Susceptibility of Prestressing Steel Wires to Hydrogen-Assisted Cracking in Alkaline Media Simulating Concrete Pore Solutions (original) (raw)
Related papers
Hydrogen embrittlement risk of high strength galvanized steel in contact with alkaline media
Corrosion Science, 2011
The critical conditions for hydrogen embrittlement (HE) risk of high strength galvanized steel (HSGS) wires and tendons exposed to alkaline concrete pore solutions have been evaluated by means of electrochemical and mechanical testing. There is a relationship between the hydrogen embrittlement risk in HSGS and the length of hydrogen evolution process in alkaline media. The galvanized steel suffers anodic dissolution simultaneously to the hydrogen evolution which does not stop until the passivation process is completed. HSGS wires exposed to a very high alkaline media have showed HE risk with loss in mechanical properties only if long periods with hydrogen evolution process take place with a simultaneous intensive galvanized coating reduction.
Engineering Failure Analysis, 2021
Hydrogen gas is a renewable energy source for electrical and transportation fuel for vehicular applications. However, the storage and transportation of hydrogen gas are challenging because of its very nature and impact on pipelines and storage tank/facility materials. This paper investigates the influence of hydrogen on the candidate fracture toughness (K Q) of low carbon steel immersed in acidic hydrogen environments for one year which has limited previous research. Steel specimens were coated from all sides except one surface to accurately quantify the influence of hydrogen diffusing from the environments into the specimens. Specimens were tested for crack tip opening displacement (CTOD) fracture toughness at six-and twelve-month intervals of immersion in acidic environments. Before K Q testing at various intervals, the hydrogen contents of the specimens were determined by an electrochemical approach. Based on test results, models for the degradation of K Q of steel were developed in accordance with the proposed hydrogen-enhanced localized plasticity (HELP) and hydrogen-enhanced decohesion (HEDE) model (HELP + HEDE model) of hydrogen embrittlement. Furthermore, fractography of the specimens was performed to observe the synergistic action of HELP and HEDE mechanisms (HE), and their subsequent effects on the microstructure and fracture resistance of steel. The significance of the research is highlighted by its practical application for assessing the durability of steel structures and infrastructure against hydrogen environmental assisted cracking (HEAC). Furthermore, this paper highlights the synergistic activity of HELP and HEDE mechanisms of HE in steel and the importance of developing structures for storing hydrogen on a large scale.
The Effect of Hydrogen on Failure of Complex Phase Steel under Different Multiaxial Stress States
Metals
The demand for advanced high-strength steel (AHSS) in the automotive industry has increased over the last few years. Nevertheless, it is known that AHSSs are susceptible to hydrogen embrittlement. Therefore, the influence of hydrogen on the localization and damage behavior of a CP1000 steel sheet was investigated in this work. The sheet metal was electrochemically charged to a hydrogen content of about 3 ppm (by weight). Tensile tests were performed at different nominal strain rates between 0.00004 s−1 and 0.01 s−1 to investigate the effects of strain rates on their susceptibility to hydrogen embrittlement. Nakajima tests were utilized to investigate the hydrogen effects on the steel’s formability under different stress states. Three different Nakajima specimen geometries were employed to represent a uniaxial stress state, a nearly plane strain stress state, and an equibiaxial stress state. Further, forming limits were evaluated with the standardized section line method. Hydrogen em...
Metals, 2018
The presence of a conductive layers of hot-formed oxide on the surface of bars for pre or post-compressing structures can promote localized attacks as a function of pH. The aggressive local environment in the occluded cells inside localized attacks has as consequence the possibility of initiation of stress corrosion cracking. In this paper, the stress corrosion cracking behavior of high strength steels proposed for tendons was studied by means of Constant Load (CL) tests and Slow Strain Rate (SSR) tests. Critical ranges of pH for cracking were verified. The promoting role of localized attack was confirmed. Further, electrochemical tests were performed on bars in as received surface conditions, in order to evaluate pitting initiation. The adverse effect of mill scale was recognized.
