Conceptual Design of a Primary Trainer Airplane (PTA)* (original) (raw)
Related papers
Wing Structural Design For Two-Seater Trainer Aircraft
2017
The wing of aircraft is designed according to the mission or operational purposes. In the design, maintenance and operations of training aircrafts, cost, reliability and safety are some of the most important parameters to consider. Wing performances are not just determined by their aerodynamic characteristics but also their structural characteristics which is the ability to sustain both internal and external loads. In addition to the internal weights of the spars, ribs, stringers, landing gear and tanks, the fuel load and aerodynamic loads are external forces that act on the structure and exert pressure on it. This paper will concentrate on the structural design of the wing of a two-seater trainer aircraft. The report addresses both modeling and simulation in order to evaluate the wing structural performances. The modeling is performed using SolidWorks and the simulation using ANSYS. Also, a MATLAB m-file coding is used to generate the wing external dimensions. The result of the simulation is then analyzed and interpreted. At the end, a construction of V-n diagram for the designed wing is achieved.
Conceptual Aircraft Design [Электронный ресурс] : Term Project Guideline
2011
The aim of this manual is to briefly acquaint readers with the theoretical basis of methods and models that are used in the conceptual airplane design, to develop and consolidate the understanding of relations between main parameters and characteristics of the airplane and also to prepare students for performing their graduation works. The manual summarizes experience of teaching aircraft designing disciplines in SSAU. The second edition comprises the significant corrections for the purpose of increasing the accuracy of project estimations and taking into account current achievements of the world aircraft industry. A new section is devoted to applying methods of scientific and technical forecasts while processing statistics. The manual is dedicated to support class and laboratory lessons and a sketch part of the graduation work for the specialties 160201 Airplane and helicopter construction and 160901 Technical maintenance of aircrafts and engines, and also for executing the term projects and for the Masters programme «Designing, construction and CALS-technologies in Aeronautical Engineering » for education direction 160100.68 «Aeronautical Engineering».
A four-seat light airplane design
10th Australian International Aerospace …, 2003
Malaysia produces two-seat light airplane through two firms, SME Aerospace Sdn. Bhd. and Eagle Aircraft Sdn. Bhd. As these airplanes are limited to recreational, flight training and acrobatic activities, a four-seat airplane was proposed. Financed by the Ministry of Science and Technology, a research team was formed.
Aircraft Design Projects for Engineering Students
Preface xiii xvi xvii Contents vii 4.8.3 Field performance studies 86 4.8.4 Wing geometry studies 87 4.8.5 Economic analysis 91 4.9 Initial 'type specification' 96 4.9.1 General aircraft description 96 4.9.2 Aircraft geometry 97 4.9.3 Mass (weight) and performance statements 97 4.9.4 Economic and operational issues 98 4.10 Study review 99 References 100
DESIGN OF A WORKING MODEL HOVERCRAFT PERPUSTAKAAM LJNiVERSiT I MALAYS4A PAHANG
This thesis is the design of a small-scale working model hovercraft which providing fully hovercraft basic functions. This final year project carry out by the author to fulfillment the requirement for award the degree of Bachelor Manufacturing Engineering. This designed hovercraft which has two stages of development and included two models. The first model is for PSM 1 and the second and fully functional model is for PSM 2. Basically, the hovercraft design and fabrication process is quite similar to boat, ship, or aircraft design. In this report, I had made the entire analysis requirement, formulas for thrust and lift, drag components calculation and other important parameters to realization the design of the working model hovercraft. On the other hand, this report is aim to provided objective and scope of the research, the literature review study, research methodology, and fabrication process with result analysis and conclusion as part of requirement in submitted the report to PSM supervisor. Although hovercraft research and development is still new technology in Malaysia and no domestic consumption in this technology, but through this project it can help the industry a step further. It is because this project can categorized as successful and working as expected. Finally, I wish this project can carry on research and design development by interest manufacturing students.
In the next twenty years, civil transport aircraft are requested to reduce the Direct Operative Costs by 30% and to cut noise and noxious emissions. It is generally accepted that these results can be hardly obtained by improving the efficiency of the to-day conventional aircraft, because their efficiency, as a result of decades of progresses, is close to the top. So, a great interest is now devoted towards new non conventional aircraft for the civil aviation of the future. In Italy, five Universities carried out a preliminary aerodynamic project of a non conventional transport aircraft, in which the aerodynamic efficiency can improved through a strong reduction of the induced drag. The starting point of the project is a theoretical result by Prandtl, published in 1924, showing that the lifting system with the minimum induced drag, under certain conditions, is a wing box in the front view and, in honour of Prandtl, the aircraft configuration has been named as "PrandtlPlane"...
The Design of Light Jet Aircraft
This paper discusses the design of light jet aircraft (LJA) in the university level. The design process that covers by this paper is just from conceptual approach. Current technical information of the light jet aircraft in the market will be studied for competitor analysis purpose. After that, the calculation process will take part, like initial sizing, performance sizing, initial sizing of main component, weight breakdown, cg (centre of gravity) position and aircraft performance. It concludes with a discussion of the results and recommendations for future work. This paper will only concentrate on conceptual design, the next stage of design can be continuing in future with the data from this paper.
Preliminary Structural Design of Light Sport Aircraft (LSA)
Preliminary Structural Design of Light Sport Aircraft (LSA), 2019
This thesis focuses on using FAR 23 software to analyze a preliminary design of a light sport aircraft. It is a continuation of design study on a particular design of a light sport aircraft which is previously designed by a student of UTHM, Hazreen Hazman. In this thesis, it also illustrate the envelop of loads and many loading data obtained via FAR 23 software.
Aircraft Design Projects For Engineering Students by J.R. Jenkinson, J.F. Marchman
Written for students of aeronautical engineering and based on a range of detailed aircraft design projects, this wide-ranging book draws together the elements of aircraft design and will support any aircraft design project. Written by experienced U.K. and U.S. based authors this is a unique resource that opens up the initial design process, explores the experience of others on similar projects, and clarifies the processes that are behind the equations and calculations used in aircraft design. Armed with this knowledge, readers will be freer to concentrate on the innovative and analytical aspects of their own project work. Key features include: demonstration of how the basic design process can be successfully applied to a wide range of aircraft; highly illustrated case studies that provide a valuable teaching and learning tool, examining how others have approached particular design challenges; and coverage of commercial, military, and concept aircraft design, plus award winning student projectsthat offer an insight into the conceptual design process from the student perspective.