Experimental Investigation on the Crack Evolution of Marine Shale with Different Soaking Fluids (original) (raw)
Related papers
Fracture and hydraulic fracture initiation, propagation and coalescence in shale
2017
Even though hydraulic fracturing has been in use for more than six decades to extract oil and natural gas, the fundamental mechanism to initiate and propagate these fractures remains unclear. Moreover, it is unknown how the propagating fracture interacts with other fractures in the Earth. The objective of this research is to gain a fundamental understanding of the hydraulic fracturing process in shales through controlled laboratory experiments where the underlying mechanisms behind the fracture initiation, -propagation, and -coalescence are visually captured and analyzed. Once these fundamental processes are properly understood, methods that allow one to produce desired fracture geometries can be developed. Two different shales were investigated: the organic-rich Vaca Muerta shale from the Neuquen Basin, Argentina and the clay-rich Opalinus shale from Mont Terri, Switzerland, which were shown to vary in mineralogy and mechanical properties. Specimen preparation techniques were devel...
Geofluids
In shale development, water-based liquids are injected into the formations. In this process, water can interact with shales, especially with clay content. The interaction can lead to some phenomena, including clay swelling, reduction of mechanical properties of shales and fractures, generation and propagation of fractures, particle detachment, and permeability change. All the phenomena can impact productivity during the development, thereby impacting our investment and return on investment (ROI). So far, many researchers have put their time and efforts into this topic, and many articles have been published. However, some discrepancies still exist in shale reservoirs regarding the role of the interaction between water and shale, especially the impact of clay swelling. Some believe that clay swelling causes formation damage, mainly impairing shale permeability. Others state that fractures can be induced because of clay swelling, leading to the enhancement of shale permeability. So far...
Understanding the post-frac soaking process in multi-fractured shale gas-oil wells
Capillarity, 2024
Multi-stage hydraulic-fracturing horizontal wells has revolutionized today's oil and gas industry. Post-frac fluid soaking is essential for improving productivity of shale oil-gas wells. Optimization of soaking time is an open problem to solve in the petroleum industry. Understanding the post-frac soaking process is vitally important for solving the puzzle. Analytical solutions were developed in this study to describe the spontaneous imbibition processes in shale matrix and shale cracks during fluid soaking. Solutions show that the imbibition distance is directly proportional to the square root of imbibition time and the imbibition velocity is inversely proportional to the square root of imbibition time. The rate of spontaneous imbibition in shale cracks is much faster than that in shale matrix. Therefore, the optimum time for post-frac fluid soaking was further analyzed on the basis of the imbibition in shale cracks only. The solution was combined with pressure fall-off data to formulate a mathematical method for predicting the post-frac fluid soaking time required for the fluid to reach the mid-point between two adjacent hydraulic fractures. A case study with Tuscaloosa Marine Shale data suggests that the front of fluid imbibition should propagate 4 meters in 2 weeks and to 6 meters in 4 weeks. These numbers may be considered as the optimum times of post-frac fluid imbibition if the shale swell effect is negligible. Future research should quantify the effects of shale swelling on spontaneous imbibition so that the information can be incorporated in the soaking model to fully describe the imbibition process for better prediction of well productivity.
Study on the Interaction Mechanism of Hydraulic Fracture and Natural Fracture in Shale Formation
Energies, 2019
Hydraulic fracturing is an essential technique for the development of shale gas, due to the low permeability in formation. Abundant natural fractures contained in a formation are indispensable for the development of a fracture network. In this paper, a damage-stress-seepage coupled hydraulic fracture expansion model, based on the extended finite element method, is established. The simulation results show that shear failure occurs when the hydraulic fracture interacts with a frictional natural fracture, while tensile failure occurs when it interacts with a cement natural fracture. Low interaction angles and high tensile strength of the rock are beneficial for the generation of a complex fracture network. Furthermore, under the same geological conditions and injection parameters, frictional natural fractures are more beneficial for the generation of a complex fracture network, when compared with cement natural fractures. This can not only effectively increase the propagation length of...
Study of hydraulic fracturing processes in shale formations with complex geological settings
Journal of Petroleum Science and Engineering
The influence of geological structures on fracture propagation induced by hydraulic fracturing is studied. • Changes in the injection pressure and fracture permeability are studied as a function of time. • Fracture propagation is limited by geological structures softer than the surrounding rock. • The increase in the injection pressure is slightly higher when fracture propagation is limited by geological structures.
Rock Mechanics and Rock Engineering, 2018
An experimental study was conducted to investigate the effect of fracturing fluid/shale rock interaction on the rock physical and mechanical properties, the proppant embedment depth, and the fracture conductivity. The rich organic shale samples obtained from the Longmaxi (LMX) and Wufeng (WF) shale gas reservoirs, both located in Southern Sichuan Basin in China, were used for the experiments. The degree of proppant embedment upon rock/fluid interaction and resultant conductivity loss was directly measured in both types of rocks. Results show that the degree of alteration of the rock mechanical properties upon rock/fluid interaction depends on the mineral composition and the cementation of the shale matrix. The rock matrix cemented by clay minerals (e.g., LMX shale) was softer and more susceptible to alteration upon the rock/fluid interaction than that of the rock matrix cemented mostly by calcareous materials (e.g., WF shale). The conductivity tests carried out under 60 MPa closure stress have shown that the proppant embedment caused 47.55% reduction in the fracture conductivity of LMX shale samples with 34% clay content. While the fracture conductivity reduction due to proppant embedment was 25.94% in WF shale samples with 7% clay content. Based on the experimental results, it was concluded that upon rock/fluid interaction more significant reduction is expected in the rock physical and mechanical properties of the shale rocks with richer clay contents resulting greater proppant embedment depth and the higher fracture conductivity loss.
