Simulative Analyzing of Covering Suburban Areas with 32 × 10 Gbps DWDM-PON FTTH Using Different Dispersion and Power (original) (raw)
Related papers
Single-Carrier 400G 64QAM and 128QAM DWDM Field Trial Transmission Over Metro Legacy Links
IEEE Photonics Technology Letters, 2017
DOI to the publisher's website. • The final author version and the galley proof are versions of the publication after peer review. • The final published version features the final layout of the paper including the volume, issue and page numbers. Link to publication General rights Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights. • Users may download and print one copy of any publication from the public portal for the purpose of private study or research. • You may not further distribute the material or use it for any profit-making activity or commercial gain • You may freely distribute the URL identifying the publication in the public portal. If the publication is distributed under the terms of Article 25fa of the Dutch Copyright Act, indicated by the "Taverne" license above, please follow below link for the End User Agreement:
Simulation of Downlink of 10G-PON FTTH in the city of Košice
Carpathian Journal of Electronic and Computer Engineering
Optical fiber has the great advantages of capacity and reliability. That is why network providers started to deploy FTTx (Fiber-To-The-x) optical access using various PON (Passive Optical Network) architectures. The leading technology right now is Gigabit PON (GPON). However, with increasing amount of multimedia we need to further develop existing technologies to go on with these high demands. Fiber-To-The-Home (FTTH) using 10G-PON technology for broadband access application is effective solution for high speed networks with high capacity. In this paper, we look at the passive optical network in the city of Košice and based on the real network we created simulation model of downlink of 10G-PON based FTTH with triple-play service.
Fully converged optical, millimetre-wave wireless and cable provision in OFDM-PON FTTH networks
2013 15th International Conference on Transparent Optical Networks (ICTON), 2013
This paper reports latest research results demonstrating experimentally the feasibility of the converged provision of optical access, cable and millimetre-wave wireless services fibre-to-the-home (FTTH) networks with a unique technological solution. Transmitting orthogonal frequency division multiplexing (OFDM) modulated signals in FTTH networks permits multi-Gb/s seamless service provision with a unique optical network infrastructure. The use of radio-over-fibre transmission of OFDM signals eliminates the need for re modulation of data format conversion when converged services are distributed.
High-capacity and low-cost long-reach OFDMA PON based on distance-adaptive bandwidth allocation
Optics Express, 2015
We propose and experimentally demonstrate a distance-adaptive bandwidth allocation scheme to realize high-capacity long-reach orthogonal frequency division multiple access passive optical network (OFDMA PON) with cost-effective electro-absorption modulator (EAM). In our scheme, the subcarriers in downstream OFDM signal are properly allocated to the optical network units (ONUs) with different fiber transmission lengths. By this means, the detrimental influence of power fading induced by dispersion and chirp can be avoided, thus all OFDM subcarriers can be modulated with high-order quadrature amplitude modulation (QAM) format, leading to a high transmission capacity. A proof-of-concept experiment is performed, in which three ONUs with transmission distances of 25, 50, and 100 km are assigned with different subcarriers, respectively. By using distance-adaptive bandwidth allocation technique, an OFDM signal of 34.5 Gb/s is successfully delivered to the ONUs with a bit error ratio (BER) lower than 2 × 10 −3 .
Distribution of Double-Sideband OFDM-UWB Radio Signals in Dispersion Compensated Long-Reach PONs
Journal of Lightwave Technology, 2011
The performance of orthogonal frequency division multiplexing ultra wideband radio signals distribution in dispersion compensated (DC) long-reach passive optical networks (LR-PONs) is assessed numerically for conventional chirpless Mach-Zehnder (MZ) and chirped linearized (L) electro-optic modulators (EOMs). The optimum modulation index and the minimum required optical signal-to-noise ratio are evaluated for optical network units (ONUs) at different distances from the optical line termination (OLT). The degradation due to first-order polarization mode dispersion (PMD), fiber nonlinearity, phase noise due to the Kerr effect, and the phase noise due to finite laser linewidth is assessed as well. It is shown that the use of dispersion compensation in LR-PONs employing the MZ-EOM is a powerful solution to mitigate the dispersion-induced power fading. It is also shown that, contrarily to the L-EOM case, the same optimum voltage level at the EOM input is required by DC LR-PONs employing the MZ modulator, independently of the ONUs distances. In addition, an optical signal-to-noise ratio penalty not exceeding 0.5 dB due to first order PMD effect is obtained for a PMD parameter below 0.5 ps km and for a fiber nonlinearity corresponding to a nonlinear phase shift not exceeding 11 mrad. This conclusion holds for pre (at the OLT) and post (at the remote node) compensation schemes. The performance degradation induced by the laser phase noise is also negligible in DC LR-PONs for typical laser linewidths due to the reduced phase-to-intensity noise conversion. Index Terms-Dispersion compensation, long-reach passive optical networks, orthogonal frequency-division multiplexing, ultra wideband. I. INTRODUCTION T HE DISTRIBUTION of orthogonal frequency division multiplexing (OFDM) ultra wideband (UWB) radio signals along optical fiber in the access network has received a special interest over the past few years [1]-[3] due to inherent capacity of increasing the UWB coverage area provided by the wired (fiber based) and wireless networks convergence.
