Experimental study and analysis of porous thin plate drying in a convection dryer (original) (raw)
Related papers
Energy and exergy analyses in drying process of porous media using hot air
International Communications in Heat and Mass Transfer, 2010
In this paper the energy and exergy analyses in drying process of porous media using hot air was investigated. Drying experiments were conducted to find the effects of particle size and thermodynamics conditions on energy and exergy profiles. An energy analyses was performed to estimate the energy utilization by applying the first law of thermodynamics. An exergy analyses was performed to determine the exergy inlet, exergy outlet, exergy losses and efficiency during the drying process by applying the second law of thermodynamics. The results show that energy utilization ratio (EUR) and exergy efficiency depend on the particle size as well as hydrodynamic properties. Furthermore, the results of energy and exergy presented here can be applied to other porous drying processes which concern effect of porosity as well as grain size.
Study of heat and mass transfer in porous media: application to packed-bed drying
Fluid Dynamics and Materials Processing
This work focuses on tyipical heat and mass transfer phenomena during the processing of products in the context of the packed-bed drying method (products arranged in thick layers into dryers working in forced convection mode). The dryers are modeled as porous media at the macroscopic level. The simulations are carried out using the mass, momentum (written in the framework of the Darcy’s law approximation) and energy equations applied for the different components. A diffusion model based on Fick’s law is also used to take into account the drying kinetics. This approach allows monitoring of the variations of humidity and temperature (of the medium and the heated air) in time and space. A non-homogeneous drying of the different layers is observed. It is found that the process is strongly affected by external conditions (in particular, the temperature of the heated air).
Supplementary 6, 2020
Drying is a process to increase the shelf-life of fruits by decreasing their water content. It is one of the energy consuming processes in food engineering. In many studies, the drying time duration and quality of dried fruits were investigated. In this study, the energy consumption in different drying conditions was investigated for the apple in a laboratory convection dryer. The drying conditions were the application of the temperatures of 40, 50, and 60°C and the speeds of 0.5 and 1 ms-1 for the drying air using the insulated and non-insulated drying chambers. Independent from drying duration, the highest energy consumption was recorded as 11.2 kWh for the non-insulated dryer under the drying air condition of 40°C and 0.5 ms-1 . While the lowest energy consumption was only 5.8 kWh for the insulated dryer with the drying air condition of 40 and 50°C and the same 0.5 ms-1 . The drying duration for these conditions was 537, 313, and 233 mins. To achieve the shortest drying time (153...
Biomechanism and Bioenergy Research, 2022
In this study, a pilot solar thin-layer dryer was designed and constructed. This dryer was equipped with an air-to-air cross-flow plate heat exchanger. An aluminum plate with a different design was used instead of holes in its surface. The collector, the airflow hitting the absorbent plate and passing through the surface of the pipes embedded on the absorbent plate received thermal energy and transferred it to the dryer chamber. Using the randomize complete design, influence of thickness of product in three levels of 3, 5 and 8 mm, three levels of air velocity of 0.5, 1 and 1.5 m/s and 2 modes with and without the use of heat exchanger on drying time of onion slices was studied. The crop thickness and airflow velocity had a significant effect on reducing the drying time of onion slices and the effect of crop thickness was greater than airflow velocity. However, the heat exchanger did not have a significant effect on drying time and collector efficiency.
Heat and mass transfer in fixed bed drying of non-deformable porous particles
International Journal of Heat and Mass Transfer, 2016
A drying model for non-deformable porous spherical particles in a fixed bed passed by a drying agent was developed. The model was based on coupled moisture and heat balance equations, where the moisture molar flux evaporated from a pore was estimated according to the diffusion through a stagnant gas layer. Model equations included various process factors, e.g., characteristic parameters of porous particle (diameter, porosity, and pore tortuosity), fixed bed particles (void fraction, height, initial moisture content, and initial temperature), and drying agent (superficial velocity, input humidity, and initial temperature). Particle porosity and pore tortuosity were selected as adjustable parameters. An experimental study on air drying of fixed bed activated carbon was conducted and the adjustable parameters were fitted based on experimental data. Values of 0.28 ± 0.04 m 3 /m 3 for particle porosity and 1.25 ± 0.15 for pore tortuosity were obtained under studied operating conditions. The drying was faster with an increase in air superficial velocity (0.04-0.42 m/s) and initial air temperature (25-45°C). The model predicted accurately different experimental data and it could be used in designing and optimizing the convective drying of fixed bed porous particles.