Rock-Fluid Chemistry Impacts on Shale Hydraulic Fracture and Microfracture Growth
2012
Rock-Fluid Chemistry Impacts on Shale Hydraulic Fracture and Microfracture Growth. (May 2012) Aderonke Abiodun Aderibigbe, B.Sc., University of Lagos, Nigeria Co-Chairs of Committee: Dr. Robert Lane Mr. David Burnett The role of surface chemical effects in hydraulic fracturing of shale is studied using the results of unconfined compression tests and Brazilian tests on Mancos shalecored at depths of 20-60 ft. The rock mineralogy, total organic carbon and cation exchange capacity were determined in order to characterize the shale. Adsorption tests to study the interaction of the shale and aqueous fluid mixture were also carried out using surface tension measurements. The uniaxial compressive strengths and tensile strengths of individual shale samples after four hours exposure to water, 2.85x10M cationic surfactant (dodecyltrimethylammonium bromideDTAB) and 2.81x10M anionic surfactant (sodium dodecylbenzenesulfonate-SDBS) were analyzed using ANOVA and Bonferroni tests. These mechanical...
Geophysical Journal International, 2020
Hydraulic fracturing plays a vital role in the development of unconventional energy resources, such as shale gas/oil and enhanced geothermal systems to increase the permeability of tight rocks. In this study, we conducted hydraulic fracturing experiments in a laboratory using carbonate-rich outcrop samples of Eagle Ford shale from the United States. We used a thermosetting acrylic resin containing a fluorescent compound as a fracturing fluid. Immediately after fracturing, the liquid resin penetrated in the fractured blocks was hardened by applying heat. Then, the crack was viewed under UV irradiation, where the fluorescent resin allowed the induced fracture to be clearly observed, indicating the formation of simple, thin bi-wing planar fractures. We observed the detailed structure of the fractures from microscopy of thin cross-sections, and found that their complexity and width varied with the distance from the wellbore. This likely reflects the change in the stress state around the tip of the growing fracture. The interaction between fractures and constituent grains/other inclusions (e.g. organic substances) seemed to increase the complexity of the fractures, which may contribute to the efficient production of shale gas/oil via hydraulic fracturing. We first detected acoustic emission (AE) signals several seconds before the peak fluid pressure was observed, and the active region gradually migrated along the microscopically observed fracture with increasing magnitude. Immediately after the peak pressure was observed, the fluid pressure dropped suddenly (breakdown) with large seismic waves that were probably radiated by dynamic propagation of the fracture; thereafter, the AE activity stopped. We applied moment tensor inversion for the obtained AE events by carefully correcting the AE sensor characteristics. Almost all of the solutions corresponded to tensile events that had a crack plane along the maximum compression axis, as would be expected based on the conventional theory of hydraulic fracturing. Such domination of tensile events has not been reported in previous studies based on laboratory/in situ experiments, where shear events were often dominant. The extreme domination of the tensile events in the present study is possibly a result of the use of rock samples without any significant pre-existing cracks. Our experiments revealed the fracturing behaviour and accompanying seismic activities of very tight rocks in detail, which will be helpful to our understanding of fracturing behaviour in shale gas/oil resource production.
Fracturing Fluids Effect on Mechanical Properties in Shales
Proceedings of the 8th Unconventional Resources Technology Conference
The URTeC Technical Program Committee accepted this presentation on the basis of information contained in an abstract submitted by the author(s). The contents of this paper have not been reviewed by URTeC and URTeC does not warrant the accuracy, reliability, or timeliness of any information herein. All information is the responsibility of, and, is subject to corrections by the author(s). Any person or entity that relies on any information obtained from this paper does so at their own risk. The information herein does not necessarily reflect any position of URTeC. Any reproduction, distribution, or storage of any part of this paper by anyone other than the author without the written consent of URTeC is prohibited.
Applied Sciences, 2017
The aim of this study was to identify the influence of reservoir depth on reservoir rock mass breakdown pressure and the influence of reservoir depth and injecting fluid pressure on the flow ability of reservoirs before and after the hydraulic fracturing process. A series of fracturing tests was conducted under a range of confining pressures (1, 3, 5 and 7 MPa) to simulate various depths. In addition, permeability tests were conducted on intact and fractured samples under 1 and 7 MPa confining pressures to determine the flow characteristic variations upon fracturing of the reservoir, depending on the reservoir depth and injecting fluid pressure. N 2 permeability was tested under a series of confining pressures (5, 10, 15, 20 and 25 MPa) and injection pressures (1-10 MPa). According to the results, shale reservoir flow ability for gas movement may reduce with increasing injection pressure and reservoir depth, due to the Klinkenberg phenomenon and pore structure shrinkage, respectively. The breakdown pressure of the reservoir rock linearly increases with increasing reservoir depth (confining pressure). Interestingly, 81% permeability reduction was observed in the fractured rock mass due to high (25 MPa) confinement, which shows the importance of proppants in the fracturing process.