Improve Quality Factor by Using DWDM Technology for Long Distances and Different Power Levels
Journal of Techniques
In optical fiber communications, data travels from the transmitter to the receiver, where it is collected and converted from optical pulses into electrical signals. The need for bandwidth has grown significantly in recent years. Dense Wavelength Division Multiplexing (DWDM), an advanced multiplexing technology that allows multiple signals to be delivered simultaneously at different wavelengths in the same channel, has been developed to meet the demand for higher capacity and faster data rates. There is a decrease in signal quality as a result of the pulse expansion caused by the scattering. During long-distance transportation, scattering should be minimized. In this research, The DWDM link model uses OptiSystem 18. The DWDM design uses 48 channels, 200 GHz channel spacing, and a bit rate of 40 Gbps for each channel The link length used is 240 and 300 km, using SMF (Single Fiber Mode) and DCF (Dispersion Compensation Amplifier). The research was performed with differences in laser po...
Journal of Lightwave Technology, 2019
The current constant growth in mobile networks' traffic demands caused by the popularisation of cloud and streaming services on personal devices, requires architectural changes so as to fulfil all new 5G mobile network requirements. Cloud access radio network (C-RAN) architecture in combination with the massive deployment of small cell antenna sites have recently been proposed as a promising solution but will be demanding for high capacity mobile fronthaul links. An efficient way for performing that connectivity is to make use of the dense wavelength multiplexing passive optical network (DWDM-PON) infrastructure. In this context, OFDM has been extensively explored as a potential candidate. Nevertheless, the main drawback of OFDM is its high out-of-band radiation. In order to overcome that drawback, new 5G multicarrier waveforms (FBMC, UFMC and GFDM) have recently been proposed. In this paper, we experimentally assess and compare 10Gbps 32-QAM-OFDM/FBMC/UFMC/GFDM system performance for high-layer split ultra-DWDM-PON-based fronthaul using a radio-over-fiber technique. The performance has been done in terms of spectral efficiency, peak-to-average power ratio, spectral density and receiver sensitivity. In particular, intensity-modulation with direct-detection and quasi-coherent-detection have been considered. In order to improve the multicarrier system energy efficiency, the effect of using a hard clipping technique over transmitted signals is also studied. Finally, we evaluated the crosstalk interference between two adjacent channels of the same modulation scheme, as a function of their electrical frequency span for downlink application. Index Terms-Filter-bank based multi-carrier, fronthaul, generalised frequency division multiplexing, orthogonal frequency division multiplexing, radio-over-fiber, universal filtered multicarrier. I.INTRODUCTION ith the current exponential growth of the use of cloud and new multimedia streaming services on personal devices, along with the deployment of the "Internet of Things" (IoT) and massive machine-to-machine communications [1]-[4], it is expected that modern macrocell wireless networks will reach Manuscript
2011
WiMAX (Worldwide Interoperability for Microwave Access) is an emerging wireless communication system that can provide wireless broadband access with high data throughput over long distance in a point-to-multipoint and line of sight or non-line of sight environment. There are two main classes of WiMAX called Fixed and Mobile WiMAX. The research objective is to evaluate the performance of Fixed WiMax network within the sub urban area by simulating several scenarios. The scenarios were created based on the changes of system parameters which are base station's antenna height and distance between Base Station (BS) and Subscriber Station (SS). The research is conducted by an open source simulator called NCTUns 5.0, developed by National Chiao Tung University. The Fixed WiMAX topology has been tested and the percentages of data rate degradation with the effects of system parameters were analyzed. Finally, the results obtained show that the performance degrades gracefully with the increasing distance between BS and SS. It is also concluded that 25 meters BS antenna is optimal enough to cover up to 5000 meters area because there is no significant change in the data rate when 50 meters antenna tower is applied.
2011 IEEE 10th Malaysia International Conference on Communications, 2011
This paper presents the capacity and coverage performance analysis of a multiradio multihop network deployment using IEEE802.11n radios for a typical rural area in Malaysia. Insights on the relationships between various key design parameters particularly backhaul link rate, backhaul link distance/multihop distance, coverage size per MAR/total coverage size, number of MIMO spatial multiplex (SM) stream, number of MAR per branch and effective capacity per access point or per user are acquired. Two optimization objectives namely 1) to maximize coverage size and 2) to maximize backhaul distance are introduced.