Renewable Energy, 2010
In this study, a numerical procedure is outlined and representative results for heat and mass transfer during convective drying of porous bodies are presented. The Luikov model was implemented and applied both on individual samples of construction materials and agricultural products, as well as on a drying-chamber scale, with parallel flow of a hot air stream over rectangular slabs which represent the product to be dried. In the latter case the configuration is an experimental dryer in which the heat source is a solar air collector with evacuated tubes. A general approach was developed that allows a selection between modelling of phenomena either in the drying solid only, or considering an extended simulation domain encompassing, apart from the solid body, the flow of air as well. In the second case, the solution of the flow field is pursued along with a conjugate heat/mass transfer problem coupling the solid and fluid phenomena and in both cases phase change (evaporation) was taken into account. For the numerical simulation, the finite-volume method was used. The validation of the model was based on experimental and numerical results from the literature and results from simulations that were conducted in the pursuit of the energetic optimization of an experimental solar dryer of NCSR ''Demokritos'' are presented. In the latter case, the effect of the particular flow field features developing for a single and a double-plate configuration on the heat/mass transport and drying rates is demonstrated. Such a methodology could be used to analyze the transport phenomena in any type of convective dryer, including those utilizing solar energy as the heat source.
International Journal of …, 2002
A numerical study is carried out to investigate the in¯uence of multistage drying regimes on the drying kinematics of a porous material. In particular the effects of varying the conditions of the drying medium are studied. The drying model for the solid is developed based on the continuum approach. A series of simulations of the drying behaviour of a rectangular brick with varying temperature, heat transfer coef®cient and relative humidity of the drying medium are undertaken. It is found that the total drying time is mainly dependent on the relative humidity of the drying medium. Also condensation is predicted on the surface of the brick, with the quantity of condensation being directly linked to the relative humidity and temperature of the drying medium. Overall it is concluded that multistage drying regimes are useful in reducing the overall drying time whilst avoiding detrimental shrinkage during the constant drying period.
A numerical study on drying of porous media
Korean Journal of Chemical Engineering, 2008
In this study, two-dimensional conjugate heat and mass transfer in porous body and drying air during the drying process were numerically investigated by finite volume (FV) method, which guarantees the conservation of mass, momentum and the energy during the numerical solution. The full NS-equations (including buoyancy terms), energy equation and concentration equation are considered for external flow and for porous field coupled energy and moisture transfer equations are used. The numerically captured curve shows the same behavior of the drying process. Drying flow velocity shows proportional effect on moisture removal rate with a factor between 1 / 4 and 1 / 5 in Reynolds range of 50 to 1,000. Also, buoyancy forces have an effect on flow streamlines, the distribution of vapor concentration, moisture profile, and considerably increase drying rate. This increment was investigated in Reynolds number range of 50 to 1,000, and its minimum value was found in a Reynolds number of 1,000, which was about 15 percent.
E3S Web of Conferences
The possibility for a reduction of the time duration of an industrial drying of ceramic bricks are analysed based on numerical simulation of the transient coupled mass transfer and mechanical processes in the material. The differences between the local mechanical stresses and strength in the dried bodies are computed and used as a criterion for this possibility. Ways for reorganization of the existing process parameters in the dryers to achieve the corrected drying kinetic curve are discussed. The expected effects on the efficiency of the drying installation are evaluated via material and thermal balance.