole cells and with samples of crude supernatants of liquid cultures, the former samples led to more efficient bacteriocin detection and required less handling. Nisin and lacticin 481 were both detected from a mixture of their producer strains, but such a mixture can yield additional signals. We used this method to determine the masses of two lacticin 481 variants, which confirmed at the peptide level the effect of mutations in the corresponding structural gene.

Visualizing Antimicrobials in Bacterial Biofilms: Three-Dimensional Biochemical Imaging Using TOF-SIMS

mSphere

Bacterial biofilms are groups of bacteria that exist within a self-produced extracellular matrix, adhering to each other and usually to a surface. They grow on medical equipment and inserts such as catheters and are responsible for many persistent infections throughout the body, as they can have high resistance to many antimicrobials. Pseudomonas aeruginosa is an opportunistic pathogen that can cause both acute and chronic infections and is used as a model for research into biofilms. Direct biochemical methods of imaging of molecules in bacterial biofilms are of high value in gaining a better understanding of the fundamental biology of biofilms and biochemical gradients within them. Time of flight-secondary-ion mass spectrometry (TOF-SIMS) is one approach, which combines relatively high spatial resolution and sensitivity and can perform depth profiling analysis. It has been used to analyze bacterial biofilms but has not yet been used to study the distribution of antimicrobials (incl...