Hydrogen effect on fracture toughness of pipeline steel welds, with in situ hydrogen charging
International Journal of Hydrogen Energy, 2011
The API 5L X70 and X52 pipeline steel weld fracture toughness parameters are measured in a hydrogen environment and compared to the ones in air. The hydrogen environment is created by in situ hydrogen charging, using as an electrolyte a simulated soil solution, with three current densities, namely 1, 5 and 10 mA/cm 2. A specially designed electrolytic cell mounted onto a three-point bending arrangement is used and hydrogen charging is performed during the monotonic loading of the specimens. Ductility is measured in terms of the J 0 integral. In all cases a slight change in toughness was measured in terms of K Q. Reduction of ductility in the base metal is observed, which increases with increasing current density. A more complex phenomenon is observed in the heat affected zone metal, where a small reduction in ductility is observed for the two current densities (1 and 5 mA/ cm 2) and a larger reduction for the third case (10 mA/cm 2). Regarding microstructure of tested X70 and X52 base and HAZ metal, it is observed that the hydrogen degradation effect is enhanced in banded ferriteepearlite formations. The aforementioned procedure is used for calculating the fracture toughness parameters of a through-thickness pipeline crack.
Influence of hydrogen on plasticity around the crack tip in high strength steels
Engineering Fracture Mechanics, 2017
Fracture mechanics concepts applied to tests in aggressive environments are a challenge for integrity analysis. Specifically about hydrogen, the concentration of this element in defects or in trapping sites can cause unexpected failure. The present paper presents results showing the influence of hydrogen in the reduction of fracture toughness and a discussion about how to deal with it in high strength alloys. The results show that the hydrogen reduces the plasticity and consequently the applications of CTOD concepts are questionable for the studied materials.
Sub critical crack growth in hydrogen assisted cracking of cold drawn eutectoid steel
Corrosion Science, 2007
The fracture behaviour of eutectoid cold drawn steel wires under constant load in hydrogen charged condition was evaluated. Hydrogen charging was obtained by dipping steel wires in ammonium thiocyanate solution. Sub-critical crack growth was monitored by means of Acoustic emission (AE) technique. Fractographic analysis revealed a mixed mode crack propagation (mode I and mode II) characterized by a multi-terrace appearance of the surface fracture. A modification of the macroscopic mechanical behaviour of the steel was also evidenced by micro hardness measurements. A simplified stress-assisted hydrogen diffusion model was used to interpret experimental observations and to estimate a theoretical crack propagation rate. Such a value was in accordance with that obtained from the analysis of AE data.
THE INFLUENCE OF MICROSTRUCTURE OF 30MnB4 STEEL ON HYDROGEN-ASSISTED CRACKING
Metallurgy and Foundry Engineering
This paper analyzes the problem of susceptibility to hydrogen-assisted cracking (fracture behavior) of zinc-coated screws made of 30MnB4 steel. Two samples (screws) were compared after proper and improper heat treatment affecting hydrogen solubility during the further galvanic process and resulting in different fracture modes. Both samples were loaded to failure by torsion. The fracture surface and microstructure of the samples were examined using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS).
Fracture criterion for hydrogen embrittlement of high strength steel
Materials Science and Technology, 2006
The notch tensile strength of a boron bearing steel at 1305 MPa has been investigated by means of slow strain rate tests after electrochemical hydrogen charging. Results show that the notch tensile strength of the steel decreased with increasing diffusible hydrogen content and the decrease in the notch tensile strength was more pronounced for specimens at a higher stress concentration factor. Finite element analysis results show that the dependence of the notch tensile strength on stress concentration factor cannot be accounted for by the local peak stress and local peak hydrogen concentration; however, the equivalent plastic strain at the notch root at an applied stress equal to the notch tensile strength was independent of stress concentration factor. The equivalent plastic strain at the notch root can be used as a fracture criterion for hydrogen embrittlement of the steel.